Is there any good way to close the door of the closet?

Have you ever opened the cabinet to get something, and when you closed the door, you were startled by a "bang"? If you don't want doors, cabinet doors, and drawers to make a noisy "bang" sound when using and closing, you can actually make good use of some small parts.

In the case of cabinet doors, buffer hinges can be used.

to slow down the impact when the cabinet door closes. At present, there are two kinds of imported and domestic products on the market, and there is a lot of price difference, so some designers will use domestic hinges and buffers.

Two parts replace an imported buffer hinge, the price is close to the people, and the effect is not bad. In addition, you can also use ** self-locking device to open and close by press.

The drawer part also has a buffer slide rail, which is a three-section "steel ball slide rail", which can be installed with a side plate type or a hidden bottom plate, and the function is to make the drawer automatically retract as long as it is touched when it is closed, which is convenient and not easy to produce noise. To pay more attention, you can also choose to press to open the slide rail with cushioning, which has the function of opening the drawer by pressing lightly, which is very suitable for housewives who are too busy to open the drawer by hand.

The lift-up cabinet door also has cushion parts, which are called "hydraulic struts".

As for the room door, it depends on the habits of the home, if the home is installed with a hidden door, such as the master bedroom, study or toilet secret door, etc., it is recommended to use the automatic return door hinge, so that the door can be closed slowly and automatically without noise.

<> as long as you try the cushion hinge, you will no longer use the normal hinge, and there are also parts with cushioning that can be opened by pressing lightly, which is ideal for use in kitchens and dining rooms.

In fact, the buffer hinge is not cheap, if the door panel of the whole family is installed, it costs a lot, so there is a practice of installing a buffer under the hinge.

**The setting of the self-locking device is actually due to the design of the seamless dark door cabinet, and the door panel is opened by pressing, which is indeed more convenient than the general opening and closing, and is not easy to produce noise, which is a method worth trying. **The self-locking device is divided into snap type and magnetic type, and the magnetic effect will be better than that of snap type.

If you have installed a general slide rail and want to change it to a cushion slide, you can replace it as long as the thickness of one side of the slide is 13 mm and the length is 30, 35, 40, 45, 50, 55, 60 cm.

Hinges for different cabinet doors.

<> hinges are divided into half cover (middle bend, small arm, half buckle), full cover (straight bend, straight arm, full buckle) and no cover (big bend, built-in), mainly look at the shielding relationship between the door panel and the side panel, due to the short force and the force is different, the form of the hinge is not the same.

Choosing a half-lid hinge usually exposes the side panels of the cabinet by centimeters (about half of the side panels), while the full-lid hinge almost covers the side panels of the cabinet. The lidless hinge is the door slightly recessed into the side panels. Nowadays, the most popular hidden cabinets integrated with the wall are full cover hinges, while the rest of the cases are still mostly half-lid hinges.

Look at whether your door is a sliding door or a swing door. If it is a sliding door, there may be a problem with the track, such as a little dirty or a little deformed, just change the set. There is a high probability that the hinge is faulty, and the hinge is changed.

If the door of the closet is always ringing, there is a problem with the hinge, so put pencil powder in the hinge, grind the lead core into powder and apply it to the shaft of the hinge, and pour all the rest into the hinge slot, so that there will be no creaking sound.

It is faster to figure out where the sound is in **, and then find a carpentry master to deal with it.

1. The sound is caused by friction, and reducing friction is the best way. Lubricate the hinges on the doors, and after a day or so, we won't have a squeak when we open or close the door.

2. Cut off some candles and smear them into the hinge, which will be effective immediately, and there will be no squeak.

3. Put pencil powder into the hinge, cut out the lead core of the pencil, grind the lead core into powder and apply it to the shaft of the hinge and pour it into the groove of the hinge, which will take effect immediately, and there will be no more squeaks.

4. If the hinge on the door is very rusty, you can consider replacing the hinge with a new one, pay attention to the replacement not only to replace the hinge, but also to replace the position of the installation hinge, so as to prevent the hinge from falling off and causing the door to hurt people.

The door of the house keeps creaking when it opens and closes, and that's because the door shaft is ringing.

The solution is very simple: drop some engine oil or cooking oil on the hinge of the door shaft, drop a few hinges on a few hinges, and open and close the door several times after the drop to eliminate the sound of the door.

There are many people who may have such a problem, their bedroom wooden wardrobe will ring at night when it is not used or pushed, pulled, moved, what is going on? In fact, don't be too nervous about this situation, don't imagine the usual movie plot, you will answer your questions below. Why does the wooden wardrobe ring?

Clause. 1. Pests: borers.

In addition, it is normal for furniture to swell with the seasons and humidity. This is especially evident in the freshly made furniture that has just left the factory. Clause.

Second, if the furniture is new or old, if it is disassembled and repaired, there is also a process of re-adapting to the environment, and it will also produce noise. Clause.

3. It is normal for furniture to be transported from place A to place B, even if it is in the same city, due to changes in the surrounding environment. Clause.

Fourth, the furniture from the south is transported to the north or the furniture from the north is shipped to the south, and there is a process of adaptation and noise. Generally, the ringing does not last too long, 2-3 months or half a year, but especially rosewood.

The sorrel tree may last a little longer, as long as there is no explosion or mortise and tenon on the large side or other parts.

Cracking, all are normal. Veneered furniture, wood-based panel furniture, cork furniture or steel-plastic furniture, marble furniture will not make a sound.

How to solve the problem that the wooden wardrobe will ring? Double-check to see if it's a hinge.

The sound of friction is made, and if so, you can apply sewing oil or oil to the gap between the hinges. After oiling without sound, it is best to use toilet paper.

Wipe the oil off the outside of the hinge to avoid getting it on your clothes. If it is the sound of the wardrobe door rubbing against the frame, you can open the wardrobe door ajar, insert sandpaper in the gap between the door and the frame, rub it gently, and test whether it makes a sound while rubbing. With an Allen wrench.

After loosening the hinge screw with an ordinary wrench, close and adjust the wardrobe hinge door back and forth until there is no squeaky sound, and tighten the screws. If there is still a sound when you open and close the wardrobe hinge door again after closing the hinge, you can use a crowbar.

Lift the door leaf up. Isn't it easy? Shudada reminds you that it is best to work together with two people, after all, the weight of the cabinet is not light, and when repairing the hinge, be careful not to clip it.

There is a way to eliminate it. At this time, apply some lube to the hinge. This effectively eliminates these sounds.

You can replace the hinges with new ones, or they may be old and loose, so you need to drip some oil or pencil lead on them, and then tighten the screws.

1.Loosen the hinge screws with a hex wrench and a regular wrench.

2.After the hinge is released, close and adjust the wardrobe hinge door back and forth until there is no squeak, and then tighten the screws.

3.If there is still an abnormal sound when opening and closing the wardrobe hinge door again after closing the hinge, you can use a crowbar to lift the door leaf up, and there is basically no problem. If the hinge door hinge is rusty and broken, it can also be replaced by this method, but when buying the hinge, you should also pay attention to the size of the old one.