What is the difference between full body tiles and non full body tiles?

The surface of the whole body tile is not glazed, and the material and color of the front and back are the same, and the whole body brick is a wear-resistant brick;

Non-full-body tiles are bricks whose surface has been glazed.

Full-body bricks are becoming more and more fashionable and are widely used in halls, aisles and outdoor walkways. Non-full-body ceramic tile is the most common type of brick in decoration, which is widely used in walls and floors due to its rich color patterns and strong anti-fouling ability.

The meaning of the whole brick is that the upper and lower are of the same material, also called the same brick, the same brick, which means the same material, and there are also the whole brick Homogeneous brick is made of stone grinding into powder, and then fired at high temperature and high pressure, the delicacy of the powder is related to the quality of the brick, the density of the pressing and the temperature of firing, and also affects the quality of the brick. The identification is very simple, the front and back of the brick with the same color and the same color after firing the brick if the surface has not been treated, the roughness of the intentional processing, it is the homogeneous anti-slip brick, some bricks do not add coloring powder in the powder, and the glaze is applied on the surface, which is the homogeneous glazed brick. If the surface is polished after firing, it is a polished glazed tile, also called a polished tile.

No glaze is applied to the polished tile surface. If in the production process, the powder is very delicate and the firing temperature is higher, then the surface will be vitrified in the firing process, for example, it is like glass, then it is called vitrified brick, because the surface is vitrified, so there are basically no capillaries, basically no stains, and no bleeding.

All-over tiles are also known as all-over tiles. The whole brick is fired from cuttings pressed under high pressure. After surface polishing, its hardness is comparable to that of stone.

The water absorption rate of the whole body brick is low and the wear resistance is good. The surface of the brick is not glazed, and the material and color of the front and back are the same, hence the name. Although there are still varieties such as seepage tiles, relatively speaking, their colors are not as good as glazed tiles. Most of the anti-slip bricks belong to open bricks.

The difference between the whole body and the whole body of the tile, fortunately it was chosen at that time, and the oil and dirt were wiped away.

How to choose floor tiles:

1. Take out a piece from the packaging box to see if the surface is smooth and intact; The glaze should be uniform and bright, without spots, lack of glaze and bumps; The edges should be regular.

2. Take out the two bricks and align them, the smaller the gap, the better. If it is a group of four pattern bricks, you should also check whether the pattern of the bricks is cohesive and clear. Then take out all the bricks in a box, flatten, and look at the overall effect from a little distance, regardless of white, other colors or patterns, the color should be consistent.

3. Stand these bricks one by one, check whether the size of the bricks is consistent, the deviation of small bricks is allowed to be within plus or minus 1 mm, and large bricks are allowed to be within plus or minus 2 mm.

4. Take a brick to knock another piece, or use other hard objects to knock the brick, if the sound of the brick is crisp and loud, it means that the brick is cooked and burned; If the sound is abnormal, it means that the sintering in the brick is not good and there is an internal crack.

5. Look at the appearance. The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners.

6. Listen to the sound. Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand.

7. Drip test. You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

8. Ruler. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

Full-body tiles and non-full-body tiles differ in color, permeability, and proximity to stone.

1.From the color point of view, the glaze of the whole body tile is consistent with the tread color, and the surface is smooth and detailed, while there will be a certain difference in color between the glaze and the tread of the whole body tile.

2.From the point of view of permeability, the color, texture and function of the whole body tile are closer to the texture of the tile surface, and the overall sense of transparency is stronger, while the texture of the non-body tile is more rigid and unnatural.

3.In terms of proximity to stone, the proximity of the whole body tile is relatively higher, and at the same time, due to the increase in coloring technology, compared with the appearance of natural stone, the similarity can reach more than 90%.

Full-body tiles and mutilated tiles are different in color, permeability, and proximity to stone. In terms of color, the glaze and tread of the whole tile are the same, and the surface is smooth and detailed, while the glaze and tread of the mutilated tile are of different colors. From the point of view of permeability, the color, texture and function of the overall tile are closer to the texture of the tile surface, and the overall transparency is stronger, while the texture of the non-overall tile is stiff and unnatural.

In terms of tightness with stone, the tightness of the all-body brick is higher. At the same time, due to the addition of coloring technology, the similarity can reach more than 90% compared with the appearance of natural stone. The color of the mold and the incomplete tile are different in color, permeability, and proximity to the stone.

<> all-body tiles are also called all-body tiles. This kind of tile is made of rock chips that are pressed under high pressure, and its hardness is very high, comparable to that of stone. The water absorption of the whole body tile is relatively poor, but its wear resistance is very high, this kind of tile is not glazed, so its front and back are the same, so it is called the whole body.

Full-body tiles can be used for the interior and exterior walls of buildings, laying the ground can be, the scope of application is very wide, and its surface is rough, and the light will not be very dazzling after reflection, so it will not cause light pollution.

1. The whole body brick (also called vitrified brick, polished brick, etc. in the market) is made of rock chips through high-pressure pressing, and the hardness of the surface polishing can be compared with that of stone, with lower water absorption and good wear resistance.

2. The surface of the whole brick is not glazed, and the material and color of the front and back are the same, hence the name. Although there are still varieties such as seepage bricks, relatively speaking, their colors are not as good as glazed bricks. Most of the anti-slip bricks belong to the whole body brick.

3. The whole body brick is also known as wear-resistant brick, and the material and color on both sides of the brick body are the same.

4. It is formed by firing cuttings by pressing them. After polishing the surface, its hardness can be compared with that of stone.

5. It has the advantages of low water absorption, wear-resistant, anti-slip and affordable.

6. The meaning of the whole body of ceramic tiles is that the upper and lower ones are of one material, also called homogeneous bricks, homogeneous bricks, which means the same material, and there are also whole-body bricks, homogeneous bricks are ground into powder with stones, and then fired at high temperature and high pressure, the fineness of the powder is related to the quality of the bricks, the density of pressing and the temperature of firing, and also affects the quality of the bricks.