The house in the Northeast is going to be heated and filled with water, and there is no way to go ho

Hello, I'm glad to answer for you.

If you are not at home, the floor heating leakage is relatively large, your downstairs will give you a **, even if it does not leak downstairs, there will be water leakage out of the security door of your home, and it will not be trapped in the house.

Dear, the steps are as follows: 1. Close the valve and the underground heating pipe leakage problem, we must first turn off the heating gate and heating main valve at home, so as to avoid the heating pipe has been flooding, and the leakage of the heating pipe will be reduced. 2. Find the leakage point, the heating pipe is buried underground, and you can use the leak detector to determine the specific leakage point. You can roughly judge the scope of the leakage according to the water stain of the leakage, and then move the leak meter along the direction of the heating pipe to listen carefully to whether there is a water leakage sound, and the sound of the leakage point of the general pipe is the largest.

Once the leak is identified, we mark it on the ground. 3. For pipeline maintenance, we use cutting machines, electric drills and other tools to remove the tiles at the mark of the leakage point on the ground, and knock off the concrete, so that you can see the leaking heating pipes. When removing the tiles, we try not to destroy them.

If the heating duct only has a hole the size of a pinhole, we can repair it with a PPR repair stick. If the heating pipe is broken, we can cut off the broken section of the pipe and install a new heating pipe by hot melt connection. When repairing heating pipes, we try to minimize the amount of replacement and avoid excessive repair costs.

4. After the ground repair heating pipe is repaired, we can conduct a pressure test to check whether the heating pipe will leak. After the acceptance of the heating pipe, we will re-lay the tiles at the leakage point, and choose the same color and style of the tiles as the original tiles.

First, the quality of the pipe. First of all, it is necessary to start from the reason for the pipe itself, with the development and prosperity of the floor heating industry, individual businesses in the industry indiscriminately fill the number, sell inferior heating pipes, and seek huge profits. The raw materials of inferior PE-RT floor heating pipes are impure, the processing accuracy is poor, and the service life of the later stage is not guaranteed once used.

Second, construction damage. Due to the lack of industry supervision, the construction quality of various floor heating companies is uneven, and individual construction personnel do not follow the requirements of industry norms, such as barbaric construction, not careful and rough construction when installing floor heating, resulting in damage and damage to floor heating pipes, and no pressure test is done after the construction is completed, which lays a hidden danger for the owner to use floor heating in the later stage.

3. Decoration damage. After the installation of floor heating, although the pressure test was done, there was no attention in the subsequent decoration process, and the decoration personnel hit nails and drilled holes on the ground where floor heating was installed, resulting in the rupture of floor heating pipes, which is not uncommon.