Where is the best place to install a water heater? Do you know?

Installed on the balcony is the best. Of course, I know that placing it on the balcony can avoid the effects of high temperatures, and it can also avoid being exposed to a humid environment, which can make the water heater work better and also prevent the water heater**.

can be installed on the balcony. The temperature of the balcony is relatively low and the humidity is just right, which will not affect the water heater and will not cause damage to the water heater's wiring.

When installing a water heater in a home, the water heater should be installed in the bathroom to suit your own place, and the height of the water heater should be adjusted according to your height.

For domestic water heaters, many friends are directly installed in the kitchen or bathroom. This means that many friends know that water heaters can only be installed in the kitchen or bathroom. Actually, you can try something else.

Because we have limited space in the kitchen or toilet after all, and water heaters installed in these locations are too close to our bodies when used, which is unsafe.

<> so Jiatanjun recommends the following plans to everyone. When we choose the installation location of the water heater, the first thing to consider is the installation space. The most important thing here is to make the right use of space and not waste it.

Another important issue to consider is the safety of use. From the perspective of safety, we should ensure that the water heater is actually as far away from our body as possible when it is installed, but the location is relatively safe. Personally, I think that the installation location of the water heater should first choose the balcony.

It effectively prevents the influence of moisture on the water heater, and can also play a role in beautifying the space.

Water heaters are common electrical products in the home. On rainy days, solar energy cannot provide hot water, so you can use a water heater to provide hot water for bathing. The most common water heater is installed in the toilet, but there are also different positions to choose from when installed in the toilet, first of all, it can be installed outside the shower room, because the water heater needs a plug, and it can be installed outside the shower room to quickly deliver hot water, and it will not be poured by the water, ensuring safety.

If the bathroom space is large enough, you can install the water heater above the ceiling. Such an installation can not only effectively prevent the water heater from getting wet, but also play a role in beautifying the space.

Do a detailed explanation of the problem for a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me more, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, the like is the biggest help to me, thank you.

The water heater should be installed in the bathroom. To determine the appropriate location, pay attention to the laying of water pipes when installing the water heater, and then it should also be closer to the location of the floor drain, because this can avoid water seepage or leakage.

It is better to install a water heater in the bathroom. It should be determined according to the overall home decoration style and area, and should be installed close to the location of the floor drain, so that it is easier to get into the water and is not easy to be blocked or leaked.

When installing a water heater, try to install the water heater in the bathroom, so that it will be very convenient to use water, or you can choose to connect a water cable to the kitchen, and the overall effect is also better.

It should be installed in the bathroom, because this can ensure the installation of the water heater, will not affect the overall aesthetics, and facilitate the use of the water heater.

<> install an electric water heater in a separate shower area to save space.

Or it can be installed on the ceiling, which is damp-free and beautiful.

Installed outside the shower room, it can effectively block the fog, so as to effectively ensure the safety of bathing and the service life of the electric water heater.

Also, the balcony is a great location.

This answer applies to most brands of water heater models such as Midea, Haier, Wanhe, etc.

Point 1: This water heater is best placed next to the kitchen, which is more convenient, and it is also very convenient to wash dishes, point 2 can also be installed behind the refrigerator, so that it is hidden, it looks less messy, point 3 can also be installed on this wall in the bathroom, which is also a good location.

The water heater is recommended to be installed on the wall outside the shower, so that the electric water heater has a certain distance from the shower area, which prevents the damage of the fog in the shower room to the electric water heater and prolongs the service life of the electric water heater.

The electric water heater does not take up much space and can be hung on the wall, which is required for the circuit; The specific energy of the gas is low but occupies a large area, which has potential safety hazards, and the water heater of the gas needs to be installed in separate rooms.

It is generally better for electric water heaters to be installed close to the water point, so it is best to install electric water heaters in bathrooms and toilets, and it is best not to be too close to the bath bomb when installing.

The electric water heater outlet is best installed at the hot water outlet of the water heater. The water outlet is the most direct installation on the hot water outlet pipe, as long as the hot water outlet pipe is cut off, the electrical appliance will work. If it is installed on the tap water inlet pipeline, in addition to the power can be cut off when the hot water is used, the power will also be cut off when the water heater is filled with tap water, which is not required for actual use.

Six features

Safe. Because it is not heated directly by electric heating elements, it eliminates the potential safety hazard of leakage compared to electric water heaters; Compared with gas water heaters, there are no safety hazards such as gas leakage or carbon monoxide poisoning, so they have better safety performance.

Comfortable. The air source heat pump water heater is regenerative type, and the heating function is automatically activated according to the temperature in the water tank to ensure that the hot water is sufficient for 24 hours**, so there will be no problem that gas water heaters cannot meet the hot water needs of multiple faucets at the same time.

There will also be no problem that the capacity of the electric water heater is small and many people need to wait for a bath. Ready-to-use hot water, large water output, stable water temperature, meet all your hot water expectations.

Save money. Since its electricity consumption is only a quarter of that of an equivalent electric water heater, which is equivalent to using the same amount of hot water, using an air source heat pump water heater requires only a quarter of the electricity cost of electric heating.

