How to renovate the old bathroom floor if you don t want to remove the tiles? What aspects need to b

How to renovate the old bathroom floor if you don't want to remove the tiles? Cleaning and renovation: the black edges can be cleaned with banana water; The floor tiles with little damage can be polished and waxed, but the surface of the floor tiles is found to be slippery, so it is not recommended to use; Grinding, polishing, refurbishment:

In view of the uneven damage of glazed bricks, they can be made uniform and new according to grinding and polishing, but the fancy cannot be saved; Replace part of the bricks, for only part of the damage is more serious, that is, the replaced floor tiles are broken, as far as possible to dismantle and replace the bricks with the same color, so it is recommended to leave a little floor tiles when sticking to the wall tiles for future repair.

What aspects need to be paid attention to when dismantling the bathroom? preparation for construction; Before the official start of brick knocking, it is necessary to make some preparations, including the setting of power consumption for engineering construction and the preparation of work equipment in advance. Prepare in advance, so that the subsequent process can be carried out in an orderly manner.

The electric drill is the main special tool for knocking bricks on the wall, which is different from the traditional hammer beating method, and the construction of the project with an impact drill saves time and effort. The drill of the electric drill can also be dismantled and replaced according to the idea. In the construction process of the brick knocking project, the herringbone ladder is used as a special tool for assistance, in addition to the effect of assisting in knocking on the wall tiles on the wall, it also has the effect of setting up a temporary power socket to prevent the electrical socket and cable from being covered or crushed by the falling floor tiles, resulting in accidents in the construction of the project.

Disassembly and assembly of special tools for bathing; The bath supplies are disassembled first, and then the ceiling is disassembled. According to the construction habits of the construction team, the bath supplies can be disassembled before all the walls are knocked on the bricks, and they can also be carried out crosswise with the bricks. When disassembling toiletries, it is important to communicate with the homeowner beforehand.

If the bath products must be kept and used, care should be taken not to destroy the bath products when disassembling and assembling. Not all bath supplies must be disassembled immediately, the disassembly and assembly of the toilet is left to be carried out, and during the construction period of the project, the toilet can be protected with materials such as woodworking boards to prevent explosives from smashing.

disassembly and assembly of bath floor tiles; After the bath products are disassembled, the wall and floor tiles can be disassembled and assembled. Demolition is generally knocked from the bottom of the wall to the top, from the edge of the floor tile to the inside, and the appropriate knocking range is selected according to the disassembly and assembly part. Knocking bricks is done by tapping gradually from the bottom of the wall, from the boundary of each floor tile.

If you knock on the upper floor tiles first, there are more floor tiles deposited on the road surface, which will block the lower floor tiles, which will not be conducive to disassembly and assembly. In the process of knocking on the floor tiles, if the floor tiles are not removed to prevent too much deposition of floor tiles, the progress of the project will be eased and even lead to accidents in the construction of the project.

You can use some detergents to clean and make the tiles look a little more shiny, so that they can be transformed. In this way, you need to pay attention to the temperature, but also pay attention to the water and electricity transformation, but also pay attention to the protection of the wall, and also pay attention to the fact that it cannot be demolished during the day.

You can choose to clean, refurbish, sand, renovate, replace local bricks, and pay attention to dry and wet separation. Bathroom dismantling needs to pay attention to waterproofing, pay attention to water pipes, pay attention to electrical wiring, etc.

Nowadays, buying a second-hand house is a very common thing, but there are also many owners who will choose to redecorate, and they will encounter various problems when redecorating. For example, when renovating a second-hand house, how to remove the bathroom tiles? The following will be introduced in detail by the love space decoration company:

1. Prepare in advance when removing tiles. For example, construction tools, checking the electrical safety status of the bathroom, and determining the type and specification of tiles.

2. Remove the sanitary ware in the bathroom to avoid damaging the sanitary ware when removing the tiles.

3. When dismantling the bricks, you should pay attention to the order of demolition, you can knock from the edge to the middle, grasp the strength, and the tiles will be removed smoothly.

4. When the bathroom is renovated, the owner needs to negotiate with the construction team to see whether the old waterproof layer should be removed.

