How the sconces are installed, about the decoration of the sconces

Wall lamps are interior decorative lamps, which are generally equipped with milky white glass lampshades. The power of the bulb is mostly in 15 to 40

The tile is left and right, the light is elegant and harmonious, and the environment can be decorated with elegance and magnificence, especially for the newlywed room.

There are many types and styles of wall lamps, and the common ones are ceiling lamps, color-changing wall lamps, bedside wall lamps, and mirror fronts.

wall lamps, etc. The installation height of the wall lamp should be slightly higher than eye level, about a meter high. The illumination of the wall lamp should not be too large. Such.

More artistically infectious. The choice of wall lamp shade should be based on the wall color. White or creamy yellow walls, suitable for use.

light green and light blue lampshades; For lake green and sky blue walls, it is advisable to use creamy white, light yellow, and brown lampshades. This.

In a large area of the wall, a conspicuous wall lamp is embellished, which can give people a sense of elegance and freshness.

The wires connecting the wall lamps should be light-colored, so that they can be painted with the same paint as the wall color to keep the wall clean and tidy.

In addition, you can dig a small groove in the wall that is just right to insert the wires, insert the wires, fill them with lime, and then apply the same paint as the wall.

There are 3 ways to install this fixture.

One is American, the other is European, and there is Japanese.

Generally, the installation of wall lamps in China is European-style.

Punch holes in the wall first, then drive the gecko into the wall to fix the hanging plate of the lamp. Plug in the wires. It is estimated that the lamp is completed.

If you don't understand: Chat privately: 401510420

Drill holes in the wall according to the actual style of the lamp.

Nowadays, wall lamps have been adopted by many homes. Wall lamps are mostly installed on balconies, stairs, corridor aisles and bedrooms and are suitable for long lights. The installation of wall lamps should be mastered with the necessities and should not be installed blindly.

When coordinating with the interior decoration, it is necessary to take into account the convenience of use. The following will introduce you to how to install the wall light.

How to install wall lights.

Wall light installation method.

The installation method of wall lamps is relatively simple. After determining the location, the main thing is to fix the wall light stand, usually using recessed parts or perforated methods to fix the wall light to the wall.

1。Brushing.

Applying the adhesive to the adhesive surface with a brush is the simplest and most commonly used method. This method is suitable for single batch or small batch production and construction.

2。Spraying method.

For low-viscosity adhesives, they can be sprayed with a regular paint spray gun. For high-viscosity adhesives with short active cycles and difficult cleaning, reinforced spray guns from the reinforced plastics industry can be used. The advantages of the spraying method are uniform coating and high work efficiency; The disadvantages are that the glue is lost a lot (about 20 to 40) and the solvent is lost in the air to pollute the environment.

3。Self-flowing method.

Use rain automatics. This method is ideal for flat plate parts and is highly versatile and suitable for large-scale production. In order for the glue not to clog the nozzle, the glue used with Yupai must have the appropriate viscosity and fluidity.

4。Roller coating method.

The lower part of the rubber roller is immersed in the glue, and the upper part is directly or indirectly exposed through the printing roller and in contact with the working surface, and the glue is rotated from the workpiece to apply the glue to the adhesive. on the surface. In order to achieve different gluing effects, the rubber roller surface can be opened with different grooves and patterns, or the pressure of the rubber roller can be changed, or the amount of glue can be controlled by the scraper.

Rubber rollers can be made of rubber, wood, felt, or metal.

5。Scraper method.

It can be applied to high-viscosity limb and paste adhesives as well as adhesive materials such as flooring. Rubber sheets can be made of materials such as elastic steel sheets to 1 to thick or hard-mounted PVC sheets.

I had to learn how to install wall lights.

The installation of the wall lamps is very special. It is necessary to consider the decoration and practicality in a comprehensive way, and not to spoil the entire decoration. The above is an introduction to the installation method of wall lamps.

I hope this article was helpful to you. If you still don't understand something, you can **** Tuba Rabbit, and Tuba Rabbit will provide you with more complete, detailed and updated information.

You can get it for free

Society is progressing, and home decoration is also progressing, becoming more and more tasteful. The decoration of the family wall lamp provides a strong stroke for the home decoration taste. How to decorate the sconces? Let's introduce you to the decoration of wall lamps.

1. Pay attention to the quality of lampshade.

When buying a wall lamp, you should first look at the quality of the lamp itself. The lampshade is usually made of glass, while the bracket is generally made of metal. The lampshade mainly depends on whether its light transmittance is appropriate, and the pattern and color of the surface should echo the overall style of the room.

Whether the corrosion resistance of the metal is good, whether the color and luster are bright and full are all important indicators to check the quality.

2. The brightness of the wall lamp.

Generally speaking, soft light is preferred, and the power should be less than 60 watts. In addition, different types of wall lamps should be selected according to the needs of installation, such as: if the room is small, use a single-head wall lamp, if the room is large, use a double-head wall lamp, and if the space is large, you can choose a thicker wall lamp; Otherwise, choose a thinner one.

