What to do with wallpaper degumming in house decoration

There are two situations of wallpaper degumming after house decoration: first, the wall is intact, but the wallpaper is simply stilted, degummed and degummed in a small area; The second is that the wallpaper falls off along with the plaster or wall paint on the wall. It can be processed according to different situations.

If the first situation occurs, the detached wallpaper can be sprayed wet with water, and then on the disconnected part, that is, on the back of the paper and the wall to brush the special wallpaper joint glue, and then use a special scraper to scrape along the direction of the wallpaper degumming opening, pay attention to the strength, and repeatedly scrape the smooth; The second situation is more troublesome, and professional workers should be hired to operate if necessary.

There are also many reasons for degumming, so first you have to analyze it.

If the wall is not treated well, such as a painted wall direct sticker, the wallpaper is easy to separate from the wall, giving you the feeling of degumming. This situation can only be reposted.

If the glue is not sticky enough or the glue is not brushed evenly during construction, a small amount of glue can be injected into the tip of a syringe to supplement, and then strengthened with a scraper. This method is only used for degumming in small quantities.

You can go to a store that sells wallpaper, order glutinous rice glue, and then buy a needle tube to pump the glue into it and inject it into the edge degumming place, and press it with a scraper. Glutinous rice glue must have high viscosity, and it is recommended that you use five major ones.

Either ask the master to glue carefully, if you are not too troublesome, go to buy a decorative corner line that is more beautiful and wallpaper, and fix it in the place where the edge is closed, which will not look good and will not look bare there, after all, no matter how good the glue is, there is a day of edge.

If the degumming area is not large, it can generally be processed by yourself.

Find a wallpaper store to patch the glue point at the open glue and flatten it.

If the area is large and difficult to deal with, you need to find a professional master to repair it.

Generally, wallpaper shops are responsible for post-maintenance.

Dip with wallpaper glue; Look at who you asked to post at that time; I have degummed the wallpaper after pasting, as long as ** calls, we will deal with it;

The wallpaper is turned up, and it can be reworked according to the situation; If the local treatment is not properly cleaned, it can be re-cleaned and glued with a repair adhesive, such as the glue is small, and the adhesive with strong viscosity can be replaced.

The specific repair method after the wallpaper warping is as follows:

1. Prepare the following wallpaper trimming equipment: silicone wallpaper repair glue, electric iron or hair dryer, syringe, scraper.

2. Slowly squeeze the silicone wallpaper repair glue into the syringe.

3. Take out the syringe that has just been squeezed out of the silicone wallpaper repair glue, and use the syringe to apply the wallpaper repair glue to the bottom of the cracks in the wallpaper.

4. Take a scraper in your hand and gently scrape the wallpaper with a scraper, so that you can scrape out the excess glue and wipe it clean.

5. Finally, use an iron or hair dryer to iron out the cracked or warped places to prevent the wallpaper from warping before the glue takes effect.

Broken wallpaper is a common thing, usually due to scratches by hard objects or accidental bumps when moving. At this time, the damage in a small area can be repaired with glue; If the area is large, it is generally recommended to re-pavement.

Wallpaper is a commonly used home decoration material, there are many categories of wallpaper, choose the right wallpaper to decorate the home while paying attention to its cleaning and maintenance. Due to the different materials of wallpaper, the cleaning and maintenance methods are also different. In order to maintain the wallpaper to the greatest extent, we should adopt different maintenance methods for different types of wallpaper.

Glutinous rice glue.

Wallpaper warping may be due to the base treatment is not clean, the adhesive adhesion is too low or the wallpaper edge of the corner is less than 2mm, etc., when choosing wallpaper powder or glue, it is also best to choose pure natural products;

Glutinous rice glue is non-toxic, odorless, widely used, suitable for all wallpaper types, after the wallpaper is pasted, it should be cleaned regularly with a vacuum cleaner to avoid the collision of hard objects such as furniture. If the wallpaper is close to a humid environment such as a bathroom, also pay attention to waterproofing.

Use a damp cloth or dry cloth to scrub dirty places, and do not use some colored raw materials to contaminate the wallpaper, otherwise it is difficult to remove; Wiping the wallpaper should start in some remote corners or hidden places behind the door to avoid adverse reactions to cause damage to the wallpaper.

According to the cleanliness of the wallpaper, at least repeat the above steps of spraying, cleaning and water absorption, and start the wallpaper dryer to let the wallpaper dry thoroughly.

The staff uses neutral wallpaper maintenance liquid to prevent fouling and cracking on the wallpaper, forming a protective film on the surface of the wallpaper to achieve the effect of anti-fouling and dust-proof and prolong the service life of the wallpaper.

