Gigabit network wifi at home is very slow, what should I do if the wifi network speed at home is slo

Slow internet speed refers to slow connection to the router on the mobile phone and computer?

This speed has to do with several things:

Router: If your router is below wifi6, then even if you have a gigabit network cable, it is useless, because your router can't hold it, according to the requirements of gigabit broadband, the network card and router port must support the data transmission rate, and the wireless network must also support the wifi6 standard.

Note: The optical modem also needs to look at how many megabytes the optical modem has to write port, but you will generally be equipped with gigabit broadband if you install it, but there may be poor configuration, which is generally unlikely;

Receiving device (mobile phone computer): Your router is wifi6 but the device you use (mobile phone computer) is not, it is equivalent to your mobile phone can not receive so much traffic, the network speed will naturally slow down, the device is wifi can see the configuration of the device, generally will write;

Operators: Some operators are not very stable, you know!! And if there is a certain amount of network congestion during peak hours, this is normal;

If it is not for the above reasons, you can test the network speed to see if it is your operator's broadband failure, and you can call ** to report the broadband failure to the operator! Someone will come to the door within 48 hours to deal with it.

The gigabit router at home is very slow, one may be a network card, and another may be a real card.

The network card is likely to be caused by the large loss of the optical cable. And the router card is probably the reason for the router itself, so you can only change to a better router. Generally, routers like Mercury Tengda Express are easy to card after a long time, while routers of well-known brands such as Huawei TP are not easy to card.

Wireless routers send signals across the board, and the closer the router is to obstacles, the more easily the signal is suppressed. Therefore, you should choose a high and spacious location in your home to place the router so that the signal can radiate downwards and reduce the blocking of obstacles and signal blind spots.

Routers transmit data information in the form of data packets. Electrical appliances, glass, and metal items will cause obvious interference to the signal, resulting in transmission blockage. Friends can keep the router away from the above categories of items to reduce interference.

1. If the router version is older, then regularly updating the firmware can ensure that the software of the router is in a good and efficient operating state.

2. If the wireless router at home has been used for too long, it will be a good choice to replace it with a new dual-antenna or multi-antenna router.

1. Buy a wifi repeater: plug the repeater into the socket at home, and the signal range and strength can be enhanced after debugging.

2. Reuse of old routers: Set the old router to AP mode, and then connect to the existing main router through the LAN port to expand the signal.

3. Adjust the antenna: Most router antennas are placed in a "ring", and in the vertical direction, the signal coverage will be wider. The antenna can be adjusted appropriately according to the distance and angle.

Usually the router is factory set to mixed mode with a set rate of 75%.

1. Adjust the rate: The partner can enter the security settings and adjust the rate of the router to the maximum.

2. Select Single Protocol: Set the mode to use only protocol.

Open the browser, enter the router address and username and password, check whether there is an unfamiliar device in the corresponding menu, and compare the IP address with your own hardware.

Then send the friends three magic weapons to prevent rubbing the net.

1. Set a complex password.

In the Tab or Security, select the WPA-PSK WPA2-PSK password and set a complex, easy-to-remember, and hard-to-guess password.

2. Disable the DHCP function.

In the Local Area Network (LAN) settings, disable the DHCP function to prevent automatic IP address assignment to wireless clients.

3. Change the default IP address.

If it defaults, it can be changed to prevent easy guessing.

1. Confirm the specific phenomenon of slow network speed.

First determine whether it is a router problem or a problem with the mode bandwidth network, connect the computer wirelessly through the wifi router, and then test with 360 bandwidth, if there is only 1m or 2m this lower than the applied 10m or 20m bandwidth, it means that there may be a problem with the router and mode, then first remove the router, directly plug the mode out of the network cable into the laptop with a wired connection, and then use 360 to test, If the bandwidth has been restored to 10m or 20m, it means that the router is a problem.

If the tested network speed is close to the requested bandwidth value, it generally means that there is no problem with the network speed. After connecting the router, if the test speed is significantly lower than the requested bandwidth value, please proceed to the next step.

2. Check the settings on your router.

Check whether the router has the IP bandwidth control function enabled, and if so, turn off the function and confirm the speed again. Generally, this restriction is not turned on by default, so we need to make sure if a family member or colleague has changed it. If you have set this rule before, the network speed will be slow if it is not set up properly or incorrectly.

It is recommended to temporarily remove or turn off the restriction to experience the speed again.

The broadband at home is 300 megabits, and the router is also replaced with gigabits, why is the network still not good?

It may be that the broadband bandwidth is small, or it may be limited by the computer network card, and the optical router is gigabit useless.

According to the law of barrels, the maximum amount of water a barrel can hold depends on the shortest plank.

Check whether the network speed of the connected broadband is normal, if it is normal, please initialize the router, try to set it again, if it still doesn't work, please replace the router.