For a family of 4 people, the normal hot water consumption is about 200l days, and the electricity bill is about 4 yuan a day for heating with an electric water heater, while the air source heat pump water heater only needs about 1 yuan a day, which can save about 1,000 yuan a year.

Green and environmentally friendly. Gas water heaters heat hot water by burning combustible gas, while emitting a large amount of carbon dioxide, sulfur dioxide and other harmful exhaust gases. The air source heat pump water heater only transfers the heat in the surrounding air to the water, completely achieves zero emission, and has almost no impact on the environment, which is a real environmentally friendly water heater.

Low-carbon fashion. Today, when energy conservation and emission reduction have become the trend of the times, saving energy and reducing carbon emissions are the most fashionable way of life. As mentioned earlier, air source heat pump water heaters use the reverse Carnot principle, which transfers the energy in the air to the water, rather than directly heating with an electric heating element.

Therefore, its energy efficiency can reach 4 times that of electric water heaters, that is, heating the same amount of hot water, the power consumption is equivalent to a quarter of that of electric water heaters, which greatly saves electricity consumption. 70% of China's electricity is generated by burning coal in coal-fired power plants, and saving electricity means reducing carbon emissions.

Intelligent control. The unit is controlled by a microcomputer and runs automatically, and automatically starts and stops according to the water temperature of the water tank and the user's water consumption, without the need for special personnel on duty.

The above content reference: Encyclopedia - Water Heater

Gas water heaters are generally installed at the door of the bathroom, which is more convenient to use, and at the same time, in order to be used separately from the gas used in the kitchen, it can avoid the trouble of frequent inflated hail. It is also important to note that the gas water heater should be installed in a well-ventilated place, away from power supply, electrical appliances and other equipment to avoid open flame accidents.

If you are using natural gas at home, it is best to install the gas water heater on the wall above the gas stove, so that the pipeline connecting the natural gas is relatively short, but this location is easy to accumulate oil, causing the gas water heater pipe to be blocked. When installing in this location, the gas water heater needs to be cleaned frequently.

1. The gas water heater uses high-end technology to monitor the water air cushion, which can ensure that the water temperature is constant for a long time. When the open flame is ignited, screw the ignition button of the air valve to the open position, turn the water temperature control button to the low position, open the cold water valve and the hot water valve, the main burner will burn automatically, and the hot water can be used after a few seconds.

2. The temperature of the gas water heater is determined by the size of the fire and the size of the water, when the water is relatively large, the temperature of the water will be lower, and the temperature is relatively high, so as long as the function conversion button is used flexibly, the ideal temperature of hot water can be obtained.

3. When you stop using the gas water heater, close the cold water valve first, screw the ignition button of the gas valve to the closed position, and finally turn off the main switch of the gas source.

Today I would like to share with you a water heater.

First of all, how to choose a suitable water heater?

This time, Amway's product is our master's little flower: Fangtai's high-rise wind-resistant PRO series gas water heater, which has been on the market for just a few months, and has sold a total of 1w+ in all channels, Seeing this name, I believe everyone has guessed that the high-rise wind resistance of this gas water heater is great, after all, "PRO" is not added casually.

cPrecise temperature control, the water temperature is more stable and quiet.

China is a vast country with obvious changes in the four seasons. Fotile 13L gas water heater has a 4, 7, 11 three-stage intelligent fire discharge design, to achieve accurate temperature control of 1° C, so that everyone can open the appropriate temperature in spring, summer, autumn and winter, and take a bath is no longer afraid of cold and heat.

2.Intelligent black technology, strong wind does not go out.

This gas water heater adopts a DC inverter fan, with small inertia and high speed, so that the oxygen supply is sufficient and the combustion is sufficient, and the fan speed is adjusted with the wind pressure to ensure that the strong wind does not go out.

3.The heating rate is fast, and the hot water does not wait.

Broadband heat exchange technology is a patent of Fotile, and the main function of this technology is to make the gas water heater heating faster and save energy consumption.

4.The water tank is made of good material and has a long service life.

Most of China's waterworks are chlorine sterilized, and in chloride-rich water, we need to pay attention to the corrosion resistance of the product. Fotile gas water heater uses a phosphorus deoxidized copper water tank, which has better corrosion resistance than stainless steel.

Safety protection, more peace of mind to use.

From the 9-fold self-test at start-up, to the 23-fold protection in use, and finally the self-cleaning after use, the whole process of protection in use ensures the safety of you and your family. There is also a 50°C anti-scald safety lock, which continues to rotate for 20s after use, and discharges exhaust gas and CO to the outdoors and other multi-dimensional safety upgrades. In the end, it seems that I forgot to tell you the model of this series of water heaters, one kitchen and two bathrooms to buy d13e1 d13f1 is right, okay, okay, I know that some small sweet potatoes must be a kitchen and multiple bathrooms at home, at this time it is good to start with d16e1 d16f1, don't hesitate, hesitate and lose!

There are recommendations, and the more recommended is the Haier water heater, which is more reliable in terms of quality, and it is also suitable for use in the family.

Midea water heater is more recommended, the reason is that the capacity is relatively large, and it is also more in line with our income.

Rinnai, Haier, Nengsu, Midea, Smith, these brands of electric water heaters are good.