Can underfloor heating be added to the original?

Floor heating can be added on the original basis, but this leads to a narrowing of the ground and roof space, sometimes giving people a feeling of oppression, another two layers of floor heating, if the heating system is better, the temperature in the house will be particularly high in winter, people will be prone to cold in this environment.

No. If you can't do this construction, adding another layer will reduce the height of the house, and once the lower pipe is damaged, the upper pipe will have to be removed and repaired.

If the top floor of your building is high enough, then you can add another layer on the original basis, it doesn't matter, because the house should be very high, and it doesn't seem too short to add a floor, so it doesn't matter, if the top of your house is not high enough, then there is no way, then you can't add it on it, it looks very short, so the house is built high, then it doesn't matter if you add it once, you can continue to use it.

It is completely possible to add another layer to the original floor heating, but it is necessary to deal with the competitors between the partitions to prevent cracking, prevent the ground from collapsing and so on.

Floor heating can be added to the original basis, so that it is still possible, warmer, and the water is more and larger.

It should be floor heating, you can't add another layer on the original basis, it shouldn't work, I think a layer with a layer of words to add a denser layer of pipe cloth a little denser, don't hit too thick on top, it's OK.

If the original one is broken, it's okay!

This is not possible, the floor heating in the house has been covered with floor heating pipes, the destruction of the cement floor will inevitably cause the destruction of the pipes, and the pipe can not be added, you can choose your own heating, with gas wall-hung furnace heating.

Or destroy the original floor heating and resurface it all.

Or add a circulating pump from the return water to force the circulation of water, the effect will be better, but it will affect the heating of other people's homes to some extent.

Kiss! Hello, happy to answer your <>

The method of adding floor heating to the original tiles is as follows: 1. If the ground has been paved with tiles, it is definitely necessary to remove the tiles first, otherwise there is no way to install floor heating. 2. After removing the tiles, you can lay the insulation board.

This acts as a heat preservation and also to prevent heat loss. 3. Next, the reflective film should be laid, which can make the heat conduction evenly, so that the temperature in all parts of the room is about the same. After laying the reflective film, fix it with tape and you can turn it.

4. Then plan and determine the location of floor heating installation, and then lay steel wire mesh according to the location. The steel wire mesh is used to fix the position of the floor heating pipes, which can also prevent the floor heating pipes from sinking into the insulation board. 5. The next most important thing is to start installing the floor heating pipe, which is the part that provides the entire heat for the floor heating.

Be careful not to damage the floor heating pipes during installation, especially at the interface. 6. Finally, install the water collection system, check whether the floor heating work is normal, and then reopen the new ceramic tile to pave it to completion. Hope mine can help you <>

Do you have any other questions?

Summary. Dear, I'm glad to answer for you, can you answer the second layer of floor heating insulation layer; It is not necessary to lay two layers of two slabs, and laying two layers will reduce the geothermal temperature and affect the indoor temperature. A good floor heating can be paved with a layer of insulation board, which not only saves costs, but also improves the temperature, and is beautiful and generous.

The weather is cold in winter, and the tired body is dragged after a day of work, and it is warm and comfortable to go home to a warm home. If you pave too thick, then after you glue the overall floor tiles, the distance between the ground and the roof must be shortened, at least ten centimeters.

Dear, I'm glad to answer for you, can you answer the second layer of floor heating insulation layer; It is not necessary to lay two layers of two boards, and two layers will reduce the geothermal temperature and affect the indoor temperature. A good floor heating can be paved with a layer of insulation board, which not only saves costs, but also improves the temperature, and is beautiful and generous. The weather is cold in winter, and the tired body is dragged after a day of work, and it is warm and comfortable to go home to a warm home.

If you pave too thick, then your overall ground is glued to the tile, the distance between the ground and the roof of the shed, then you have to shorten the width of the town, at least ten centimeters.

There are two floors of floor heating, and the floor tiles are out of shape.

If the floor heating backfill is loose, it has a great impact on the floor tiles.

