-
Soak the jadeite in water correctly, the consequences of the jadeite soaking in water are not serious, on the contrary, it also plays a good role in maintenance.
Jadeite needs to be cleaned regularly to keep it shiny and vibrant. If you don't wear it for a long time, you also need to regularly hydrate the jadeite, you can soak it in pure water for an hour or two, and then take it out and wipe it clean with a dry soft cloth. Be careful not to soak for too long.
Jadeite does not wear for a long time will indeed lead to the loss of its internal water, and eventually affect the head and the color of the jadeite, to soak the jadeite in the water to absorb water, but it is best to use pure water, do not use tap water, because the chlorine in the tap water will slowly erode the surface of the jadeite, for a long time, will make the quality of the jadeite bracelet worse.
The tap water used today is disinfected by the water plant, which contains disinfectant elements. If it is said that the jadeite bracelet is soaked in such water for a long time, it is obvious that it will have a certain impact on the jadeite. The color, condition, and even transparency of the corresponding jadeite bracelet will change, and there is a saying that "jadeite soaking in water has serious consequences".
There is mountain spring water. Soaking, that is naturally the best, will not affect the jadeite, but also fully ensure the head of the jade bracelet, is a good choice, no mountain spring water can choose pure water.
-
The color and condition of the jadeite bracelet and even the transparency can change.
Whether you wear it for a long time or infrequently, you should wash it regularly. Just wash it with clean water and wipe it clean with a towel with good water absorption. Or put it in a cool, dry place to dry.
But it's best not to soak it in hot water for a long time, even if it's just about 37 degrees, it's not a good choice. Hot water can burn the natural composition of the jade bracelet, affecting its luster and moisture.
-
Jadeite can be soaked in water, so can you wear it in the bath?
-
Please refer to below.
Jadeite soaking in water is also one of the ways to maintain jadeite. The main purpose of soaking jadeite in water is to give jadeite a moist environment and maintain the moisture and luster of jadeite. The water head is the characteristic of jadeite, and the jadeite that lacks water looks dry, lifeless, and not so moist.
What are the benefits of jadeite soaking in water.
The human body has such fine pores, jadeite as jade, as a mixture of a variety of minerals, how can there be no gaps in its joints, so a long time of soaking in water is enough to make water molecules.
Enter the inside of the jadeite. The biggest purpose of soaking in water is naturally to maintain the quality of jadeite, but water also has a great effect on the appearance of jadeite, making the surface of jadeite more moist, the water head is more sufficient, and the color will be more vivid. However, it is worth noting that the quality of jadeite determines the size of jadeite pores, the better the quality, the greater the density, the smaller the gap, so the longer the need to soak in water, on the contrary, the better the quality, there is no need to soak for so long, but because the pores are large, it is also easier to lose water, so low-quality jadeite should often be soaked in water.
Precautions for soaking jadeite in water.
1. Do not soak in tap water. Because the chlorine in the tap water will gradually corrode the surface of the jadeite bracelet, and soaking for a long time will make the quality of the jadeite deteriorate and affect the wearing effect, so it is best to choose the best bottled pure water on the market to soak the jadeite.
2. When soaking in water, pay attention to choosing a place with moderate temperature and humidity when choosing a place, so as not to inadvertently destroy the beauty of jadeite and jade.
3. If the jadeite is not worn for a long time, the moisture inside the jadeite will be lost, affecting its beauty. Immersing the jadeite in water can replenish water to a certain extent and keep the jadeite hydrated. However, this method is effective for the bean seeds.
The effect of waxy jadeite is more obvious, because the internal structure of these two jadeites is relatively loose, and water molecules are often easier to enter the jadeite jadeite, so as to replenish water and make the jadeite look moist and moving. However, for jadeite with delicate texture and dense structure, such as ice jadeite and glass jadeite.
It is difficult for water molecules to enter the jadeite, so soaking in water does not have much effect.
4. To replenish water to the jadeite by soaking in water, it does not need to be soaked in water for a long time, as long as it is not worn, it is enough to soak it for one to two hours, and then take it out and wipe it clean with a dry soft cloth.
5. Jadeite soaking water is generally soaked before cleaning jadeite. Before cleaning, soak the jadeite in clean water for about 30 minutes, and then rinse the surface of the jadeite with a small soft brush to clean the stains on the surface of the jadeite. In this process, you must not use too much force to prevent the jadeite from being pressed and cracked, and then dry it with a clean soft cloth.
-
Jadeite with water blister, will be more moisturized, play a protective role, jadeite can not be dry bath for a long time.
-
Jadeite blisters will keep jadeite jade will not lack water, which can effectively represent the original appearance of jade's water color.
Jadeite jade, especially the finished product, due to the lack of protection of jadeite skin, natural storage will lose water, the jadeite soaked in water, can solve the problem of jadeite water loss.
