The mobile phone is connected to the Bluetooth speaker, and it can t be connected

If your phone cannot connect to other devices with Bluetooth function, we recommend that you:

2.Check to see if the Bluetooth visible mode in your phone is turned on.

3.If you are prompted to enter a password during pairing, please check whether the Bluetooth password entered is correct.

4.If you still can't pair and connect, it is recommended to try to change to another device with Bluetooth function, which may be due to the compatibility of the Bluetooth version.

First find the pendant button next to your Bluetooth headset and hold this button for about 6

In 7 seconds, the indicator next to it will be always on, which is when you turn on the Bluetooth function of your phone, and start searching for a new Bluetooth match just like we usually search for Bluetooth phones. Generally, it will not take long to receive a Bluetooth device near you, and prepare to connect according to the Bluetooth matching settings you found.

If you find a Bluetooth headset device and then connect it, here is a word to talk about. When connecting, you generally have to enter the password, according to different manufacturers of the factory password is generally not the same, most of the manufacturers of the factory access password is generally 0000, four zeros. If this password is incorrect, you can take a look at your instruction manual, which is all on it.

It's ready to go.

The phone can't connect to the Bluetooth speaker, what's going on, hello pro 1, system problems cause inability to connect. 2. The Bluetooth speaker is set incorrectly. The solution is as follows:

The mobile phone or tablet can search for the Bluetooth speaker, but it prompts that it cannot be connected after selecting it. Connect the Bluetooth speaker to other devices and see if there is a problem with the speaker. (1) Check whether you have recently installed Bluetooth software, if so, it is recommended to uninstall it.

2) Factory reset your phone. (3) Re-flash your phone. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress.

Finally, I wish you good health and a good mood!

Reasons why the mobile phone can't connect to the Bluetooth speaker: 1. Check whether the password entered when the Bluetooth speaker is connected to the mobile phone is correct, and you can change the password before connecting.

2. One of the mobile phones or Bluetooth speakers has not turned on the Bluetooth function.

3. The distance between the mobile phone and the Bluetooth speaker is too far, and the general effective distance is within 10 meters.

The steps for connecting the Bluetooth speaker to the mobile phone are as follows: 1. Turn on the Bluetooth function of the Bluetooth speaker and the mobile phone.

3. Click to connect, after the connection is successful, the connection will be displayed on the phone.

4. If the Bluetooth device is not successfully connected, you can let the mobile phone play the song to check whether it is successfully connected.

The solution to the Bluetooth on the mobile phone cannot be turned on: 1. Restart the phone or restore the factory settings, and then try to turn on the Bluetooth after turning it on.

2. Upgrade the mobile phone system to the latest version to prevent Bluetooth from being turned on due to system bugs.

4. Apply for after-sales maintenance from the mobile phone manufacturer.

The phone can't connect to the Bluetooth speaker, what's going on, hello dear, the Bluetooth speaker and the mobile phone can't be connected may be because: Bluetooth is not turned on, and the pairing is not successful. There is a problem with the device.

The connection method of the Bluetooth speaker is generally as follows: press the power button for more than 5 seconds in the state of shutdown until the red and blue lights flash alternately; Enter the pairing state, then turn on the Bluetooth of the phone, search for the Bluetooth device, find the corresponding device name, and pair and connect. Generally, after the pairing connection is successful, as long as you turn on the mobile phone, you can use the Bluetooth speaker to listen.

The reason why the Bluetooth speaker can't connect to the phone.

1,First of all, there is no configuration,If it is a newly bought Bluetooth speaker,The first time you use it, you need to configure it with your mobile phone,To open the Bluetooth speaker,Then the mobile phone searches for matching。 (as shown in the image below).

2. The second reason is that the Bluetooth function of the phone is not turned on. In the phone's settings page, there is a Bluetooth function inside Nianshan. Click on it and open it to connect. (as shown in the image below).

3. The third reason is that some Bluetooth needs to set a password, if you set the password the same as the input in the circle, you can't connect at this time. (as shown in the image below).

4. The fourth reason for the first chamber sail is that the mobile phone is out of battery, and of course it cannot be connected to the Bluetooth speaker. (as shown in the image below).

Precautions for Bluetooth speakers not connecting to mobile phones:

1. Reconnect, the mobile phone and speaker should be within 10 meters to be effective.

3. The Bluetooth and speaker of the mobile phone will enter the matching state, click to confirm the connection. <>

The Bluetooth speaker can't be connected, there are many reasons:

1. The Bluetooth speaker has not entered the matching state, it is recommended to press and hold the Bluetooth speaker switch for about 5 seconds, and then try to connect when the Bluetooth indicator is flashing;

2. If the Bluetooth mode in the mobile phone is not turned on the "open detection" function, enter the Bluetooth of the mobile phone, turn on this function, and try again;

3. The distance between the Bluetooth speaker and the device to be connected is too far, and it is recommended to connect within 10m.

So what is the correct way to connect a Bluetooth speaker? How does it work?

The Bluetooth speaker is connected to the computer.

First of all, check whether the computer has Bluetooth function, and if so, turn it on;

Then connect the Bluetooth speaker to the power supply, and press and hold the switch for about 5 seconds or more, and wait for the Bluetooth indicator to flash;

Then click on the Bluetooth function of the computer, find the name of the Bluetooth speaker, and click to connect.

The Bluetooth speaker is connected to the mobile phone.

First of all, plug in the Bluetooth speaker;

Then connect the Bluetooth speaker to the power supply, and press and hold the switch for about 5 seconds or more, and wait for the Bluetooth indicator to flash;

Then turn on the Bluetooth of the mobile phone, find the Bluetooth speaker name in the Bluetooth, and click to pair and connect;

Until you hear the Bluetooth speaker make a "beep" sound, it means that the connection is successful.