There are several cases of glue moisture on the wallpaper:

First, the treatment of PVC wallpaper.

1. PVC wallpaper is a type of wallpaper that is corrosion-resistant and scrub-resistant, which can be cleaned with a special wallpaper cleaner.

2. If the wallpaper has not been pasted for a long time, you can use a clean rag or sponge to wet it and wipe it gently.

3. If the glue has dried for a long time, you can try to soak it with water to see if it will soften, if it doesn't react, try to erase it with a clean eraser.

Second, the treatment of pure paper wallpaper.

1. You can use a clean rag or sponge to wet it and wipe it gently.

2. If there is a logo on the wallpaper label that "can be wiped with soft soap", you can choose a clean white towel dipped in the aqueous solution of laundry soap to wipe on the glue marks, and then wipe with a wet towel to remove it.

3. If the glue marks are dry, you can erase them with an eraser.

3. Treatment of non-woven wallpaper.

1. Before the glue marks are dry, you can use a damp sponge for a small area of soaking.

2. If the glue mark is dry, you can use a clean eraser to erase it.

Solution:

1) PVC wallpaper, cloth wallcovering and other corrosion-resistant, scrub-resistant wallpaper types, can be cleaned with a special wallpaper cleaner.

2) Pure paper, non-woven wallpaper, optional clean white towel dipped in the laundry soap mixed with water solution to wipe on the glue marks, and then wipe with a wet towel to remove. Be gentle and avoid excessive discoloration.

For waterproof coatings, cleaning the wallpaper glue with alcohol will not cause much damage to the wall, but the volatilization of alcohol can minimize the damage to the wall. However, one thing to note is that the concentration of alcohol should not be too high, otherwise it will be too volatile, and it is easy to turn the white wall yellow or black, which is a very bad phenomenon.

Milan wallpaper experts have you covered: you can use a hot towel or a slight fire to bake it, wipe it clean and you'll be fine.

Blow a hair dryer, or compress hot water, wipe it off with a thick towel.

When the hair dryer is hot on the glue, wipe it with a towel.

Wipe with a sponge, dry without water.

Self-adhesive wallpaper degumming can be done with glutinous rice glue, which is more green and environmentally friendly.

Glutinous rice glue is made of natural glutinous rice starch as raw material, and there is often no need to add other viscosity substances in the production process, which is more environmentally friendly than other wallpaper glue. As an environmentally friendly product, glutinous rice glue can meet the highest environmental protection standards of the European Union. In order to ensure smooth pasting, self-adhesive wallpaper must be kept dry and free of mold, grease or other dirt.

Separate the film from the liner and stick it along the wall from top to bottom, gently building up the folds from the middle to the sides, and the slightly larger bubbles can be punctured with a needle to squeeze out the air. When encountering a power switch or outlet, you can first cover the wallpaper on it, brush it flat with a wooden handle, and use a utility knife to draw a cross in the form of a diagonal line on it.

In fact, wallpaper is not as complicated as everyone thinks, it only takes two days, and after a few simple steps, you can put on beautiful wallpaper.

Day 1: Inspect and treat the walls and measure the area to be wallcovered.

Step 1: Wall treatment.

First of all, four parts of the wall need to be inspected.

1. Visually inspect whether the wall is peeling, cracking, etc.;

2. Find a hard object (such as a key) and scratch it on the wall to observe whether the slag is dropped;

3. Find a blunt instrument (such as a small hammer) to knock on the wall and check whether there is a hollow drum;

4. Splash some water on the wall, rub it on the wall with your hands or a wet rag to observe whether it will be stained with white ash.

Step 2: Measure.

Secondly, it is necessary to take a wall measurement to calculate the area of the wallpaper in detail.

Step 3: Apply the base film.

1. Remove the cement wall to make it clean, dry and free of floating ash.

2. Use putty to fill the potholes on the wall, and brush the wall with wallpaper base film to protect the wall, which is conducive to moisture-proof and mildew-proof.

3. If the wall has been subjected to moisture, use the wallpaper base film for special treatment to kill mold.

4. If one side of the wall is a bathroom, the inner wall of the bathroom must be specially treated with a wallpaper base film, otherwise the wall will be damp for a long time and the wallpaper glue will fail.

5. Do not paste wallpaper on the damp part of the local wall, and treat the symptoms after finding and removing the root cause of dampness.

That's the task for the first day, it's just three simple steps, isn't it easy, but remember, wall treatment is important.

Day 2: Wallpaper laying.