-
It didn't work, but it looked wet at the time, and it was still the same afterward.
-
Generally speaking, jadeite is afraid of high temperature exposure, and boiling water may cause the swelling and cracking of jadeite, which has a great impact on the quality of jadeite. Therefore, it is generally not recommended to wear jadeite when washing and sweating.
If the jadeite is released into the water for a long time, it will irreversibly change its jade quality. The volume of its internal molecules increases, which affects the change of jade quality, resulting in the loss of water from jadeite, and the germplasm will dry out, and even its color will become lighter.
Do not soak in tap water. Because the chlorine in the tap water will gradually corrode the surface of the jadeite bracelet, soaking for a long time will make the quality of the jadeite deteriorate, affecting the wearing effect of the blue type, so it is best to choose the best bottled pure water on the market to soak the jadeite.
-
What will be the effect of jadeite blistering?
Kiss, jadeite soaked in water has the benefits of keeping clean, increasing translucency, and replenishing moisture. As jade, jadeite is a mixture of a variety of minerals, and there are gaps in its joints, and soaking in water can make water molecules enter the inside of jadeite, so as to keep the water moisturized of jadeite, increase the transparency of jadeite, and replenish water. <>
-
1. Cotton in jadeite.
The cotton in the jadeite is a kind of flocculent, and the better the water of the jadeite, the more obvious the cotton inside will be. The cotton in the jadeite is one of the important criteria for judging the quality of the jadeite, under the illumination of the light, you can see some crystal particles similar to cotton wool, these cotton wool is called cotton in the jadeite industry, and there will be these cotton wool in the natural jadeite. The shape of the cotton in different qualities of jadeite is also different, and most of the cotton is clumpy, short columnar, and fine-lined, and there are various forms of distribution.
The more obvious the cotton in the jadeite, the more evenly distributed, and the final value of the translucent is relatively high. The cotton in the jadeite, due to the different thickness will also directly affect the jadeite, if the cotton wool inside is very messy and looks uneven, this will also reduce the quality of the jadeite.
Second, the identification of cotton.
Asbestos is a part of jadeite, and many jadeites contain asbestos inside, and some jadeite can be seen in the white surface of clumps or thoughts, which are composed of white minerals. Because jadeite contains mineral particles and inclusions of impurities, it will have a reflective effect on light. If you don't see obvious cotton on the surface of the jadeite, you can look against the strong light backlight, you can see the shape of the cotton wool inside, if it is not transparent at all, it proves that the jadeite in your hand is fake.
Pure natural jadeite will contain cotton, which you can observe with a magnifying glass or microscope.
When wearing jadeite, you must pay attention to stay away from oily fumes, because jadeite is very taboo about these oily fumes. When wearing jadeite, you should not come into contact with the liquid of some wall tiles, which will destroy the overall structure of jadeite and its color.
-
Rinse with clean water. After the jadeite is soaked in salt water, it may make its texture worse and worse, and the liquid celery will not outweigh the losses. Because the salt water contains a large number of chloride ions, chloride ions are corrosive, which is not good for the jadeite itself, and it is easy to destroy the structure of the jadeite.
If you just want to clean jadeite jewelry, then it is recommended to use clean water.
Jadeite in daily wear is often hydrated, the method of hydration is to directly soak the jadeite in the water for a week, and change the water once a day, the frequency of hydration is once a year, after the internal water of the jadeite is replenished, you can maintain the luster of moisture. Sell search.
Jadeite can generally be soaked in pure water, soak the jadeite in water, add a little salt into it, put it for a week, how to deal with the blisters in the jadeite bracelet, take it out, wipe it clean and put it away. Regular soaking of jadeite can make jadeite more shiny.
Ground color: also known as "base" color, which means background color, refers to other colors other than green, such as different shades of white, oil color, lotus root powder, gray, etc.; >>>More
Glutinous is a term in the jewelry industry, waxy refers to the delicacy of jadeite jade, species refers to the texture of jadeite jade materials, jadeite texture is fine that is, the species is older or older, and the jadeite texture crystal is coarse and loose, which is called tender. Because jadeite jade is a combination of polycrystals, it is vividly divided into glass species, ice species, egg white species, glutinous species, bean species, etc. - Encyclopedia >>>More
Jadeite crystal pattern refers to the stone pattern on the crystal of jadeite. Stone grain refers to the small voids formed by the insufficient bond between the jadeite crystals, and such small voids are arranged in a linear or knife-like structure. If such tiny voids are arranged together in a clump or cloud, they become so-called "white cotton". >>>More
We all think that jadeite will become greener and greener, and the more it is bred, the better it looks, but some of them turn yellow after wearing it for a long time, this is because the jadeite variety, the jadeite variant is a relatively normal phenomenon, which is also a natural phenomenon. >>>More
After level 70, the 50-level planting skill can plant the rubber, but it hasn't come out yet.