Introduction to how to repair floor tiles in the daily maintenance of ceramic tiles

What are the methods of repairing floor tiles.

The floor tiles are falling off. After the floor tiles have been used for a long time, it is inevitable that there will be various problems, and the falling off of the floor tiles is one of the common problems, which is mostly caused by improper construction or aging of the floor tiles. Because the situation of floor tiles falling off is different in each house, the relative solutions are also different.

If the mortar is not loosened, but the tile falls off, you can first scrape the mortar adhered to the back of the tile and around it, and then mix a little cement with 107 glue to stir it into a paste, evenly coat a thin layer on the back of the tile, and then press the tile to stick firmly; If the floor tile mortar has peeled off, it is necessary to gently chisel some pits on the original base surface, and then mix the mortar with 107 glue to re-inlay, brush a layer on the foundation surface and press the falling tiles until the mortar hardens.

Crack repair. If there are cracks in the floor tiles in your home, how should you fix them? It is recommended that you can use tile paste to repair the cracks of the floor tiles, which is because it can produce a smooth visual effect consistent with the surface of the floor tiles, and there are a variety of colors to choose from, hard and wear-resistant, so you can also use it to repair obvious cracks and play a role in covering up.

Hard objects are damaged and repaired with toner.

People will inevitably bump into the floor tiles in their daily life, resulting in damage or scratches on the floor tiles. If you don't want to replace the original floor tiles, you can use marble glue reinforcing agent, adjust the color to a similar color with toner, fill in the vacancy on the porcelain surface, and polish it after hardening, but this practice may cause different degrees of color difference.

Cracks in floor tiles are recommended to be chiseled and pasted separately.

If the floor tiles in your home have been badly damaged, it is difficult to restore them to their original state with simple repairs, so you need to replace the whole brick. It is worth noting that everyone should be careful when chiseling bricks, it is recommended to hire professional workers, and then glue the same brick, so that the effect is best.

If the floor tiles of the house are cracked, it will affect the beauty of the house and it will not be convenient to live. Especially in newly renovated houses, scratches on the floor tiles can be particularly noticeable. So,How to repair the floor tiles

What are some tips for floor tile repair?

How to repair the floor tiles——Repair of paint cracks in the surface layer.

If the paint surface of the floor is cracked, if it is severe, the paint film will peel off. This is usually because the floor is exposed to sunlight, causing the floor to dry out and shrink, causing the paint film to crack. If the problem is relatively minor, we can apply paint and wax appropriately, and if it is severe, it can only be smoothed and painted.

The method is very simple: first sandwork the damaged area with sandpaper, then remove the dirt, clean it with a soft, dry cloth and cover it again.

How to repair the floor tiles- Repair cracks in the ground.

For cracked floors, we can use mixtures to fill the cracks in the floor; If the cracking is severe, the solution is to replace the cracked part. Consumers can contact the manufacturer or seller to purchase the same type of flooring for compensatory repairs.

How to repair the floor tiles- Repair of gaps.

If the gap between the floors is more than 2mm, it must be repaired. If it is less than 2mm, it does not need to be repaired and returns to normal after autumn and winter. If the condition is severe, the floor needs to be removed and replaced. At this point, expansion joints need to be reserved to prevent the floor from expanding when wet.

How to repair the floor tiles- Cracks in autumn do not require emergency repairs.

In autumn, it is normal for floor tiles to crack due to seasonality. The air will be drier in autumn. The reason for cracking wooden floors is that water is volatile.

If repaired at this point, the water will continue to evaporate. As a result, the floor in the fall has a serious cracking problem, so it cannot be solved first.

1. Cleaning method: For the scratches on the tiles, it is not serious. You can apply toothpaste and wipe it with a soft cloth. It must have worked well.

2. Positioning method: Find some colored paint similar to ceramic tiles and apply it to ceramic tiles.

3. Replacement method: If the tile scratches are very serious, you can replace them with new tiles to ensure that the whole tile is beautiful.

You can get it for free

1. How to repair floor tiles

1.Repair hollow wall tiles: The floor tiles in the room have a hollow drum on the edge of the brick, which can be watered for some hollow drums (break the gaps between the tiles with a small shovel, then pour cement into the gaps, and then suck the hollow drums off) to avoid the whole replacement until the curing is complete).

2.Repair method of partial hollow floor tiles: If there are some partial hollow drums on the tiles of the walls and floors, you may have to treat them without affecting the stable installation of the furniture, knock on part of the tiles and reinstall them.

3.Repair of hollow floor tiles: It is advisable to remove and reinstall large areas of floor tiles, glue for packaging is especially important, if the tile area is small, you can use high-quality cement that is stronger than cement.

You can use tile adhesive, and if there are several tiles in a small area, it is better to use high-quality cement instead.

Second, the cleaning and maintenance methods of ceramic tiles

1.Stains that remain on the surface of the tiles every day can be cleaned with detergent and soapy water.

2.In order to restore the luster of the tile, washing with soap and an appropriate amount of ammonia and terpenes can achieve the purpose of restoring the luster of the tile.

