-
In rural houses, the damp ground should be ventilated frequently, and the large furniture (such as wooden cabinets, screens, etc.) placed in the windproof place should be appropriately removed, so that the air in the living room can circulate to accelerate the evaporation of water. If the ground moisture return is more serious, it can be remedied by yourself. The ground is first dug out of a pit, then paved with asphalt, and then paved with a layer of cement; Or first lay a layer of linoleum or two layers of waste plastic film, and then lay a layer of cement prefabricated blocks or bricks.
Quicklime can remove moisture from the home, wrap the quicklime in a cloth or sack and place it everywhere in the room, so that the indoor air is always dry. Before painting, the surface layer is chiseled, cleaned, and two coats of waterproof paint are applied. After the original ground is treated with moisture, a new surface layer is made.
The return of moisture on the ground makes the living environment deteriorate, the articles are moldy and deteriorated, and affect human health. This phenomenon is more obvious in the concrete floor with serious sand and ash and the cement floor with powder and soil.
-
1. The first thing to do in the room is to open the window for ventilation and take away the moisture in the room through air circulation. However, be careful not to ventilate the room at noon, because the air humidity is higher at noon, and the ventilation will be more humid at this time. You can choose a drier time period, generally the air is drier in the afternoon, you can choose to open the window for ventilation in the afternoon to dry the room.
2. If there is an air conditioner in the room, you can turn on the air conditioner and suck the moisture out of the room through the air conditioner. When turning on the air conditioner for ventilation, it is best to open the door of the wardrobe, so that the moisture in the room can be fully removed, and it will be about the same for about half an hour.
3. In cloudy and rainy weather, the doors and windows of the room should be closed, and the humidity will be greater on cloudy and rainy days.
4. If the room is damp, you can also buy some quicklime and bamboo charcoal and other desiccants to absorb moisture, sprinkle quicklime and bamboo charcoal on the corners of the wall and relatively humid corners, and regularly clean and replace quicklime and bamboo charcoal can effectively remove the moisture in the room.
5. The room is too humid, in addition to using desiccant to dehumidify, you can also remove the moisture in the room through the dehumidifier, and the dehumidification effect is also very good.
-
To dry wipe with a soft rag, it is recommended to use a cloth that has been soaked and wrung out until it does not drip when it comes to stains that must be cleaned with water. After wiping the floor, you must not open the window in humid weather, otherwise the floor will become wetter, you can wipe it again with a dry cloth, and then use the air conditioner to dehumidify.
-
The troublesome way is to open the windows frequently for ventilation, and the troublesome way is to lay a layer of plastic film on the bottom surface and then lay the floor tiles.
-
The ground in the house is damp, and it can only be ventilated, if you have always been common sense, you still have to find a way to solve it.
-
The ground in the house is damp, if it is the first floor, this should be considered a common problem, and the best way is to give the ground another layer of moisture-proof treatment.
-
Go to the supermarket to buy some dehumidifier or dehumidifier box, and place it in all corners of the home and places with heavy moisture, which can effectively absorb water vapor, remember to replace it in time.
-
The treatment methods for the dampness of the ground in the room are: scientific ventilation, laying moisture-proof mats, adding salt to warm water, using quicklime shirt wheel holes, using dehumidifiers or air conditioners, etc.
1. Scientific ventilation.
According to the change of weather and the humidity of the air, choose the appropriate time to open the window for ventilation. If the humidity outside is higher than indoors, then opening the window will bring moisture from the outside world in, causing dampness indoors. Because the weather is relatively humid, so properly close the window, can solve the problem of ground moisture return, especially in the morning and evening these two periods, the humidity is more serious, in the afternoon Tong to do the weather is relatively dry, you can open the window to dry the ground, to achieve the effect of dehumidification.
2. Lay a moisture-proof mat.
You can lay a moisture-proof mat on the ground, which can block the moisture from the outside world and achieve the effect of heat preservation and moisture-proof. For places where the ground is more humid, you can also lay waste newspapers, which can not only absorb the moisture on the ground, but also rub the water on the shoes, which plays a role of killing two birds with one stone.
3. Add salt to warm water.
You can add salt with warm water, and after the salt is fully dissolved, you can mop the floor with salt water, wring it out as much as possible and then mopping, which can have the effect of preventing moisture.
4. Use quicklime.
Quicklime is a kind of desiccant, which can absorb moisture in the air, keep the indoor air empty or dry, and only need to put the quicklime under the bed or under the corner of the house, so that it can absorb the moisture in the air and play a moisture-proof role.
5. Use a dehumidifier or air conditioner.
Frequent use of a dehumidifier for dehumidification, or turning on the dehumidification mode of the air conditioner, can effectively reduce indoor humidity, keep indoor air fresh, solve the problem of ground moisture return, and reduce indoor moisture.
-
The damp floor of an old house can be caused by rising moisture under the ground and poor ventilation of the room, among other reasons. Here are some ways to deal with the problem of wet ground:
1.Ventilation: Keeping the air circulating in the room can effectively reduce the indoor humidity. If the windows in the room aren't big enough, consider installing vents in the doorway or windows.
2.Dehumidification: Dead sails can be dehumidified or some dehumidifiers can be placed indoors to absorb moisture. If economic conditions allow, a dehumidification system can be installed.
3.Enhance floor maintenance: Floors can be protected by cleaning them, fixing leaks or seepage on them, and more. If the floor has already been painted, you can consider retreating the floor, such as sanding off the old paint and repainting it.
4.Install a moisture barrier: If the moisture under the ground is serious, you can consider installing a moisture barrier under the room clump floor, which can effectively prevent the moisture from rising.
It is important to note that if the wet ground is a serious problem, more in-depth inspection and treatment may be required. It is recommended that you consult a professional home repair service company or home inspection agency for more detailed and professional advice.
-
The ground is damp and should be damp underground, you can brush the ground with waterproof paint, or redo the ground, and redo the ground when the ground is backfilled.
Not only is this basement not only not flexible and waterproof, but also the structure itself.
The room is damp, or the environment is a problem, plus the lighting is not good, it will be like this, Yaguang Ya experts give you a little advice: >>>More
Introduction: Many people will have such a situation in their homes, that is, the corners of the walls are very damp, which is also called the anti-moisture in the corners of the house, so what should I do when I encounter such a situation? Let's find out. >>>More
Floor moisture resistance refers to the appearance of water on the surface of the floor, which is often uncomfortable and can lead to floor damage and difficult cleaning. There are many reasons for the anti-dampness of the floor, and we can look at it from the following aspects. >>>More
Reprocess the ground using a screed.
In other words, if we plan to lay a wooden floor and the floor needs to be releveled, then we should not deal with it separately and use a new screed. The conventional method is to smear a layer of cement mortar on the ground, and the strength of the cement mortar is higher, that is to say, the cement content is larger. If the thickness is thicker, you can beat a layer of concrete, and then use a plate vibrator to level the ground. >>>More