How to tear off the sticker sticker on the carton?

Principle: Because the label stickers are basically made of self-adhesive as the adhesive material, when it encounters heat, the adhesion of the glue will be relatively low, and it can be easily torn off.

1. First of all, there must be a hair dryer, the power does not affect it, as long as it can blow hot air. In order to achieve the effect, here is a logistics label sticker.

2. Then stick the logistics label sticker on top of a carton and press it by hand to make the label completely attached to the carton.

3. Then use a hair dryer to blow on the label sticker for about 10 seconds, so that the sticker is a little hot, and you can gently tear off the label sticker (some stickers are relatively tight, you can blow a corner first, then tear a hole with a blade and then slowly blow other parts to heat up, and finally remove it completely).

Precautions. 1. Don't use too much force when tearing, and make sure that all positions are heated.

2. When using this method, determine whether it is suitable for the label and the item.

Use a hair dryer to blow on the sticker for about 10 seconds to make the sticker a little hot, and then you can gently tear off the sticker (some stickers are tighter, you can blow a corner first, then use a blade to tear a hole and then slowly blow other parts to heat up, and finally remove it completely).

Don't tear it too hard and make sure it's heated in all areas.

Use. Blow dryer. Handful. Stickers.

The glue on it is heated, blown soft, and can be torn off.

Nowadays, it is very popular to use self-adhesive to make various labels such as goods, but removing self-adhesive generally leaves traces, which are difficult to remove. This can be done in the following way:

1.First, tear off the self-adhesive decorations attached to the glass or the surface of the product, soak the towel with warm water (hot water should be used in winter), and wipe twice on the self-adhesive traces; Then use a warm and moist towel to soap and wipe the marks several times; Finally, wipe off the soap foam with a clean, warm, damp towel.

2.These stickers can be easily and thoroughly removed by using alcohol, gasoline, or nail polish dilutions stored at home. At the same time, hand cream can also achieve the effect of removing self-adhesive, I didn't expect it!

Principle: Through expert interviews, we learned that the glue that is generally used for labeling is in.

In the field of chemistry, organic polymer compounds are all organic polymer compounds, and alcohol, gasoline, or nail polish dilutions are organic solvents that can dissolve polymer compounds, and nail polish dilutions have stronger solubility than alcohol and gasoline.

Hand cream contains a lot of water (usually more than 70%), and at the same time, it contains a certain amount of surfactant. The surfactant has good wetting, penetration and dissolution ability, which can quickly penetrate between the self-adhesive and the surface of the object, effectively reducing the adhesion between them, so that the residual self-adhesive can be easily removed.

Blow the hot self-adhesive by blowing the hair dryer and peel it off. If there is any residue, it can be wiped off with a gasoline cloth.

Here are a few ways to search, you can try, if there is a film on the carton will be more convenient.

1. A hair dryer.

For the self-adhesive on plastic products, you can use the hot setting of the hair dryer to blow the self-adhesive hot, and then slowly tear it off.

2. Eraser. For some residual self-adhesive traces on the surface, you can also eraser it, and then remove the hairiness left by the eraser.

3. Lemon juice.

If these stickers get on the **, you can use lemon juice to remove them.

4. Hand cream.

Hand cream can also achieve the effect of removing self-adhesive, because hand cream contains a lot of water, which in turn contains a certain amount of surfactant. This surfactant has good wetting, penetration and dissolution ability, and can quickly penetrate between the self-adhesive and the surface of the object, so as to achieve the purpose of removal. Some similar products, such as creams, facial cleansers, and detergents, also have some effects.

5. Nail polish remover and alcohol.

To deal with sticker marks on hard surfaces, such as stainless steel basins or glassware, we can peel off the label and apply a non-grease nail polish remover to the surface, then gently wipe it with a soft cloth. These traces can also be removed with industrial alcohol or gasoline.

6. Cool oil.

Cool oil is also effective for removing self-adhesive, soak the wind oil essence with the self-adhesive traces, and then wipe it with a clean cotton cloth, and the self-adhesive can fall off.

7. Hot water. Soak the towel with hot water first, then wipe the self-adhesive traces repeatedly, then dip the wet towel in soap, wipe the traces repeatedly, and finally wipe the soap foam with a clean warm and humid towel.

8. Trim directly.

If there is stubborn self-adhesive on the carpet, then you can carefully trim off the self-adhesive traces on the top of the carpet fluff without affecting the quality of the carpet.

You try it with a hair dryer first.

First of all, look at whether you have a layer of PP on the carton, the normal carton sticks sticky on the normal is impossible to move it again, if you tear the carton will be destroyed, the above friends said that this box is definitely not paper, the best way is to directly continue to use strong adhesive destructive sticker directly glued on, so that it will not affect the use of the box, will not damage the box.

Mr. Zhang, Shanghai Xinken Printing Business Division.

Self-adhesive is dipped in water and then blown dry, there is a self-adhesive cleaner, you can also try. Ali Wangwang came to me: The king can't be 5918

As far as I know, the more practical method is to use industrial blowing heating, grasp the time, and then you can continue to glue back, and pay attention to the humidity of the warehouse when storing. After standing, please stack and press the non-stick glue for at least 24 hours, during which time do not ventilate the cartons. The top layers should be pressed with a heavy object.

If the fixed text and image content can be added when making a carton, if it is not fixed, it will be covered with transparent glue, and it is not a number method!

Self-adhesive is not very good, or it takes too long, and there is really no way. This is inevitable.

This one is hard to deal with. It's best to print it on the carton. This will be a little more permanent.

Please use a hair dryer to blow it hot before you remove it, it should be easy. If you don't want to leave a trace, soak it in alcohol and then peel it off.

Logistics companies are required to use movable self-adhesive (tearable), and ordinary self-adhesive will have traces when torn.

Heat it with a hair dryer and blow it.

Try it with an eraser. You can also try to blow the label with a hair dryer, and the glue will melt and loosen after heating.

After heating with a hair dryer, it can be removed.

Cover the carton with a dry towel and then iron it a few times with an electric iron, and the label will come off automatically. If there is a label on the paper, you can put it in the printer, and then use word or other software to print a blank document on the paper with a label, and the label will automatically fall off.

Preparation: Hair dryer

Wind one treatment: du

1. Prepare the carton DAO to tear off the sticker.

2. Prepare an electric app.

version of the hair dryer. Right. 3. Turn on the hair dryer, select the hot air button, and heat it for 30-60 seconds at the place where there is a sticker.

4. Then pry up the corner of the sticker with your hands, and then slowly tear it off.

5. Tear off all the stickers in the same way, and the stickers and cartons can remain intact without damage.

Use a hair dryer against the sticker.

Blow for about 10 seconds to make the sticker a little hot, and then you can gently tear off the sticker (some stickers are relatively tight, you can blow a corner first, then tear a hole with a blade and then slowly blow the other parts to heat up, and finally remove it completely).

Don't tear it too hard and make sure it's heated in all areas.

If you are not afraid of damaging the cardboard box, use a knife to scratch around the sticker and tear it again

Use a hair dryer to heat the glue on the sticker, blow it soft, and you can tear it off.

Wet some water, there is a hair dryer to blow

30-40 degrees has no special effect, can be tested by high temperature, you don't have to worry, Fujian Shangchen Technology specializes in the production of label paper!