The method of industrial removal of self adhesive, how to remove self adhesive

with an eraser. Principle: Rely on the rubber to fuse the self-adhesive glue.

Method: Use the eraser to wipe constantly, the place with glue will turn black at the beginning, but the glue will slowly fall off after wiping for a long time.

Advantages: easy to operate, quick effect Disadvantages: average effect.

With a hair dryer. Principle: Rely on heat to remove self-adhesive.

Method: Use a hair dryer hot air gear, at a distance of about 10cm from the sticker, and blow directly with hot air; After blowing for a while, slowly remove the self-adhesive label while blowing.

Advantages: easy to operate, good effect, quick effect.

Disadvantages: It is not suitable for soft plastics that are not heat-resistant, and the high temperature can easily deform the object.

with edible vinegar. Principle: Similarity compatibility principle.

Method: Dip a dry dishcloth in white vinegar or vinegar and completely cover the area with the label so that it is completely soaked. After maceration for 15-20 minutes, gradually wipe off with a dishcloth along the edges of the sticker, and finally soak it in water for a while.

Advantages: suitable for self-adhesive on tableware such as bowls and chopsticks, non-toxic and harmless.

Disadvantages: Slightly less effective in decontamination.

with cooking oil. Principle: Similarity compatibility principle.

Method: Apply the cooking oil evenly on the place where the label is applied, wait for 3 to 5 minutes, and then slowly tear it off directly from the corner of the label by hand, so that there will be no label marks.

Advantages: glass, stainless steel and other hard objects have good decontamination effect.

Disadvantages: The effect of removing other objects self-adhesive is not good.

with lemon juice. Principle: Similarity compatibility principle.

Method: Squeeze lemon juice on the hands with sticky adhesive dirt and rub it repeatedly to remove the self-adhesive marks.

Advantages: It is suitable for removing sticky adhesives from the hands and will not cause any damage to the skin.

Disadvantages: The effect of removing other objects self-adhesive is not good.

with alcohol. Principle: Similarity compatibility principle.

Method: Use an alcohol-soaked rag to completely soak the part with the self-adhesive label, wait for a while, and slowly wipe the self-adhesive label from the edge to the middle with the alcohol-soaked rag until all the self-adhesive is removed.

Advantages: glass, stainless steel and other hard objects have good decontamination effect.

Disadvantages: Alcohol is not easy to obtain, and there is some damage to the skin of the hands.

With wind oil essence. Principle: Similarity compatibility principle.

Method: Completely soak the place with self-adhesive with wind oil essence, and wipe it off vigorously with a dry rag after 15 minutes. If the dirt is difficult to remove, you can extend the soaking time of the wind oil essence and then rub it vigorously until it is clean.

Advantages: Almost all items are not damaged, especially on printed and painted surfaces.

Disadvantages: Decontamination takes a little longer.

There are many ways to remove self-adhesive in industry, and I will introduce some common methods to you from multiple perspectives. Temperature is an important factor. Working at the right temperature makes it easier to remove the stickers.

However, too high a temperature may cause the glue to melt and cause damage to the object, so the temperature should be controlled within a suitable range.

Chemical solvents are also one of the commonly used methods to remove self-adhesives. For example, solvents such as ethyl acetate, acetone, and alcohols can all play a role in dissolving glue. However, when using chemical solvents, it is necessary to pay attention to safety protection and ventilation environment to avoid harm to the body.

Mechanical force can also help remove stickers. For example, using a tool such as a scraper or chipper, self-adhesives can be scraped or removed by applying force. This method requires attention to the mastery of strength to avoid scratches on the sticky objects.

You can also try some special gum removers or home methods. There are some products on the market that are specifically for self-adhesive removal, such as Moisturizing Hand Cream, which are said to be very effective and are loved and praised by consumers. Some household methods can also be tried, such as using lemon juice, alcohol or cooking oil to wipe the stickers, which can sometimes achieve good results.

If none of the above methods can solve the problem, it is recommended to seek professional help. They have the relevant expertise and experience, and can give more accurate and feasible solutions according to the actual situation.

There are many ways to remove self-adhesive in industry. When choosing a specific method, it is necessary to apply it flexibly according to the actual situation and pay attention to safe operation. I hope the above introduction is helpful to everyone!

Method of removing self-adhesive.

Normally, when we remove the stickers, we heat the stickers directly. To put it simply, with the help of a hair dryer at home, the hot air mode is turned on to heat the self-adhesive. Generally, after heating for a period of time, we find that the self-adhesive is not as sticky as before, so we use a blade or cardboard to slowly scrape off the self-adhesive.

01 Although this method is relatively common, it is also very simple and convenient to use. However, it should be noted that not all materials are suitable for using a hair dryer to blow heat. After all, some materials will damage the substrate after being blown hot by a hair dryer.

