Is it better to bulge or recess a black titanium ceiling? What s the difference?

At present, it is very fashionable to have a light luxury style, due to the improvement of everyone's regulations on the decoration ceilingIf you use paper gypsum board to make the ceiling, the interior decoration of the ceiling looks a little simple, the decoration ceiling is gradually fashionable to use stainless steel plate to go around, widely like to use black titanium stainless steel, the texture is clear. When home decoration, black titanium is often used in the decoration of the top of the ceiling.

stainless steel, ceilings based on black titanium with plasterboard.

The combination of fashionable styles.

It's a sight to behold. The black titanium is installed in two ways, which are recessed and convex, each of which has different characteristics of light luxury, and each area has an understanding of life. The design technique of black titanium recessed is more applied in the decoration of the top of the ceiling, because the sense of line and hierarchy is more obvious, and the decoration ceiling is coupled with black titanium stainless steel, the texture is immediately revealed, especially the sense of luxury, and the overall home decoration effect is improved in an instant.

The edges of the ceiling decoration are made of black titanium stainless steel, as if given to all suspended ceilings.

Tie a beautiful ribbon, the whole living room is simple and fashionable, unique, particularly high-end, and cost-effective. Remove the designer's unique scheme design in addition to the vast majority of the situation under the hanging part of the application is mostly concave as the leading, will look the overall actual effect of simple, neat, but the appearance of the concave demand for the operation is higher, more use of double-layer gypsum board veneer or bottom plate method to complete the actual effect of concave.

In part of the massive suspended flat ceiling thus highlights the titanium bars.

Occupy the majority, which can highlight the actual effect of metal lines to tone the rigid sloping roof, and raise the construction of the wire frame.

It is relatively simple and easy to operate, and the convex and concave of the black titanium decoration ceiling are all more commonly used methods, which match the different design styles, so there is no way to do the comparison. If the floor height of the home reaches more than 3 meters, then when the black carbon decoration ceiling is madeIt is recommended to choose a convex, so that the matching design style should be European and American style.

It should be better to protrude, because this is more beautiful and different, it should be that the effect presented is different, and the suitable style is different.

It is better to recess; The meaning is different, the essence is different, the decoration method is different, the performance is different, the effect is different, relatively speaking, I personally think that the black titanium ceiling is better than the recess, because it is more three-dimensional.

The black titanium ceiling protrudes well; The three-dimensional sense of space is different, the sense of hierarchy is different, the comfort is different, the practicality is different, the light sensitivity is different, and the protrusion will be more beautiful, and it is easy to take care of.

The black titanium bar of the living room ceiling is flat or concave The interior decoration ceiling adds black titanium lines, whether it is concave (inlay) or convex, it is not as good as the plane. If the concave convex surface is compared, the individual will prefer the black titanium concave surface, and the effect is more integral. Today's indoor ceilings are not only limited to gypsum board, but also add some other decorative materials to the gypsum board to add color to the ceiling.

Therefore, some lightweight materials such as titanium can make the ceiling more fashionable by making some lines on the gypsum board. There are generally three types of black titanium lines on the ceiling, flat, concave and convex. These three lines are carried on the top, visually and as a whole, the flat black titanium effect is the best, followed by the concave surface, and then the convex surface.

Ordinary ceilings will naturally look a little monotonous, but if you add the following 4 types of decorative lines, the sense of space will immediately become more advanced and atmospheric, who wouldn't like it?

1. Black titanium lines.

2. Black line light.

If the black titanium line can only be used for decoration, then the black line light will combine decoration and practicality, when the light is turned on, it is a line light, and when the light is not turned on, it has a good decoration like the black titanium line from the surface.

The black line lamp has a lighting function, and the service life is about 8 years, usually open without heat and radiation, the light will not be very dazzling, very suitable for some of the current design styles without main lights.

3. Black mirror glass.

Compared with stainless steel lines, stainless steel lines are used for trunking less than 2cm, and black mirror lines are suitable for large areas.

4. Black latex paint.

This kind of line construction is simple, the cost is relatively low, but compared with other lines less three-dimensional, pay attention to the painting, both sides of the trunking need to be protected, otherwise it is not good to stain the ceiling.

Usually, the width of the black line of the ceiling can be controlled within 20cm, and it can be adjusted appropriately according to the size of the living room.

Small apartment is generally suitable for simple ceilings, if your house is large, you can try to add a black line to the living room ceiling, immediately more layered, the color can also be selected according to the style of the home, choose the right ceiling at home can also become very eye-catching!

Is it better to bulge or recess a black titanium ceiling? Why?

Hello dear, I'm glad to answer for you, recessed good. The black titanium recessed design technique is used to disturb the ceiling position, because this sense of line and three-dimensional sense is stronger. The ceiling is matched with black titanium stainless steel, and the sense of hierarchy is immediately revealed, which is very textured, and instantly improves the overall decoration effect.

Decorating the edges of the ceiling with black titanium stainless steel is like tying a bright ribbon to the entire ceiling. The whole living room is simple and fashionable, beautiful and generous, very textured, and cost-effective. If the kiss protrudes out, it will appear that the room is high, and it is not beautiful, and it will have a depressing feeling.

Titanium bars are now very popular for ceiling decoration, titanium bars are tough, corrosion-resistant, silvery, will not turn black, and are the only metal that has no effect on human autonomic nerves. So, is black titanium inlaid or convex better? How to make pure lead for black titanium embedded ceilings?

Here we will bring you the detailed steps of the black titanium embedded ceiling practice.

Is black titanium inlaid or convex better?

The effect of embedding is good, it is necessary to double gypsum board.

What is the practice of black titanium embedded ceiling?

1. If you want to embed black titanium into the ceiling, you need to leave a groove on the top surface when installing the ceiling, and the size of the groove should be consistent with the size of the black titanium metal bar. Next, use glue to paste the black titanium on the macro top groove of the hanging silver pants, and after sticking it, it needs to be fixed with force and pressure for a period of time, and then remove the auxiliary device after the glue is solidified.

2. Or when we install the ceiling, the carpenter can outline the shape with wooden strips, and then fix the wooden strips on the top surface with settings; Next, install the ceiling, after the ceiling is installed, there will be a wooden buckle metal strip. We stuck the black titanium metal strip on the wooden strip line, and it was best for everyone to jam it with a small nail cap.

Detailed steps of black titanium embedded ceiling practice

First of all, the groove is reserved on the top surface of the ceiling, and the size of the groove is required to be consistent with the black titanium bar; Secondly, the back of the black titanium is coated with glue and pasted into the groove, and the auxiliary device is pressed for a period of time to ensure that the glue is solidified; Finally, paint the ceiling, but use masking paper to cover the surface of the black titanium bar to avoid the black titanium bar being polluted by the paint.

The above is about whether black titanium is embedded or convex, and the detailed steps of black titanium embedded ceiling practice. The black titanium method should determine the size in advance, do a good job of design and modeling, and then reserve a groove to install titanium bars. I don't know how to design a titanium bar ceiling, pay attention here, and get the renderings of the titanium ceiling.