The practice of ribbon bow, the way to play ribbon bow

Decide what kind of ribbon you want to use. It's helpful to choose based on the material and color. For example, if you want to decorate a piece of clothing, or if you want to add a bow to an outfit, the color or material of the ribbon should match the outfit.

2 Choose according to quality. Silk is the most basic ribbon material used to make bows, but it is easy to slip for novices, so the grosgrain material is more suitable. Calico, velvet, metallic fibers, cotton, tulle such as organza, and other types of ribbons are fine.

In addition, ribbons with thin wires on the edges are perfect for styling the final product, especially for decorating gifts and bouquets.

The most basic thing to do is that if you can tie a ribbon into a tight knot, you can tie it into a bow as well.

Some ribbons are stiff and difficult to tie into a bow without other measures, such as those with metal wires or tight edges.

3. Conduct experiments. It is recommended that you try to tie one of different ribbons first, including ribbons of different widths, to find the one you want.

Either way, keep in mind that you'll need a ribbon of considerable length to make a bow. In this process, it takes a certain length to fold, tie the knot, etc. Also, it is obvious that the bigger the bow, the longer the ribbon you need.

Materials that may be used.

Ribbon. Floral wire (thin wire, and only used where needed).

Scissors. glue (only where needed); Remember to check if it is suitable for use on fabrics.

If you're using glue, experiment with it in an inconspicuous place first and let it dry naturally. If the glue dries and comes out from the other side, you'll need to either adjust the bow to hide the part or choose a different glue.

To estimate whether a ribbon will be the right length to wrap around the box and make another bow, wrap the bow loosely around the box of the right size, and leave an extra 60 cm on either side of the bow to finalize the knot.

DIY Handmade Ribbon Bow Tutorial.

The ribbon bow is tied as follows:1. Cross the two prepared straps.

2. The strap on the top bypasses the strap below.

3. Fold the right strap into one side of the bow.

4. The strap on the left goes around the bow from below and folds into the other side of the bow.

5. After that, stuff it into the circle of your left hand.

6. Tighten both sides after stuffing.

7. Finally, a beautiful gift box bow is tied.

Notes:1. In the whole process, pay attention to the flatness of the ribbon and adjust the direction of the ribbon.

2. Press your thumb firmly and not too loosely.

Here's how to make a bow with a ribbon:

Material Preparation: Slow and Late.

Operation steps: 1. Cut a piece of ribbon. Always make sure that the length is sufficient, remember to leave an extra piece of ribbon each time to allow room for the bow to be shaped, and also allow enough length for the two tails of the bow.

2. Place the ribbon on a flat surface.

3. Swing the two ends of the ribbon, i.e., the tail of the bow, to the middle and intersect each other, and you have two tails and two circles. If the shape of the two circles is not obvious, just tidy it up.

4. If necessary, adjust the size as much as possible. That is to say, the two circles and the two tails are adjusted to the size and length you want, and then the two sides try to name which volume you want.

5. Stack the left circle on top of the right circle, go around from behind, and then pass through the hole formed in the middle. Tie tightly in the middle.

6. Tidy up both sides until the size of both sides is symmetrical.

Here's how to make a bow with a ribbon:

1. The first step is to put the ribbon on your left hand and jump up with your index finger and block it with your little finger. Wrap it around in an upward circle.

2. Wrap each other into a V-shape.

3. Looking at it from the side, it is the right hand to tidy up, and the left hand to do the support.

4. Pinch the cover tightly with your right hand, and then pass one end through the middle. The position of the back of the left hand is passed there.

5. Form a winding V-shaped shape.

6. Pinch one end firmly with the left hand, and use the right hand to pull the other end, continue to tie the strong butterfly buckle, and pay attention not to reverse the direction.

7. The buckle of a bow has been able to preliminarily shape the ribbon to burn, pay attention to the symmetry of the belts at both ends.