3.Some polished tiles require regular waxing to keep the tiles smooth. Waxing intervals are usually 2-3 months.

4.If there are ferrous metal scratches on the surface of the tile or in the joints between the crevices, sprinkle some commercially available decalcification product on it, wait a minute or two, and then wipe it clean with a dry cloth.

5.Sometimes tiles and caulks should be treated with descaling products to remove dirt.

The above is a detailed introduction to how to repair floor tiles and how to clean and maintain tiles.

Where the floor tiles appear hollow, you can pour some water, and then fill in the cement, after filling it must be dried for a few hours, and we can clean it with detergent when cleaning.

To use a special adhesive, you can seek the help of professional and technical workers when repairing, and you can usually wipe it with a wet towel dipped in some water, and be sure to ensure that the ground is clean and tidy.

You can replace it with a new floor tile, or use some paint to repair it, clean it on time, pay attention to the glaze of the tile, and you can re-maintain the tile.

You should choose a good quality sewing agent and repair it in this way. You can usually use a deerskin rag for cleaning and maintenance.

Ceramic tile is a very common material in home decoration, if the tile is used for a long time, there will be some problems, such as the tile suddenly falls off the wall, or the tile will leave some scratches because of people's careless behavior, no matter what kind of problem the tile has, it will affect the overall decoration effect of the tile, so if people do not want to replace the tile, they must repair the tile, and there are still a lot of ways to repair the tile. Today we will specifically introduce you to the matters of tile repair.

Analysis of the reasons why tiles need to be repaired

Wall deformation causes: Tile cracking caused by wall deformation, which will show regular cracks in the horizontal, vertical or oblique directions. The unqualified adhesive results in:

Unqualified adhesive will also lead to problems such as hollowing and falling off after tile paving. Traditional paving tiles usually use cement mortar as paste, cement and mortar are usually proportioned according to the ratio of 1:1, if the ratio is uneven, cement mortar can not achieve the required bonding effect; In addition, the high soil content of the sand and the use of inferior or expired cement will lead to problems such as poor pasting and hollowing and falling off of tiles.

Specific methods of tile repair

Repair composite tiles: use floor tile repair agent to repair tile scratches, use a brush dipped in the repair agent to draw at the scratch gaps, paint again after 30 minutes, and repeat again after drying, until the scratches are reflective from the side, so that the scratches can be kept clean for a long time after treatment; In addition, scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be pits or greater damage to the brick surface, such as matte, wider scratches.

Repair metal tiles: Reason iron frame or aluminum alloy on the floor tiles during decoration, what to do if the floor tiles have scratches, the focus point of metal push and pull is small, the pressure is large, and the traces of metal can penetrate into the inside of the brick surface, which is difficult to clean, and the surface is easy to be damaged with acid, how to deal with the scratches on the tiles, how to remove the scratches on the tiles, and how to remove the scratches on the floor tiles is a cleaning problem faced after cleaning. So how do you clean metal scratches from floor tiles?

In order to be able to remove the metal scratches on the floor more effortlessly and quickly, you can soak it with detergent for 3 minutes and then scrub the fingers, the floor tile cleaner will become loose after the reaction with the metal scratches will become loose, wipe with a wet towel with a little hard detergent, and the clean brick surface will be displayed immediately, which will not affect the surface of the floor tiles, and the luster will not change in any way.

In today's article, we mainly introduce to you some information about tile repair, before formally understanding the method of tile repair, you should first know why the tile needs to be repaired, we have introduced a total of two reasons that may lead to the need for tile repair, after understanding the reason, we began to introduce the method of tile repair for you, we introduced the repair of composite tiles and repair metal tiles, you can go to the specific understanding.

You can get it for free

Dear, I am glad to answer for you: The steps for repairing damaged floor tiles are as follows:1

Find a tile that matches, preferably with other tiles. Some owners keep some at the time of installation to prevent breakage. It is wise to do this, and then use a grout saw to remove the mud around the broken floor tiles.

2.Hit the center of the broken tile with a hammer and nails. The aim is to drill a hole in the tile without damaging the floor underneath the tile and make an "X" shape on the tile with a glass knife (a marble machine - specialized in cutting tiles, but it is a bit expensive to buy one yourself).

Be careful not to scratch the four corners of the tile, preferably leaving 5 to 10 cm. How to use a hammer and chisel to break broken Anwar's tiles and pry them out. 3.

Clean up the place, get rid of debris. Specifically, it leveled the ground and threw wool on the ground. Then sprinkle water and wait for the water to dry before using a serrated spatula to spread the adhesive evenly to the bottom of the new tiles.

4.Place the new tiles on the floor and gently press them with your hands. The new floor tiles should be kept equidistant from other floor tiles.

Leave it overnight to allow the adhesive to air dry, after which grout (caulk) is used to remove excess mud with a damp sponge. Precautions: Be sure to soak in water before tiling and paving, otherwise the paste effect will not be good.

When repairing the floor tiles, you need to wear protective glasses, after all, novice operators will inevitably call a section injury. Do not walk on the repaired tiles for 24 hours.