Can you put wallpaper on a slight uneven wall? Is it good to stick wallpaper?

You can still put wallpaper on uneven walls, but repair the walls before paving. Before plastering, the surface of the wall should be cleaned, including dust, loose objects, dirt, oil stains, etc. Secondly, there are obvious concave and convex parts on the surface of the masonry foundation, which should be used in advance with 1:

3 cement mortar.

Make level; Water should be poured on the wall before plastering, generally the brick wall foundation is watered twice, and the water seepage depth on the brick surface is about 8-10 mm, which can meet the requirements of plastering. Apply putty evenly to the wall.

material, forming a smooth and neat decorative effect, paste the wallpaper after completing the wall repair work.

Before laying the wallpaper, be sure to smooth the wall, otherwise it will lose its beauty, but it will also affect the wallpaper pasting effect. Therefore, it is recommended to brush the wall solid first, and then level the wall with putty, so that the wallpaper will not bulge. Before pasting the wallpaper, check whether the wallpaper is the same color, focusing on the color number and batch number.

Then check the opposite flower of the wallpaper to see in which direction it was built.

Prepare the glue. The quality of the glue will directly change the service life of the wallpaper, and the modulation degree of the glue will also affect the construction speed and the overall effect. The glue modulation concentration is moderate, and the standard is whether the chopsticks can stand in the glue.

Start pasting, cut the wallpaper according to the height of the wall, apply the glue evenly directly behind the wallpaper, and paste the wallpaper vertically from top to bottom. Then carefully scrape the wallpaper with a tool until the bubbles and wrinkles disappear. Prepare a dry towel and wipe off the remaining glue on the wallpaper while sticking it to prevent the wallpaper from being contaminated.

Paste the wallpaper in turn according to the above method.

The uneven wall surface can actually paste wallpaper, but there are requirements for wallpaper, it is recommended to choose imitation wall tile wallpaper, if you don't like it, it is recommended to use it when reworkingWhite cementRepair flat, it is recommended not to use putty that is prone to cracks。Dry wall: Dry wall is the premise of laying wallpaper, if the wall is wet, it is not only a waste of time, but also easy to cause damage to the wallpaper.

When testing the wall drying, the wall can be covered with film and sealed with tape. If there is no condensation on the membrane the next day, it indicates that the wall surface is completely dry. The wall has moderate water absorption:

The wall absorbs too well or too poorly.

Even if the wall is uneven, you can paste wallpaper, and you can cleverly paste some more delicate patterns to cover the unevenness. Personally, it is very recommended to put up wallpapers.

The wall is slightly uneven and cannot be pasted with wallpaper, and the wallpaper should be pasted after the wall is smoothed; If you paste wallpaper, it will affect the aesthetics and the effect of wallpaper, so you must first smooth the wall.

A slight unevenness of the wall can be pasted with wallpaper, which is very good and can make the home go up a notch.

What happens if the wall is uneven and wallpaperedMany people may encounter such problems when renovating their homes. For example, there will be a lot of them when you place wallpapers.

creases, because the walls are uneven. The wall must be clean and tidy before wallpapering. Clean dust, dirt, dust and grease and clean the walls.

The putty wall decoration process flows through multiple processes, and the materials used are also evenly applied to the wall, and the putty material is used to form a delicate and neat decorative effect.

What happens if the wall is uneven and wallpaperedFirst of all, the wall is not flat, you can take the limb belt to deal with the wall first, and then paste to deal with the flat wall, it is recommended to use white cement patch level, and putty is not recommended for cracks.

What happens if the wall is uneven and wallpaperedDry the wall first, if the wall is wet, it will not only waste time, but also damage the wallpaper. If the condensation on the wall tiles is not detected the next day, it can be sealed with film tape. Absorb water in the middle of the wall, the wall absorbs too poorly, absorbs water not suitable for easy wallpaper is not easy to build.

Of course, the hygroscopicity of the wall is important, and the absorbency of the wallpaper is equally important. The wall bearing capacity, which is built on the other side of the wallpaper represents a wall, we will press for the obvious indentation, if it does not cross the boundary, it may be that the wallpaper you placed should be reconfigured.

What happens if the wall is uneven and wallpaperedHow to deal with bumpy wall decorations, clean walls. If the wall is uneven when decorating, it must be repaired before the associated wall decoration is carried out. The first step in flattening a wall is to clean it.

The peeling and cracking sites must be cleaned with cement mortar to make the decorative surface smooth and clean. Putty also needs to be soft, usually according to the conventional method using a steel scraper or scraper for scraping, the number of scrapings can not be too much, usually applied twice. To polish the walls, use the sandpaper tool to polish the walls directly.

Once the grinding process is complete, the entire wall can be leveled and then decorated with wallpaper.

