How to turn on Midea s remote control electric auxiliary heating? How to turn on the electric auxili

What is the icon of electric auxiliary heating for air conditioners.

When the electric auxiliary heat is turned on, a wavy line pattern will appear on the remote control, and the icon of the wavy line will also be displayed on the display screen of the vertical cabinet.

The principle of electric auxiliary heating of air conditioners.

Air conditioner electric auxiliary heating is actually a device that installs an electric heater inside the air conditioner, similar to a small solar heater, by converting electrical energy into heat energy. This can make up for the shortcomings of the poor heating effect of the air conditioner in the case of extremely low temperatures in winter. The air conditioner blows the heat energy generated by the electric auxiliary heating device into the room, causing the room temperature to rise.

Its disadvantage is that the energy efficiency ratio is relatively low. The direct conversion of electrical energy into heat energy is too power-consuming, so it is recommended to turn it on when the outside temperature is below 0 degrees.

How to turn on the electric auxiliary heat of the Midea air conditioner

Midea air conditioner electric auxiliary heat opening method: first turn on the air conditioner, press the air conditioner switch, and adjust the air conditioner to the heating mode. Then press the "Function" button on the remote control to enter the state of special function selection, then press the "Adjust" button to select the electric auxiliary heat, and then press the "OK" button on the remote control to turn on the electric auxiliary heating function.

If there is an auxiliary button on the remote control, click the auxiliary button.

<> How to turn on the electric auxiliary heat of the Midea air conditioner: 1. First of all, on the remote control of the Midea air conditioner, press the "Run on and off" button. 2. Then on the remote control of Midea air conditioner, press the "Mode" button to set the "Heating Mode".

3. After that, on the remote control of the Midea air conditioner, the "heating mode" is displayed. 4. Then on the remote control of the Midea air conditioner, press the "Auxiliary Heat" button.

This answer is applicable to Midea KFR-26GW N8MJA3 and other air conditioning models.

<> brand: Midea Air Conditioner, model: KFR-35GW N8MJA3.

The detailed operation steps of the remote control heating are as follows:

1. The first step is to power on and connect the power supply of the air conditioner.

2. Then put on the battery of the air conditioner remote control, if there is no battery, the remote control will not work.

3. Then you can turn on the switch of the Midea air conditioner and point the remote control of the Midea air conditioner at the Midea air conditioner.

4. Select the mode button of the Midea air conditioner remote control, or the function button of the Midea air conditioner remote control, and look at the pattern on the screen of the Midea air conditioner remote control.

5. If the pattern on the remote control of the beauty air conditioner shows a small sun, then it proves that the air conditioner is already in heating mode, so that the beauty air conditioner can come out with hot air.

How to modulate thermoelectric auxiliary heat of Midea air conditioner: 1. First of all, on the KFR-35GW dy-GA (E5) remote control of Midea air conditioner, press the "Run on and off" button.

2. Then on the remote control of the Midea air conditioner KFR-35GW DY-GA (E5) air conditioner, press the "Mode" button to set the "Heating Mode".

3. After that, on the remote control of the Midea air conditioner KFR-35GW DY-GA (E5) air conditioner, the "heating mode" is displayed.

4. Then press the "Auxiliary Heat" button on the remote control of the Midea air conditioner KFR-35GW DY-GA (E5) air conditioner.

5. Finally, on the remote control of the Midea air conditioner KFR-35GW DY-GA (E5) air conditioner, turn on the electric auxiliary heating function of the air conditioner.

This answer is applicable to most air conditioning models such as Midea's KFR-23GW DY-K8 (E3) and Midea's KFR-72LW DY-X (E2).

<> brand model: Midea Air Conditioner KFR-35GW N8MJA3.

The specific opening method of Midea air conditioner electric auxiliary heat is as follows:

1. On the remote control of the Midea air conditioner, find the switch button and press it to turn on the air conditioner. As shown below: <>

2. Find the mode button, press the mode button, and adjust to heating mode. As shown in the figure below: <>3. Heating is displayed on the remote control. As shown in the figure below: <>

4. Continue the operation and press the auxiliary heat button on the remote control. As shown in the figure below: <>5, check the auxiliary heat displayed on the remote control. As shown in the figure below, <> through the above steps, you can successfully turn on the auxiliary heating function, and you must operate step by step in order.

To turn on the electric auxiliary heating function of the Midea air conditioner, first make sure that the air conditioner has this function, and then look at the remote control of the air conditioner to see if there is an electric auxiliary heating button, if there is an electric auxiliary button on the remote control, you can turn on the electric auxiliary heating function by pressing the button directly, if there is no button on the remote control, you need to press the function selection on the remote control, and after finding the electric heating function, you can start it.

To turn on the electric auxiliary heating function of Midea air conditioner, you can follow the steps below:

Locate the power button on your aircon's remote control and make sure your aircon is turned on.

Confirm whether there is a button with the electric auxiliary heating function on the remote control. This is usually a stand-alone button that may be labeled on it"Secondary heat"、"Electrically heated"or something similar. If you don't have a standalone button, you may need to press the other corresponding function buttons to enter the settings menu.

Press the electric heating button, and there will usually be an indicator light that lights up to indicate that the function is on.

Make sure you set the proper temperature and wind speed. In electric heating mode, the air conditioner heats the indoor air with electricity, so you can choose the right temperature for your individual needs.

If needed, you can also adjust the wind direction and swing function for a more comfortable air-conditioning experience.

Please note that the exact operation method may vary depending on the model of the air conditioner. If you don't have a clear electric heating button on your aircon remote control, it is recommended to consult the user manual of your Midea aircon or contact Midea's customer service for accurate operation guidance.

Tool Material: Midea KFR-72LW BP2DN1Y-CJ200 Air Conditioner Remote Control.

1. First of all, press the "on/off" button on the remote control of the Midea KFR-72LW BP2DN1Y-CJ200 air conditioner.

2. Then the Gree Junyue air conditioner Midea KFR-72LW BP2DN1Y-CJ200 air conditioner was turned on.

3. Continue to press the "Mode" button on the remote control of the Midea KFR-72LW BP2DN1Y-CJ200 air conditioner.

4. On the screen of the remote control of the air conditioner of the KFR-72LW BP2DN1Y-CJ200, the display switches to "heating mode".

5. Finally, on the remote control of the Midea KFR-72LW BP2DN1Y-CJ200 air conditioner, press the temperature button up and down to adjust the heating temperature of the Midea KFR-72LW BP2DN1Y-CJ200 air conditioner.