Demolition is generally knocked from the bottom of the wall to the top, from the edge of the tile to the inside, and the brick is knocked from the bottom of the wall, from the edge of each tile. In addition, in the process of knocking bricks, the tiles on the ground should be cleaned from time to time to avoid excessive accumulation of tiles, slowing down the construction progress and causing construction accidents.

The old bathroom does not smash the floor tiles to renovate the methods: clean the tiles, polish and polish, paint.

1. Some owners of the original bathroom is paved with some old styles, the tiles do not look particularly good, and they want to renovate in the later stage.

2. When cleaning, the slip can be combined with decontamination paste, dipped in decontamination paste with a brush, cleaned a little bit, and then rinsed with clean water.

3. In addition, it can also be painted, for some old tiles, it will fade after a long time, and you can use special tile paint to recolor the tiles, so that you don't have to smash the tiles again.

However, pay attention to the color when painting, so that it does not penetrate the stove and balance into the gaps. Wait until the surface of the tile is dry, and then redo the seam. Choose a color that matches the color of the tile, which can also make the bathroom tile look new and bring a different feeling.

Tips for choosing tiles for the bathroom:

1. Because of the long-term water use in the bathroom, it is relatively humid, and we need to pay attention to choosing dirt-resistant tiles with waterproof performance when choosing tiles. To choose tiles with a lower water absorption, the density is slightly higher, so glazed tiles can be chosen.

2. At the same time, it is also necessary to pay attention to the choice of anti-slip performance, which is very important for the elderly and children, so you can choose a matte anti-slip brick, which has a relatively high safety factor.

In the renovation of old houses, the renovation of the bathroom is a more problematic part, as the place is usually covered with a lot of tiles. Bathroom tile replacementWe must first remove the original tiles. So, how do you remove tiles from the bathroom?

Before the bathroom officially breaks the bricks, we have to do some preparatory work, including preparing and building electrical construction tools. "Knife sharpening is not stove and lack of wood". Preparing ahead of time can lay the groundwork for the process later.

In the process of toilet renovation, in order to avoid accidental short circuit and electric shock accidents. Temporary energy needs to be converted from the living room to the bathroom. The impact of drilling is an important tool for breaking down walls.

It differs from the traditional steel hammer and hammering method. Construction can be carried out quickly and easily with a percussion drill.

Toilet demolition such as sinks, mirrors, hooks, water heaters, and finally the roof removal. The usual construction equipment structure, which makes it possible to evenly remove bathroom fittings before hitting any brick or brick wall.

Not all hygiene products need to be removed immediately, and restrooms are left unarmed after hitting the bricks. In order to avoid falling into the tile knocking, drainage or dirt damage caused by falling into the drain. However, if you need to keep the toilet, you can use wood or solid materials from a prefabricated structure and place it in the toilet bowl to prevent the tiles from falling.

After removing the bath width room accessories, the wall tiles can be removed. The removal of the base wall is usually a tap from the top to the tap to the inner edge of the tile, and the appropriate tap strength is also selected depending on the extraction location. Knock on the bricks from the bottom of the wall and start taking advantage of the edges of each tile.

If it conforms to the previous tile, the tile accumulates more, the tile wall block, which is not conducive to removal. In addition, it is necessary to clean the tiles on the floor during this process to avoid excessive accumulation of tiles, slowing down the construction progress, and leading to construction accidents.

Since the bathroom of the old house was waterproof before, it was necessary to pay attention to the treatment of the impermeable layer when hitting the bricks. The old waterproofing layer is usually not removed. After breaking the bricks, the original waterproofing layer is thinner. A waterproofing layer needs to be made to improve the waterproofing capacity of the bathroom.

When tapping on the tiles near the socket and faucet, tap gently and carefully observe the direction of the cables and water pipes to avoid damaging the cables and water pipes. If the cable or water pipe is damaged, repair it in time to avoid further work.

The cleanliness of the construction site is very important. As soon as the construction is completed, the work will be cleaned up immediately, which will facilitate the next phase of construction. Cleaning can be done according to the construction conditions or properly during the construction process.

Once the construction is complete, the scattered tiles and cement on the site must be cleaned up, the garbage is packaged in bags and taken to the garbage station for disposal. It cannot be placed on the construction site, which hinders the progress of construction.

The above are the steps to replace the bathroom tiles. It can be said that the replacement of bathroom tiles is not complicated, and Yin Qiaotong only needs to use four simple steps.

You can get it for free