Before sealing the balcony, should the insulation be removed?

It is to be demolished, and the balcony can be sealed only after it is removed, and it will not have a certain impact on the quality and appearance of the balcony.

To be dismantled, in fact, many processes inside are to be remade, but also to ensure quality, the insulation layer also needs to be repaired.

Before sealing the balcony, the insulation layer should be removed, because if it is not removed, the firmness of the balcony will be reduced.

Before sealing the balcony, should the insulation be removed?

Hello, to dismantle. The insulation layer inside the balcony must be removed, if the balcony is closed first, and then the insulation layer is removed, otherwise there will be a section of insulation thickness at the junction of the window and the wax wall, not only the visual effect is poor, but also the post-processing will be a little troublesome. Therefore, the correct sequence is to remove the insulation layer of the sliding balcony first, then measure the size of the windows, and finally install the windows.

If you plan to seal the balcony at home, then you can directly remove the insulation layer, because the balcony exterior wall is insulated, and the window is installed later, there is no need to worry about affecting the insulation effect of the home. The balcony insulation layer has a certain thickness, and the reed can also expand the space of the balcony when shoveled off, and it is also more convenient to paste tiles in the later stage.

In order to increase the space in the bedroom or living room, some people will plan to seal the balcony, before decorating the balcony, some people are also curious about whether to remove the insulation layer before sealing the balcony? The insulation layer is a part of the house construction, but if it is not removed, the space does not increase much, but what are the disadvantages of removing the insulation layer? I hope the content is helpful to everyone.

1. Should the insulation layer be removed before sealing the balcony?

Whether the balcony insulation layer should be removed, it is necessary to consider the home decoration from two angles and choose not to seal the balcony, this balcony belongs to the exterior wall, and according to the regulations, the house decoration is not allowed to remove the external wall insulation. Although the insulation layer looks relatively flat and suitable for direct tiling, the insulation layer is mainly asbestos net and foam, which can not absorb the moisture of cement, and it will fall off if the tile is pasted on it for a long time, but this situation will not occur after the removal of the tile. If the external wall insulation cannot be removed, a layer of barbed wire can be added to the insulation layer to hang, and then the tiles are pasted on it, and the adhesive glue or cement mortar is selected for bonding, and the firmness must be ensured when pasting the tiles.

If you want to remove the original insulation layer, you can remove the insulation layer, re-fix it with rock wool and keel, and then coat a layer of anti-cement board and paste bricks on the cement board.

If you choose to seal the balcony for home decoration, you can directly remove the insulation layer. Because the day before yesterday belonged to the interior wall, the insulation layer of the balcony was not necessary. For sealing balconies, removing the insulation has the following benefits:

First, the eradication of the insulation layer is conducive to the expansion of the balcony space, including the small balcony families can try; Second, it will be more convenient to paste tiles after removing the insulation layer, and there is no need to hang barbed wire, and then paste tiles on the wall. At this time, if the decoration master still asks you to shovel off the insulation layer, you must be careful to prevent the decoration master from asking for more labor money for this, remember to be careful not to be pitted.

Second, what are the disadvantages of removing the insulation layer?

It cannot be eradicated. Because wall insulation is a measure to maintain a constant indoor temperature in summer and winter. According to the national energy-saving requirements, all residential buildings and other buildings must be energy-saving and insulated on the exterior walls.

And it is a mandatory requirement of the state. There is a protruding part of the thermal insulation bridge on the wall, which is generally recommended to be removed and flattened. The whole wall is insulated, you can shovel or not, this depends on the actual requirements of the landlord.

The removal of the insulation layer is sure to be charged, and the leveling of the base layer after the removal will not necessarily increase the cost.

Should the insulation be removed before sealing the balcony? According to the actual situation, it can be considered whether to remove the insulation layer, and if there is a need to remove it, it can be removed. Before dismantling, it is necessary to be clear what are the disadvantages of removing the insulation layer, and do not wait for the dismantling to find out the disadvantages and then regret it, and then it will be very troublesome.

I believe that when many people are decorating a new house, they will encounter a problem: whether to remove the insulation layer in the wall of the balcony. The insulation on the balcony has been renovated by the developer, and many owners feel that they can keep it directly, and they can save a lot of money.

However, many decorators suggest that the insulation left by the developer is best dismantled or reinstalled. balconyWhether the insulation layer in the wall should be removed?In fact, the decorator did not suggest this with the intention of earning the owner's money, but it was really necessary to do so.

Before sealing the balcony, the balconyWhether the insulation layer in the wall should be removed

Before, there were a lot of owners who had this problem. The developer has made insulation on the balcony. At first, the owners or fingers thought that this would be fine, and that they could save a lot of money by sticking wall tiles directly on the wall.

But many people find that the wall tiles on the balcony start to fall off after 3 months of renovation. The owners approached the renovation staff theory, but the inspection found that there was no problem with their tiling technique. The problem was caused by the developer's digging pit insulation.

Finally, under the coordination of both parties, the decorator re-laid the wall tiles for the owner. Since then, their recommendation to every renovator is to remove the insulation unless testing determines that it is actually usable.

Later, many owners realized that they had misunderstood the renovation workers. Whether the insulation layer in the wall should be removed?If the balcony is closed directly without removing the insulation, even if the extended expansion screws are used to install the doors and windows, they are only installed on the soft insulation, which will affect the safety of the high-rise balcony.

Its sturdiness and durability are not as strong as those installed directly on cement walls, which also increases the safety hazards of later use.

In addition, if the insulation layer is not removed, and the balcony is directly sealed, the façade and windows of the insulation layer are prone to gaps. If the seal is not good, water can seep into the wall through the joints and can also make the wall moldy.

balconyWhether the insulation layer in the wall should be removed?In any case, the insulation in the balcony must be removed. If the balcony is closed directly, the connection between the window and the wall will have the thickness of the insulation, which will not only be poor in visual effect, but also troublesome in the later stage.

So the correct sequence is to first remove the insulation layer from the balcony wall, then adjust the window size, and finally install the window.

You can get it for free

Many families will install insulation layer on their balconies, how to remove the balcony insulation layer, let me explain it to you today.

The way to remove the balcony to protect the medium and wide potato temperature layer is to check the insulation layer process of the Qiaoyan in the balcony. Generally, it is inspected in the order of wall, insulation layer, galvanized mesh, cement mortar scraping and coating. If the missing process is made up, such as galvanized mesh, the material of the seller is removed, and then the brick is removed.

In general, it is possible to remove the balcony insulation with high-grade cement or curved adhesives.

It should be noted that after the balcony insulation layer is removed, the repair work can not be ignored, for example, some balcony insulation layer is removed after the new brick is needed to build the wall, and the new wall is set up with "tendons" to better ensure the stability and seismic resistance of the wall. In addition, before the balcony insulation layer is removed, the property must be declared, and the wall can only be demolished after the approval of the property, and the wall must be demolished according to the original design drawings provided by the property, otherwise it will affect the wall safety accident.