What are the dangers of spraying to the body? Is spraying a plastic worker harmful to the body?

The spraying powder used for spraying is mainly acrylic powder, polyester powder, etc., and the harm to the human body after these powders melt is:

1. Toxicity of organic solvents, if people inhale the vapor of organic solvents for a long time, it will cause chronic poisoning, but short-term exposure to high concentration of organic solvent vapor will cause the risk of acute poisoning.

2. Harmful to contact, contact with ** will dissolve ** oil and penetrate tissues, interfere with physiological characteristics, dehydration; Caused by dry cracking and bacteria.

3. Hazards caused by respiratory organsMost of the blood vessels inhaled after inhalation are transported to other organs through blood or lymph, resulting in varying degrees of poisoning, as well as systemic diseases characterized by hematopoietic damage.

4. After the digestive organ is damaged, the general symptoms of machine solvent poisoning are headache, fatigue, loss of appetite, dizziness, etc. High concentrations of acute poisoning can compress the central nervous system, leading to loss of consciousness.

If the protection measures are not good, the dust will enter the lungs through the respiratory tract, and after a long period of accumulation, it will get pulmonary disease! Be sure to take precautions, wear a safety mask, and pay attention to ventilation!

Nowadays, many manufacturers pay attention to environmental protection, choose environmentally friendly automatic spraying equipment, avoid dust overflow, and employees basically work in a dust-free state.

Spraying is toxic, because spraying powder will be used in the spraying process, the main components of spraying powder are acrylic powder, polyester powder and other substances, which may lead to dry cracking and bacterial infection after contact with the spraying powder, and long-term inhalation of spraying powder will cause chronic poisoning, and it will also lead to acute poisoning in an environment with a high concentration of spraying powder.

Spraying is toxic

Spraying is toxic, and spraying usually refers to electrostatic powder spraying, which mainly uses a classic emitter to electrify the plastic powder and then adsorb it on the surface of the parts to be treated. In this process, the spray powder also needs to be baked at 180 220 °C, if the spray powder is accidentally inhaled into the lungs, it will be extremely harmful to the lungs.

The main components of spraying powder are acrylic powder, polyester powder and other substances, after these ingredients come into contact with the **, they will gradually dissolve the oil on the ** and penetrate into the inside of the ** tissue, which is likely to cause **dry cracking, bacterial infection and other uncomfortable symptoms.

If people inhale spray powder for a long time, it may cause chronic poisoning, and in a short period of time in a high-concentration spray powder environment, it may also lead to acute poisoning, which will seriously threaten life safety. Therefore, when spraying or in an environment with spraying powder, corresponding protective measures should be taken.

No poison. Electrostatic spraying of spraying plastic, no thinner material is required, and the construction is non-polluting to the environment and non-toxic to the human body; The coating has excellent appearance quality, strong adhesion and mechanical strength; Short curing time for spraying construction; The corrosion and wear resistance of the coating is much higher; No primer required; The construction is simple and the technical requirements for workers are low. The cost is lower than that of the painting process; Some construction occasions have clearly stated that electrostatic spraying must be used.

No poison. Electrostatic spraying of spraying plastic, no thinner material is required, and the construction is non-polluting to the environment and non-toxic to the human body; The coating has excellent appearance quality, strong adhesion and mechanical strength; Short curing time for spraying construction; The corrosion and wear resistance of the coating is much higher; No primer required; The construction is simple and the technical requirements for workers are low. The cost is lower than that of the painting process; Some construction occasions have clearly stated that electrostatic spraying must be used. There is no run-off during the electrostatic powder spraying process, which is common in the painting process.

Plastic spraying is to charge the plastic powder through high-voltage electrostatic equipment, and spray the paint to the surface of the workpiece under the action of the electric field, and the powder will be evenly adsorbed on the surface of the workpiece to form a powdery coating; The powdered coating is leveled and cured after high-temperature baking, and the plastic particles will melt into a dense final protective coating with different effects; Firmly adheres to the surface of the workpiece.

It is harmful to the body, and it is easy to cause cancer after a long time, so you must wear a protective mask and gloves when working, and wear good work clothes and pants to protect your body.

Compared with painting, spraying is more complicated, it is a process that sprays paint powder directly on the product through equipment, so as to play a protective and decorative role, spraying is also commonly known as electrostatic powder spraying. Spraying is a widely used metal surface treatment technology, which is widely used in hardware, home decoration and building materials.

Spraying can directly use paint powder, which does not need to be diluted with liquids, and is less harmful to the environment and the human body. The quality of the coating after using this electrostatic spraying is very good, and the adhesion is also strong; The technical requirements for workers are also relatively low, the curing time is short, and there will be no liquid sagging. However, spraying also has the disadvantages that the surface is not easy to repair and the cost is high.

Plastics mainly contain benzene, if perennial exposure to fluoride and benzene and other toxic and harmful substances. It may have an impact on all systems of the body. Occupational disease hazards that may occur when engaged in injection molding work for a long time.

Therefore, the cumulative maximum working time of such a type of work should generally not exceed eight years, and it is necessary to pay attention to regular physical examinations.