Dear, how to repair the broken ceramic bowl?

Go buy a bottle of the kind of glue that repairs water pipes and sticks shoes on the construction site is packed in tin cans, the effect is very good and it is very practical to stick ceramic, it won't dry as fast as 502, at least apply it for 5 minutes and gently press it tightly, let it dry on it, my cup is the glue that is used when the lid is thrown into two, if you are too troublesome to get the place where the shoes are glued and let him help you stick it, it won't cost much.

Ceramic tableware is a consumable and fragile product, how can it not be damaged.

In general, don't buy too thin, hot, and fragile ones for household use; Medium thickness, bone china is finer and stronger.

Don't have too many patterns on the inner wall, it is not easy to clean, and it will volatilize some harmful substances, and the general one is fine.

I'm in Jingdezhen, and the ceramics here are very good, and it's very good to pick the right one.

1. First of all, prepare the tools for repair, including a special grinder, rag, and water.

2. Use a special grinding machine to thoroughly polish the broken part of the ceramic tableware, because there is grease left at the broken part of the tableware, and if the grease is not disposed of, it will produce a softening reaction after encountering high temperature, resulting in the separation of the repair mud and the tableware.

3. After the bottom layer is processed, wipe the surrounding area with a rag and put it aside to be coated with mud.

4. Carefully fill in the original appearance of the ceramic tableware, and repair it according to the above steps, there will be unexpected surprises.

Materials: caulking glue, sandpaper, colored pencils, soft cloth.

Repair method: 1. Place the ceramic cup on the machine and fix it.

2. Use a clean cloth to wipe off the dust on the surface.

3. Apply the joint glue evenly to the cracks of the cup and wait for it to dry.

4. Use sandpaper to polish the protruding rubber block.

5. Use a colored pen to fill the color according to the original appearance of the cup, and spray the lacquer.

6. The cracks in the ceramic cup have been repaired.

If the porcelain bowl is broken, let's talk about a way to repair the broken porcelain back together.

The first step is to make wheat paint.

What is Wheat Paint? Wheat lacquer is made with wheat flour.

It is a repair material mixed with lacquer (a type of natural lacquer) and stirred evenly.

1. Stir the wheat flour well with water, stirring well until it is as soft as dough.

2. Mix the lacquer into the wheat flour and continue to stir until you can pull out the silk with a chopstick or wooden stick. This is the "wheat paint".

Step 2: Patching.

1. Prepare the broken porcelain fragments first, and then apply wheat paint to the edges of the broken fragments.

2. Then align the broken pieces with the other piece and do so until all the pieces are glued together.

3. Remove the spilled part of the wheat paint with a wooden board shovel.

4. Let it stand until the wheat paint is completely dry. Because it takes a long time for the wheat paint to dry, plastic wrap can be used during this period.

Wrap around in case you accidentally bump and break again.

5. After it is completely dry, you can remove the plastic wrap, and then use the "concentrate" (the concentrate is made of lacquer and stone powder) at the joint.

6. After all the dries, apply the same pigment as the color of the porcelain on the fracture to make it consistent with other textures.

Materials required: raw lacquer, black lacquer, egg whites or glutinous rice flour, gold leaf.

Gold repair tools: knives, sandpaper, pens, hair dryers, electric kilns, utility knives.

Practice steps: 1. Fix the tire with raw lacquer, coat it on the ceramic section, and bake it in the kiln.

2. Prepare glued lacquer, two formulas: black lacquer plus protein, or black lacquer plus glutinous rice flour.

3. Stir until the paint becomes viscous, and stir with a hair dryer while heating to accelerate the reaction.

4. The ceramic section is coated with glued lacquer.

5. Glue the pieces tightly together.

6. The state after the bonding is completed.

7. Fill the surface gaps between the fragments: small cracks, fill them with glutinous rice and lacquer blending paste; Large seams, which can be filled with wood powder paint or lacquer line drawings.

8. After filling is completed, polish it with sandpaper.

9. Apply a layer of red paint to the cracks.

10. After the paint is half dry, cut the gold leaf to a suitable size, and paste the gold leaf on the lacquer.

11. a finished product.

Kiss! Hello, happy to answer your <>

Pro-material: seam glue, sandpaper, colored pen, soft cloth repair method: 1. Put the ceramic cup on the machine and fix it.

2. Use a clean cloth to wipe off the dust on the surface. 3. Apply the joint glue evenly to the cracks of the cup and wait for it to dry. 4. Use sandpaper to polish the protruding rubber block.

5. Use a colored pen to fill the color according to the original appearance of the cup, and spray the lacquer. 6. The cracks in the ceramic cup have been repaired. Hope mine can help you <>

Do you have any other questions?