Finally, it is best to choose a wall lamp with a protective bulb cover, which will prevent the wallpaper from igniting and causing danger. 3. The style and specifications of the wall lamp should be coordinated with the installation site, such as a double fire wall lamp can be installed in a large room, and a single fire wall lamp can be installed in a small room.

4. The color of the wall lamp should be coordinated with the color of the installed wall.

5. The thickness of the wall lamp should be coordinated with the environment of the installation site.

6. The power of the wall light source should be consistent with the purpose of use.

7. The installation height of the wall lamp should be slightly higher than the head.

1. Determine the height and position.

Before the installation of the bedroom wall lamp, we must first determine the height and location of the wall lamp installation, the installation height of the bedroom wall lamp is about about one meter, and the specific height should be determined according to the height of the actual bedroom area and the house price, so it is necessary to choose and measure the height and position of the wall lamp installation, and mark the installation position of the screw hole on the wall.

2. Drill and install screw holes.

Before drilling, be sure to pay attention to the layout of the wall wiring on the wall, so as not to drill the wires and cause unnecessary safety hazards.

3. Install screws.

Install the expansion screws in the drilled wall holes, use a hammer to drive the screws into the wall, know that all the expansion screws enter the wall, and fix them.

4. Fix the lampholder.

Place the wall lamp board on the wall where the expansion screws have been installed, pass the wooden screws through the wall lamp board, and fix it on the expansion screws. When fixing the wall lamp base, it is best to find someone to help you hold the hanging board, so that when fixing the wall lamp base, you can avoid the offset of the position of the wood screws.

5. Connect the power cord.

After installing the base and ceiling tray, you can connect the wall lamp to the power cord, before connecting the power cord, be sure to turn off the power supply, pay attention, the blue zero line, the red live wire, and the yellow-green bottom line should not be connected wrong, otherwise it will be removed and reinstalled after installation, which is particularly troublesome and troublesome.

6. Finally, install the wall lamp on the wall lamp holder, turn on the power, and the wall lamp will be installed and ready to use.

Bedroom wall light installation method:

The first thing to determine is the height, the installation height of the wall lamp is generally slightly higher than the eye level, about meters. The height of the wall lamp is generally 1440 1850mm from the working surface, and 2240 2650mm from the ground. However, the distance between the wall lamp in the bedroom and the ground can be closer, about 1400mm 1700mm.

The distance between the wall lamp and the wall surface is closer, generally at 95mm 400mm. Then you need to determine what kind of wall light you are installing, and then determine where you want to install it, so that you can start the installation.

The first step is to mark the position of the expansion screw on the wall according to the hole in the hanging plate of the wall lamp.

The second step is to use an electric drill to drill holes at the marked points on the wall, pay attention to understand the circuit layout diagram first, do not drill into the wires, and pay attention to the depth of the drilled holes.

The third step is to start to install the expansion screws after drilling the holes, first plug the expansion screws into the drilled holes, and then use a hammer or other things to drive the expansion screws into the wall until they are all submerged in the wall.

The fourth step is to pass the wooden screws through the holes of the wall lamp hanging board, and then fix them on the expansion screws, paying attention to the fixing on both sides to be carried out alternately, so as to avoid the offset of the wooden screws.

The fifth step is to connect the hanging plate with screws and the ceiling plate, and then screw on the screw to fix the ceiling plate. Finally, disconnect the indoor power supply, then connect the wires of the wall lamp with the power cord, and install the wall lamp.

It depends on what kind of wall it is, if you have a cement wall, you have to drill holes, expand screws, or nail wooden wedges, there are many ways, find one to decorate, it will be done in a while, it will not be very troublesome

You can ask their staff to install it when you buy it.

There should be a rung in the base of the wall lamp that was originally installed on the wall (we call it a "flat arm"), if it is installed on the wall, this rung should be installed first, and then the wall lamp should be fixed on the rung with screws.

If your wall lamp is the same, you can first fix the rungs on the glass with glass glue, (glass glue should surround this rung, not just the bottom surface) and wait for two days (or more) after the strength of the glass glue has reached, you can install the wall light. The firmness of glass glue used on glass is still good. (This doesn't have to break the glass).

Bedside lamp wall lamp installation one.

1. The height is the wall lamp off the ground;

2. The distance between the wall lamps and the wall surface is 95 400mm.

Bedside lamp wall lamp installation two.

Installation is a simple matter, mainly to fix the wall light on the wall.

When installing, the method of embedded parts, punching and gluing will be used to fix it on the wall.

The best method is gluing. The main ones are as follows:

1. Brush method: apply the adhesive on the surface, which is the easiest method.

2. Spraying method: low-viscosity adhesive adopts spraying method. Advantages: uniform gluing, high work efficiency; Disadvantages: large loss of glue, easy to cause environmental pollution.

3. Artesian method: rain automatic device is adopted. It is suitable for flat parts, with high ergonomics and suitable for mass production.