Do you need additional radiators for a centrally heated house?

Radiator. The increase needs to be decided according to the water pressure.

In fact, if you want to add additional radiators to a centrally heated house, you need to go through the water pressure of the house, because the water pressure may be different for each household.

If the water pressure of each Meihe can withstand more radiators, it is actually possible to increase radiatorsIf there are some people whose water pressure cannot withstand more radiators, then it is best not to add more radiators, because if more radiators are added, it will also lead to poor water flow, and the radiators are not too hot. Winter in the north is actually very cold, so the most important thing is to ensure that the radiator is in the hottest state.

Centrally heated houses do not require additional radiators.

The house with central heating is actually already installed, with radiators or heating facilities, and if you move in, you don't need to add another radiator.

Now the house facilities and equipment are actually very complete, especially in the north heating system has been very perfect, so basically it can be said that every household is a house heated by heating facilities and equipment, basically there is no need to add more radiators, of course, some people want to add another radiator, it is necessary to go through the heating company to test before it can be installed.

Central heating of the house is possible to add additional radiators.

In fact, the central heating house can add radiators or replace radiators, because if you feel that the heating in your room is not enough, or the radiators in your home have been used for a long time, you can replace them.

Most areas in the north now have heating facilities, so some homes have radiators that have been used for a very long time. In this case, it is recommended that you first remove the radiator in the home, and then install a new radiator, because if the radiator is used for too long, there will be some aging and corrosion inside. These phenomena will cause the radiator to be no longer so warm, and the long-term old radiator will be prone to water leakage and bursting.

No, because the temperature in the central heating house is enough for your daily activities, if you add radiators, it will cost some more, which is not cost-effective.

No, this is because the central heating house is at a moderate temperature and does not need to add radiators. It's going to feel warm.

I don't think it's necessary, because the house with central heating is already warm enough, and there is no need to add additional radiators, which is a bit of a waste of resources.

Not very needy, because of central heating, the heating must be hot enough, if you add additional radiators, first of all, the space at home will become smaller, and the radiators are not beautiful enough too much and not good-looking.

This is based on your own practical needs, and if you can, of course, you can install additional radiators at home.

No, you don't. The heated house is already very hot, and there is no need to add additional heating equipment, which is a waste of resources.

No, because the heating provided by the central heating is very sufficient, and the house is very tight, so the temperature is enough for people's lives.

I don't think it's necessary. Because central heating is already hot. Therefore, if you add radiators, it is not very recommended.

No. Gas wall-hung boiler radiator and central heating are heating systems with different working principles, therefore, the original gas wall-hung boiler radiator can not be directly connected to central heating.

When the ignition switch of the wall-hung boiler enters the working state, the fan starts first to form a negative pressure difference in the combustion chamber, the wind pressure switch sends the command to the water pump, and after the pump starts, the water flow switch sends the command to the high-pressure discharger, and the command is sent to the gas proportional valve, and the gas proportional valve starts to start.

Due to the existence of negative pressure in the combustion chamber, there is no aggregation and combustion of natural gas, so there will be no deflagration, and the calm ignition is ultra-silent, and the occurrence of dangerous accidents is avoided. Some customers are worried about gas safety because they do not understand the operation control principle of the gas proportional valve of the wall-hung boiler;

The gas proportional valve and the wind pressure switch and the flue gas induction switch are interlocked, and the combustion chamber has a certain negative pressure gas proportional valve to work, when the flue gas induction switch can not detect the exhaust gas discharge in 5 seconds, the gas proportional valve will be cut off to stop the gas supply, so as to ensure the safe use of gas.

The central heating system consists of three parts: heat source, heating pipe network, and heat user. Central heating heat sources include combined heat and power power plants, central boiler rooms, industrial and other waste heat, geothermal, nuclear energy, solar energy, heat pumps, etc., and can also be a multi-source combined heating system composed of several heat sources. The distribution of heat sources should be as centralized and reasonable as possible, and the heat source equipment should be selected with high parameters, large capacity and high efficiency as much as possible.