02 Nowadays, every household will have wind oil essence or alcohol, and we can also use wind oil essence and alcohol to properly remove self-adhesive. The specific method is to apply wind oil essence and alcohol to the self-adhesive, generally wait for 5 minutes, and then you can clean it.

03 However, friends need to pay attention to the fact that alcohol is a flammable substance, and when using it, you must pay attention to safety to avoid causing many problems.

04 If the area of self-adhesive in the home is not large, we can also use an eraser directly on the surface of the self-adhesive to erase. It has to be said that using an eraser to erase the sticker is more laborious, and the area is not large, and the final removal effect varies from person to person.

1.First, tear off the self-adhesive decorations attached to the glass or the surface of the product, soak the towel with warm water (hot water should be used in winter), and wipe twice on the self-adhesive traces; Then use a warm and moist towel to soap and wipe the marks several times; Finally, wipe off the soap foam with a clean, warm and humid towel, and the sticker marks are removed.

2.Use toothpaste to evenly apply to the surface of the self-adhesive, stay for a while, and then wipe it with a soft rag, sometimes the self-adhesive is more, more firm, and then apply the toothpaste on the traces that have not been removed at one time, the method is still the same, you can remove the headache of the self-adhesive. The principle is that toothpaste contains glycerin, which is a good solvent that can dissolve the components of self-adhesive, and many cosmetics also contain glycerin, which can also be used to remove self-adhesive.

3.Again: scrape with a pen, paper and knife, suitable for hard bottom surfaces such as glass and floor tiles; Rub with alcohol, suitable for glass, floor tiles, clothing, etc.; Freezing, self-adhesive After freezing, it becomes hard and can be torn off directly, which is suitable for alcohol, scratching and other methods.

4.I heard that the effect of wind oil essence can also be used. If it is a sticker or something like a self-adhesive, it can be removed with a hair dryer, but it is not suitable for plastic, and the overheated plastic will be deformed.

5.Hot blowing with a hair dryer, this effect is very good, and it is convenient at home Everyone basically has a hair dryer, whether it is sticker glass, plastic, wood, metal, you can use a hair dryer to blow back and forth a few times, and then tear a small side, along the direction of the tear while slowly tearing while blowing with a hair dryer, the effect is very good.

Self-adhesive is very common in life, especially those newly bought cups, stainless steel basins, bowls, etc., which are indispensable for its existence, which is simply a headache. So how do you remove self-adhesive? What is the best way to clean up self-adhesive? The answer is here.

The sticker is very firm, it is difficult to tear off, even if you try to tear it off, there will be residual glue, and the residual glue will be black after a long time, which is very annoying. However, there are many ways to clean self-adhesive, among which the most commonly used is to use a hot towel or a hair dryer to heat it up, and it will be more convenient to tear it off. As for the residual glue, we can use glass water, nail remover, alcohol, etc. to apply to the glue, and then scrape it with a plastic spatula, and apply it while hanging.

We usually use glass water more, and we can also scrape it directly with a blade when scraping, as long as we pay attention to the strength and do not scratch the item.

When it comes to cleaning self-adhesives, the first thing that comes to my mind is the hair dryer heating method, which is very simple, we can first use a hair dryer to blow hot air on the self-adhesive for 10 minutes, and then it will be much easier to tear and will not tear. If there are still glue marks on it, it is time-consuming and laborious to wipe it with water. We can wipe it with a soft cloth dipped in alcohol or gasoline, which is much easier.

In addition to the glue for retail on the market, it is best to have a pressure nozzle, the glue removal of the car body is a little simpler, acetone can also be, the most commonly used in rural areas is the gasoline drop rag, and then use the rag to soak the traces of the self-adhesive, a wipe can be, that is, the gasoline smell is big, and pay attention to fire prevention. In addition, the alcohol wiping method is also used a lot, we brush the alcohol on the glass of the sticker, and immediately see that the sticker slowly softened and dissolved. With a gentle hand, the sticker leaves the glass cleanly.

These traces can also be removed with safflower oil and gasoline.

1. Toilet waterToilet water has a certain effect on the label that is attached to the glass, but it cannot be completely eliminated and will leave traces.

2. Alcohol3. Wind oil essenceBecause of the alcohol content of wind oil essence, it can also eliminate glue marks to a certain extent, and the use method is similar to alcohol, but the effect is not as obvious as alcohol.

Huayi labelFocus on self-adhesive for 10 years, introduce advanced equipment and technology at home and abroad, respect the social and natural environment, and meet customer needs with excellent quality and service. In order to avoid similar phenomena, we have developed a variety of non-adhesive adhesive label products, which can be used with peace of mind.