What happens if the wall is uneven and wallpaperedHow to detect uneven walls, to detect whether the wall is flat, you can use a ruler to make relevant measurements. The ruler is a special tool used to detect the flatness of the wall. The inside of the ruler should be placed on the wall to be inspected during the inspection, and the direction of the ruler should be noted when approaching the wall.

Then observe the size of the gap between the ruler and the wall. In special cases, measurements are taken inside the cracks to ensure that all walls meet the requirements.

You can get it for free

When decorating the wall, I feel that it is too simple to paint the wall, so I will choose to paste wallpaper on the wall, in fact, it is not a simple thing to paste wallpaper, first of all, we must pay attention to the wall environment, so if it isCan you stick to the wall if the wall is uneven?1. Can the uneven wall be pasted on the wall?

Can you stick to the wall if the wall is uneven?The uneven wall can be pasted on the wall, the wall can be pasted with uneven things, that is, the wallpaper posted is a little irregular, the wall is still flat in a large area, the wall is polished when decorating, and the master who often decorates knows that if the wall has been renovated, you can place some trees and flowers on the wall, observe that the edge of the map is curved, and it is easier to show the irregularity of the wall.

Second, what are the precautions for wallpaper on the wall.

1. Precautions for wallpaper on the wall, before construction, you need to carefully check whether the color number and batch number of the wallpaper we want to use are consistent, and you need to see what color the wallpaper belongs to. The bad glue will directly affect the overall effect and service life of the wallpaper paste, so we need to buy authentic brand glue or wall powder when buying materials. Wallpaper dry pasting is a construction method that evenly coats the back of the wallpaper with glue, mainly for the glue wallpaper.

Cross cloth and non-woven bottom wallpaper is not required to be glued. We can use a chopstick to judge whether a chopstick can stand in the glue.

2. Precautions for wallpaper pasting on the wall, if you choose pure paper wallpaper, pay attention to the construction, do not scrape and wipe the glue on the paper surface, in order to prevent the surface of the wallpaper from being polluted. Sporadic wallpaper can be left not to throw away, so that we can repair and use it in the future, after pasting the wallpaper, pay attention to close the doors and windows, do not open the window within 24, let the wallpaper dry slowly. When you need to hang oil paintings or other ornaments on the wall, you can draw a "V" shape on the wallpaper nailed with nails in advance to facilitate later repairs.

After the paper is pasted, the doors and windows need to be closed for 2-3 days, the purpose is to allow the wallpaper to dry naturally. Be careful not to turn on the heater and other air-conditioning equipment to prevent the wallpaper from shrinking violently and causing cracks. In the humid spring season, only choose to open doors and windows during the day to prevent damp gases from entering the room.

3. Precautions for wallpaper on the wall, there is a certain scrubbing resistance to the paper, so if the surface is stained, we can gently wipe it with soap or other cleaning agents. For some wallpaper with embossed patterns, you can use a vacuum cleaner to clean it every 2-3 months. Usually we just need to clean it with a chicken feather sheet.

Be careful not to hit or rub the wall with hard objects such as the back of the chair and the edge of the table in daily life to prevent the wall from being damaged. If you find that the surface of the wall is damaged in a small part, you can choose to remedy it with pigments or paints that are closer to the color. In this way, the wallpaper decoration of the living room, after living for a few years, can also maintain a beautiful and clean state.

Modern home decoration wallpaper has gradually replaced latex paint, and wallpaper is not only beautiful but also more environmentally friendly. But the question is, what wall can be wallpapered? How to call for wallpaper if the wall is uneven? This is something that many people don't understand, so I'll talk about it in detail.

1. What wall can be wallpapered?

(1) The wall is dryDry walls are a prerequisite for wallpapering, and if the walls are wet, it will not only waste time but also cause damage to the wallpaper. Many guys here will ask how to check whether the wall is dry.

You can put a piece of film on the wall and seal it with tape, if there is no condensation on the film the next day, it means that the wall is completely dry.

(2) The water absorption of the wall is moderateThe wall is not suitable for wallpaper if the water absorption is too good or too poor, and the wallpaper with good water absorption is easy to crack and the water absorption is not good, and it is not easy to construct. Detecting water absorption is as simple as sprinkling water on the wall, if the water is absorbed quickly or becomes a droplet.

Of course, the water absorption of the wall is important, and the water absorption of the wallpaper is equally important. (Attached: The purchase of wallpaper needs to look at the absorbency of the wall, which is not breathable and easy to mildew).

(3) Strong bearing capacity of the wallIn the construction of wallpaper, you may wish to do a pressure test, press the wall with your thumbnail to see if there is any obvious indentation, if there is no indication of strength, you can post wallpaper; Otherwise, it means that the wall needs to be reorganized.