AbstractThe transformation of floor heating from central heating is the act of dismantling and modifying the heating pipe network without permission, and the losses caused by it shall be borne by the residents and will be punished accordingly. Therefore, in order to avoid disputes, the consent of the property management company must be obtained before the renovation.

Do you need to install your own radiators for central heating?

Hello, I'm inquiring for you here, please wait a minute

Hello, I just bought a new community, but also rice has a delivery, I asked, the sales office said that although it is collective heating, you need to install your own radiators, is this legal?

The transformation of central heating to floor heating is the act of dismantling and modifying the heating pipe network without permission, and the losses caused by it shall be borne by the residents and will be punished accordingly. Therefore, in order to avoid disputes, the consent of the property management company must be obtained before the renovation.

This is not legal and is not allowed.

Is collective heating a developer installing radiators?

Yes, you can't install it yourself.

What if I make an additional fee?

What if I make an additional fee?

Can you sue the developer?

This situation can be sued to them.

Okay, thank you.

You're welcome

The central heating in the north is the unified heating of the municipal government, with the characteristics of high pressure, complex water quality, and inflexible time fixation, so our heating should also be installed in combination with its characteristics. The following 3 principles must be recognized!

1. High pressure.

The heating pipes of all households with central heating are long and wide, so many heating companies will increase the heating pressure to meet the heating standard. At this time, if the pressure of the radiator is not enough, there will be a rupture and water leakage. At present, the bearing pressure of steel heaters is greater than that of copper and aluminum radiators.

When choosing, you can choose a heater with a thick pipe wall.

2. High temperature resistance.

The design standards for most residential heating are basically 80 for water inlet and 60 for backwater. Different regions will have differences, if the water temperature in your own community exceeds 75, you should pay attention to the copper and aluminum heating, because the copper and aluminum radiator is a combination of copper and aluminum, and the long-term high temperature use will loosen and separate, and cannot be heated.

3. Strong adaptability.

The time of central heating is relatively uniform, the heating time is as long as three or four months and can not be changed, and the water quality of the district heating of central heating is complex, so the radiators we install need to have good adaptability to their own heating system, such as corrosion resistance, heat dissipation and so on. In addition to this, it is necessary to pay attention to the quality of the heating, otherwise the inferior heating will not be able to withstand the heating for many years.

For central heating families, the first requirement for the heater is to withstand high pressure, the second is to pass the quality of the heater, and the third is to be able to adapt to the more complex heating environment.

The requirements for radiators in central heating homes are that the radiators must be firm, and at the same time there must be no water leakage, and the radiators must be. The heating effect should be good, so that the radiator can make the family. Feel warmer.

1. High pressure. 2. High temperature resistance. 3. Strong adaptability.

High pressure resistance: The long pipeline of central heating will be large, and the heating area will be larger.

Now it is all floor heating, the floor heating is relatively warm, and the radiator effect is not as good as the floor heating.

Radiators, it can be said that winter heating is more traditional, and it is also the most common way to heat. Industrious and intelligent Chinese people, in the long-term use process, have developed many "wonderful uses".

Precautions for changing heating to radiators.

1. The replacement of radiators should be before decoration and before the heating period. For example, once the central heating enters the heating period, the replacement of radiators will inevitably affect the heating of other users in the system. Of course, there are certain unsafe factors in this way, for example, after the heating is started, there is pressure in the heating pipes, which can easily cause danger if not handled properly.

Also, replacing the radiator should be before the renovation or when the renovation has just begun. Because the radiators are customized products, the order cycle is 20 to 30 days depending on the brand. In addition, the heating should be removed before the wall decoration, and the corresponding position should be determined according to the size of the new heating.