8. Also put the other end in place to form a symmetrical shape. Looks beautiful, doesn't it.

9. When it is finished, if you need to cut the tail into sharp corners, you can use scissors to trim it again, paying attention to the symmetry of both ends.

The meaning of the bow

1. The bow symbolizes sincere love, freedom and breaking through the shackles. The meaning of the bow is sincere love, freedom, breaking through the shackles and so on. Liang Zhu's love story has long been deeply rooted in the hearts of the people, so Liang Zhuzhong will use a pair of butterflies flying in pairs to express his praise for pure and beautiful love.

2. Butterflies fly freely among the flowers, symbolizing the enviable pastoral life. However, the process of a butterfly breaking out of its cocoon and becoming a butterfly is painful, and it can only become a fluttering butterfly. Only by bravely breaking through the shackles can we thrive in a difficult environment.

3. Butterfly symbolizes a kind of beauty, detachment, light life, butterfly is the prototype of the bow, the bow is the expression of the knot, the meaning of the knot, the picture must be intentional, the meaning must be auspicious, the meaning of making a bow by hand to give the future a hope, to a blessing to relatives.

Here's how to make a bow with a ribbon:

1. Step 1: Prepare a ribbon of moderate length. Step 2: Wrap the ribbon around your index and middle fingers and secure one end with your thumb.

2. Step 3: Wrap the ribbon around the middle finger from back to front. Step 4: Wrap around your index and middle fingers from back to front in the direction of the long ribbon.

3. Step 5: Wrap the back of the middle finger to the front, thread the long ribbon from the tiger's mouth, and wrap it around the front side. Step 6: Thread the ribbon in a horizontal wound and tie it into a knot.

<> bow is shaped like a bow knot, the production material is not the same, the shape and size are different, but the appearance is beautiful and generous, and there are many ways to play it, which embodies the ancient cultural beliefs and strong religious colors of our country, and embodies the good wishes of people to pursue truth, goodness and beauty.

The bow is a type of Chinese knot, and due to its age, its history runs through the history of mankind. The long cultural precipitation has made the Chinese knot permeated with the unique and pure cultural essence of the Chinese nation, rich in rich cultural heritage. "Rope" is homophonic with "god", and Chinese culture used to worship rope in its formative stage.

According to the text: "Nuwa led the rope in the mud and held it up as a person." "And because the rope resembles a snake and dragon with a twist, the Chinese are the descendants of the dragon, and the image of the dragon god was reflected in prehistoric times by the change of the knot.

The word "knot" is also a word that represents strength, harmony and emotion, whether it is a combination, friendship, fate, unity, results, or a husband and wife, forever knotted, "knot" gives people a sense of reunion, intimacy and warmth.

The ribbon bow is made as follows:

The middle finger of the index finger is raised, the thumb and ring finger pinch one end of the ribbon, and the other end of the ribbon (the longer end) is wrapped around the two fingers that are erected. Make a second turn. The long end of the ribbon comes out through the space under the two fingers that stand up.

Wrap from the back of your fingers to the front of your palm. Thread it through a bow loop below the middle finger.

Tie a knot with the shorter end of the ribbon to secure the center of the butterfly knot. Take the bow off your finger and arrange the shape. In the last step, use scissors to cut the ends of the ribbon to the same length and cut out the triangle shape for each.

Treat the edges of the ribbon with a lighter to avoid slippery lint edges. The ribbon bow is finished and can be adjusted according to the situation of production.

How to tie a single bow: cross the two straps of the guess base, tie a single knot, fold the straps on the right into an S shape, put the left straps under the straps on the right, pull the straps over the first hole, and the single bow is tied.

How to tie a double bow: two ribbons cross each other, long on the right and short on the left. Fold the right ribbon twice and fold it into the shape of a bow, and turn the right ribbon around the bow to flip the bow.

Thread the ribbon on the right through the hole below from left to right, tighten the double bow slightly, and tie it.