2. How to paste wallpaper on uneven walls

The uneven wall can actually be pasted with wallpaper, but there are requirements for wallpaper, it is recommended that you choose the wallpaper that imitates the wall tiles, if you don't like it, it is recommended that you use white cement to repair the flat when reworking, and it is recommended not to use putty to easily produce cracks.

Although the wallpaper is environmentally friendly and has a good decorative effect, I hope that you will do the above tests before decoration to decorate a satisfactory home and avoid affecting your home life in the future due to improper decoration.

You can get it for free

Wallpaper has the advantages of various styles and simple construction, so many people will choose wallpaper to decorate the wall. When wallpaper is pasted, there are usually relevant requirements for the wall. So if the wall is uneven, can you paste wallpaper?

Next, I will briefly introduce it to you.

1. Under normal circumstances, it is not possible to paste wallpaper on uneven walls, because direct wallpaper on uneven walls will not only affect the pasting effect of wallpaper; Moreover, if the wallpaper is directly pasted in this way, it is easy to have bubbles, because the wallpaper is bulging and collapsing, and it is also easy to have the problem of warping the wallpaper; Sticking wallpaper directly on the uneven wall will also affect the service life of the wallpaper.

2. When you paste the wallpaper, if the wall is uneven, you can use putty to level the wall first; Then we can brush the wall solid or wallpaper base film, because the wall solid can improve the adhesion of the base layer, and it is not easy to produce bulging when pasting wallpaper; The wall is solid and dry, and the wallpaper can be pasted. After we cut the wallpaper, brush the glue on the back of the wallpaper, and then fold the glue in the coating group and let it stand for about 5-10 minutes before pasting.

3. The pasting of wallpaper is usually from the top to the bottom of the door, and the wallpaper needs to be scraped flat with a scraper to make the wallpaper close to the wall. After the wallpaper is pasted, you can use a sponge to wipe off the remaining glue; Don't throw away the scattered wallpaper, as we will need it when we repair the wallpaper in the future. After pasting the wallpaper in the room, we need to close the doors and windows for 24 hours to let the wallpaper dry.

4. Wallpaper is an environmentally friendly decoration material, but the glue pasting wallpaper will contain formaldehyde and other substances. When choosing wallpaper glue, you can choose relatively environmentally friendly glue products such as glutinous rice glue. The quality of the glue usually affects the service life of the wallpaper and the pasting effect, so you need to choose a regular product.

Before pasting the wallpaper, you need to deal with the base layer of the wall, and make sure that the wall is smooth, dry and tidy, and then paste the wallpaper.

The method of decorating the uneven wall treatment, the uneven wall can be pasted with wallpaper. Method: First of all, if the wall is not leveled, not only will it feel uncomfortable visually, but also the overall beautiful practical effect will be reduced after the furniture is placed.

Therefore, in the case of interior decoration, we must do a good job of supervision to prevent this kind of problem. Therefore, if the wall is not leveled, please do it as soon as possible before painting.

If it is hired under the premise that the construction party of the construction project is found, once you find this kind of problem, you can refuse the acceptance of the project, stipulate that they are renovated again, and ensure that the repair is carried out, and there can be no crack in the future; You still need regulation, but before regulation, we should have some expertise in these areas. At first, most of the front side is still flat, and only some are not flat; Second, the vast majority of unevenness is less than 1cm; Third, there is a certain deviation in the flatness of the wall, which is higher than 1cm.

Part of the unevenness, in that case is more suitable to solve, generally immediately wipe under the premise of the original putty powder, and then level with sandpaper, and then compare the whole wall, to make sure that it can be painted after the plan. When inspecting the wall, it is found that there is a certain deviation in the front plan, the deviation is within 1cm, if the wall base can, you can immediately wipe 1 2cm of putty powder in front of it, and then flatten; If the wall foundation is not very good, be sure to shovel the original wall shovel and replace it with mixed mortar and plaster, and then brush the putty with sandpaper.

If there is a large deviation of more than 1 cm in the flatness of the front, check how the front base is carried out, and if necessary, shovel under the wall, and then smooth the plastic and plaster. If the deviation is large, you need to apply plasterboard on paper, then put putty powder on the drywall, polish and polish the printed paper, and then apply paint. If it is part of the unevenness, you can directly brush the latex paint again directly on the original putty layer, check the leveling of the wall, if the scale is not neat, but the wall does not have any problems, just brush the wall with 1 2 cm thick putty powder, and then the ground is leveled; Not good, if you want to paste wallpaper, you need to level the wall decoration first, otherwise you will lose the artistic beauty, and at the same time, it will continue to harm the actual effect of wallpaper pasting.