2. According to their own characteristics, different radiators are selected, at present, the more common radiators on the market are mainly steel, aluminum, cast iron, copper-aluminum composite and copper, and the south household heating, the radiators on the market are basically optional; If it is central heating, it is necessary to make a choice according to the water quality of the community, for example, if the water quality has a high alkali content, it is not suitable to use aluminum radiators, steel radiators should be used, and steel radiators should be selected if the oxygen content in the water is large, and steel radiators or aluminum radiators with anti-corrosion treatment should be used in the inner layer. In general, copper-aluminum composite and new cast iron do not have strict requirements for water quality. In addition, it is best to use the same or similar radiator material in each room to avoid corrosion due to electrochemical reactions between different materials.

The installation process of central heating to radiators.

Step 1: Determining the location to save space is obviously the primary purpose of retrofitting radiators. Therefore, the installation position of the radiator must be well designed.

There are three main factors to consider when designing: first, safety, such as hanging radiators are best placed on load-bearing walls; The second is functional, such as the radiator placed under the window can prevent cold radiation and cold air circulation, and when people are close to the cold window, they will not obviously feel the invasion of cold air; There are also furniture factors to consider, such as not fitting radiators near furniture that is afraid of being heated for long periods of time. Step 2:

In the construction of pipelines, safety and airtightness are the key, and attention must be paid to the places where there is no water leakage. In addition, from the difficulty of construction, the heating pipe must be tested for water pressure after the transformation, and there is no problem in the next step, and the radiator can be installed only after the wall latex paint is completed. Step 3:

The radiator system is not a ready-to-use product, but requires a period of verification for consumer durables, so the necessary testing is indispensable. Usually during the installation and construction, the worker will reserve the valve on the pipeline, and the stamping test should be carried out after installation to prove that there is no running, rising, dripping and leaking place before it can be connected with the original heating pipe. There is a certain risk of changing from central heating to radiators, and if conditions allow, it will be better to reinstall a separate radiator heating system.

Heat high fever is also thought to be the range of Retreitt Furen Wenteritt try natural teeth two too hot Te thought people.

The radiator is a magical existence, and it can be said that almost everyone can not leave it in winter, especially in the north. What are the requirements for radiators for central heating? The following is followed by Jin Jin.

Home heating installation - first understand the heating water quality before installation China's heating conditions are more complex, the heating water quality is different, the suitable use of home radiators is different, if the water quality in the water is high in oxygen, the home is not suitable for the installation of general steel home radiators, but should use copper and aluminum composite or have done internal anti-corrosion treatment of home radiators,

Precautions for the selection of central heating radiators: Steel radiators are a new type of radiators, which are also outstanding in environmental protection, but the requirements for the process are particularly strict, and the general small manufacturers do not have the production technology mixed in.

There are wires at the top of the pole on the side of the road, so is there any wire inside the cement pillar and what is the internal structure?

Central heating is something to do in the northern region in November every year, but because some buildings are bought and invested by others, so no one lives in the central heating home and needs to be closed, which has become the focus of everyone's discussion after dinner.

Vary. Whether the radiator used for central heating is a lot of curiosity, but that's because each place is different, so there is no specific answer to this. However, whether it is a radiator or water floor heating, the heat source is generally at the bottom of the room, after the air is heated, the temperature rises, the air density decreases, the hot air will naturally rise, the surrounding cold air comes to supplement, and then rises after heating, so that the indoor air circulates naturally, and the whole room will be warm.

No. After all, compared with radiators, floor heating is not a star and a half, but in the past, central heating can not be changed to floor heating, mainly because the pipe of the floor heating itself is relatively long, and there will be a certain water resistance, if the floor heating is changed, it is likely to affect the heating effect of other households. Therefore, you can't change it at will, if you want to change it, you need to ask the developer or the property.

After the company's approval, it also depends on whether it meets the requirements of the transformation.

Why can central heating not be changed to floor heating is a lot of friends are asking, on the past data to see that our country prohibits, privately dismantling and changing the heating pipe network, the loss caused by the household bears, and will be punished accordingly. Therefore, in order to avoid disputes, the consent of the property management company must be obtained before the renovation. Due to the long pipeline of floor heating and the high water resistance, it will have a certain impact on the central heating system and affect the heating of other residents, and the property management company may not approve it, and it is best to negotiate with the developer when buying a house.

The process itself is not very logical.