After the painted wallpaper base film is completely dry, it generally takes 12-24 hours. After the base film is dry, the construction of the wallpaper installation begins. When it is over, it is recommended to close the doors and windows and let them dry in the shade.

The pasting of wallpaper must use environmentally friendly glue, and it is best to use water-based wallpaper glue made of potato flour and wheat. You can go to the local building materials city to understand, the most afraid of wallpaper is that the wallpaper glue is not environmentally friendly, formaldehyde is mainly present in the adhesive, so the wallpaper glue is very important.

How to paste the wallpaper:

After the wall is leveled, then measure the size of the position to be pasted, cut it first, and then draw the distance first, and then make sure that there is no problem, then lay the wallpaper on the floor after making sure there is no problem, brush it with a special barrel of glue, and then post it from top to bottom according to the requirements, when pasting it can not be too fast, while pasting it with a towel or something else on it slowly brushed down, so that there will be no bubbles, if it is crooked, it doesn't matter, you can do it again, because it is not so quick to dry, if it is a puzzle or a flat flower, If it is really blistered, and you don't want to re-paste it, remember to pierce it with a needle in the fastest time, and then scrape it flat with a scraper to squeeze the air out.

You can buy forced rubber powder, or you can use 901 building to teach white latex.

Wallpaper glue opening is a normal problem.

It is roughly caused by improper construction.

Where do you buy wallpaper, you can contact the store and ask a worker to repair it, if you don't buy the wallpaper at your local store, you can go to the local wallpaper store and buy a set of wallpaper glue to repair it yourself.

To use a special wallpaper glue ** in a group of about 40 yuan All wallpaper stores have ** If you buy glue yourself, you can ask the store if you can just buy glue Don't glue powder, because the glue is not powdered, if you repair the wallpaper, Guangyong glue can be.

1. The wall surface is intact, but the wallpaper is simply stilted, degummed and deglued in a small area; The second is that the wallpaper falls off along with the plaster or wall paint on the wall. It can be processed according to different situations.

2. If the first situation occurs, the detached wallpaper can be sprayed wet with water, and then on the disconnected part, that is, on the back of the paper and the wall brush on the special wallpaper joint glue, and then use a special scraping remorse piece to scrape along the direction of the wallpaper degumming opening, pay attention to the strength, and repeatedly scrape and smooth it; The second situation is more troublesome, and professional workers should be hired to operate if necessary.

Nowadays, when many people decorate the wall of the house, in order to make the home more warm, and at the same time, in order to make the decoration more high-grade, some will choose to paste wallpaper on the wall, but some wallpaper will be degummed and warped after a long time, so how to repair it after encountering this situation? Today, I will explain to you the method of quickly fixing the enforcement.

First, how to repair the degumming and warping of wallpaper.

1. Prepare some tools that need to be used for repair, such as wallpaper repair glue, hair dryer, syringe, and scraper.

2. Pour some wallpaper repair glue into the syringe, and then use the syringe to evenly apply the wallpaper repair book to the back of the wallpaper degumming edge.

3. Scrape the wallpaper flat with a scraper, and wipe the excess repair glue with a clean rag.

4. Use a hair dryer to blow the freshly repaired wallpaper to make the wallpaper stick better to the wall.

Second, why does the wallpaper appear degummed and warped?

1. When posting wallpaper, the glue applied is not very even, resulting in the edge of the wallpaper not being smeared.

2. The viscosity of the wallpaper glue is not good, and there is no way to deal with the wall for a long time, and it is well bonded to Bibi.

3. The humidity at home is relatively large, and the wallpaper will be degummed and warped after the wall is damp.

4. The quality of the wallpaper is not good.

3. Precautions for repairing wallpaper.

1. Before repairing the wallpaper, it is best to use a small amount of water to soften the wallpaper, so that the wallpaper can be glued to the wall through the repair glue.

2. Be sure to choose to use a more environmentally friendly repair glue for repair, otherwise the home will exude a more unpleasant smell, and there will be warping after a long time.

3. You can't directly use scotch tape to repair it in order to save trouble, because the wallpaper repaired by this method is very ugly, and there will be warping in a few days, and the tape on the scotch glue will stick to the wallpaper and be difficult to clean.

Fourth, how to paste wallpaper.

1. Clean the dust on the wall first.

2. Roll the wallpaper bottom film on the wall.

3. According to the specific size of the wall, cut the wallpaper that needs to be pasted, and paint the wallpaper glue on the back of the wallpaper.

4. Paste the wallpaper painted with wallpaper glue on the wall in order from top to bottom.

5. Use a scraper to scrape the wallpaper flat to ensure that there are no bubbles in the wallpaper.