The mortar is too thick, and a few pieces are added to the bottom in some places, which is bad for the floor tiles.

The mortar is too thick to form a honeycomb in the future.

Q: Is there another layer of floor tiles on top of the floor heating? If not, why?

Hello, I'm sorry to keep you waiting, you can pave the impact is not big, it will affect part of the floor heating, but the impact is not too big, the lower the density of the object The greater the thermal resistance, the higher the density of the product insulation performance of the bottom, the two are conflicting, if you decide to lay the floor, the moisture-proof floor mat under the floor should be used as a special thermal conductive mat for geothermal heat (the mat is attached to the tin foil thermal conductive layer) Now there are fake geothermal floor mats on the market, and the real geothermal special mats are very thin The thickness is less than 1mm Your home must be using a low-temperature radiant floor heating (floor heating) system, first of all, it is necessary to introduce the structure of the floor heating layer, and the bottom layer is laid with a thermal insulation layer to prevent the heat of the floor heating coil from being transferred through the floor to the next layer. The upper layer is the infill layer, and the coil of the floor heating is laid on this layer, and then a screed layer is made, and then the top is your floor layer. If you lay another layer of floor on it, it will definitely increase the thermal resistance of heating hot water to transfer heat to the room, and it will definitely build a hole to imitate the drop of ground surface temperature.

The above is only a theoretical analysis, but the actual floor heating system is better than the traditional radiator heating effect, so the indoor temperature of the floor heating users is generally high.

The landlord is worried that the floor heating effect is not good and wants to encrypt, of course, it is better than using electricity to assist heating. And for central heating, it is impossible to go with a wall-hung boiler.

First of all, eighty square four-way should be enough.

Secondly, if the original design is reasonable, you can add another layer of heat that may cause excessive concentration of heat and unnecessary trouble.

If you really want to strengthen the bedroom, the best way is to bury the pipe in the wall, add a wall to each bedroom, preferably the one with a window, lay it in a range of one meter high (under the window), according to the 250mm spacing is enough, pay attention to the chiseling of the wall and increase the steel bar to support the thicker cement layer, and improve the cement mortar mark. In order to avoid uneven hydration, the wall heating in the two bedrooms can only share one circuit, so that it works.

Or, don't stick to underfloor heating, add a set of beautiful copper-aluminum alloy radiators under the bedroom window, which is the easiest and effective.

The 4 pillars you said mean 4 roads, and I want to change it to 6 roads. Yes, as long as you don't realize that the ground is raised a lot, you can give up the original underground 4 roads, re-pave them, and pave them into 6 roads.

I can add it, and I am also from the Northeast, and we are also not hot.

Can you tell me how to solve it, I have also encountered the same problem, the same more than 80 square meters of four-way pipe feels insufficient.

Summary. This question is divided into two parts:

First, after the geothermal pipe is laid, the surface shall not be at least below the sand and cement layer of centimeters, which is the regulation. In other words, it must be plastered and cannot be directly covered with flooring.

The second is that the floor you lay must be a floor heating floor, otherwise the floor will rise! Hope it helps!

How to do underfloor heating on the ground floor.

This problem is divided into two parts: one is that after the geothermal pipe is laid, the surface shall not be at least a centimeter of sand and cement layer, which is the regulation. In other words, it must be plastered and cannot be directly covered with flooring.

The second is that the floor you lay must be a floor heating floor, otherwise the ground will rise as a greeting board! I hope it can help you build a beard!

Process: 1. In the case of flat ground, first cover all the ground that needs to be paved with a benzene board of about 5mm below. 2. Cover the benzene board with a layer of heat insulation film.

3. Lay geothermal pipes on the heat insulation film. It should be noted here that about 5m of geothermal pipes should be laid per square meter and there should be no joints. The spacing between the tubes should be 20cm.

4. After the geothermal pipe is laid, fill it with an hourglass (that is, the thing saved by sieving sand). 5. Finally, use about 1:5 cement mortar on it to level the eggplant.

Do not calender, otherwise the shadow tremor will call for a heat dissipation effect).