Is it better to use a buckle or an edge banding machine for the edge banding of the ecological board

I used it for home decorationEco boardsBuckle edge banding, at this stage of a year, there are some positions that have long been degummed, feelingHandmadeThe assembled buckles, tightness, and decorative design are beautiful and generousare not as good as equipment edge banding. Especially in the corner area, the arc-shaped corner must be bent by bending the sheet metal of the buckle wound, which is not very beautiful and generous. The edge of the equipment is 1-2 yuan per linear meter, and the price is not too high.

It's comprehensive, and it doesn't seem like there's a big gap. It's also very beautiful. There will be no human factor.

Therefore, it is better to have a standard, and it is best to do equipment edge banding. Ask the carpenter to make good materials, boards.

After the edge is sealed, it is transported to the home for assembly.

The double-sided ecological board is all paint-free board, with decorative design effect, but it is not the same for the building façade of the ecological board, because the middle of the ecological board is made of wood, so the building façade of wood will be caused by laser cutting, if the edge is not carried out, then the building façade will be immediately exposed to the outside is not good-looking, so the ecological board will carry out edge sealing to decorate the design; For the ecological board, if the edge is not sealed, it will cause damage to the border, and the edge of the ecological board will be explosive.

In terms of the application of buckle edge banding, the ecological board is used for engineering construction.

It is very convenient, as long as the ecological board is made, it can be used to seal the edge according to the application of the buckle you want to match on the spot, and the construction of the project is very easy and convenient; It is not easy to produce color cast: for the buckle, it is often all produced and manufactured by the ecological board store, and there is no color difference with the plate, which belongs to the large buckle, and the overall home is not easy to cause color difference between the ecological board and the buckle edge after the whole home is done; It can cover the little bursting edges and non-silky marks that occur when the ecological board is cut, and has a certain covering effect.

For the edge banding of the ecological board, the edge of the board must be cleared neatly first, and the building façade of the plate can not have dust before the edge banding, which is also a necessary condition for edge banding.

It is the key link to ensure the quality of edge banding, and different glues are often applied when the edge of the ecological board is banded, so it is necessary to choose excellent glue to bond, so that the edge banding will be firm and environmentally friendly. When applying an edge banding machine to edge banding for an eco-boardThe edge banding strip must be selected with excellent quality, and it is necessary to pay attention to the color and surface of the edge banding stripCompressive strength, the wear resistance of the surface and its ability to resist aging.

The ecological percentage is more convenient first, there will be no color difference, the disadvantage is that the aesthetics are average, and sometimes there will be some subgrade, the edge banding machine is more beautiful, and the teacher is very firm, the disadvantage is that there is a certain construction difficulty; The difference is that if you use an edge banding machine to seal the edge, most of them are made by eco-board merchants, while the buckle is still made by a master.

Generally speaking, for the edge banding of the ecological board, it is better to use the edge banding; The concept is different, the essence is different, the use method is different, the effect is different, the environmental protection is different, and the aesthetics of the decoration is different.

The edge banding machine of the ecological board is good; The installation technology of the buckle and the edge banding machine are different, the material is different, the material is different, the expansion rate is different, and the adhesion is different, and the two are very different on the whole.

Summary. Hello, the first choice of edge banding machine edge banding. Disadvantages of buckle edge banding:

Aesthetics in general: for the use of buckles for the edge banding of the ecological board, although it can cover the ugliness, but because the edge of the buckle will be higher than the plate, the overall aesthetics are average, not high-grade enough, and the advantages of the ecological board cannot be fully displayed; Easy degumming: For the use of buckle edge banding for ecological boards, nail-free glue is usually used for pasting, but due to the uneven use of nail-free glue, the phenomenon of buckle degumming often occurs, which affects the overall appearance and daily use.

Is it better to use a buckle or an edge banding machine for the edge banding of the ecological board? What's the difference?

Hello, the first choice of edge banding machine edge banding. Disadvantages of buckle edge banding: general aesthetics:

For the use of buckles for the edge banding of the ecological board, although it can cover the ugliness, because the edge of the buckle will be higher than that of the plate, the overall aesthetics are average, not enough to be of high grade, and the advantages of the ecological board cannot be fully displayed; Easy degumming: For the use of buckle edge banding for ecological boards, nail-free glue is usually used for pasting, but due to the uneven use of nail-free glue, the phenomenon of buckle degumming often occurs, which affects the overall appearance and daily use.

Edge banding machine edge banding features: strong aesthetic effect: for the use of edge banding machine to seal the edge of the ecological board, the edge banding strip is pasted on the ecological board through hot melt at one time, so that it is pasted firmly and beautifully, and the natural formation of one, and finally after the combination of the effect is very good-looking, if in simple words, the edge banding machine is the machine edge banding, which will naturally be stronger than the effect of artificial edge banding; Stick firmly:

When using the edge banding machine to seal the edge of the ecological board, the attention of the edge banding strip will reach a high environment, and the adhesive will be used at the same time, so that the firmness after pasting is very high; Beautiful edge treatment: For the edge banding of the ecological board, the edge treatment of the board is very important, because this affects the appearance and use, and when the ecological board is used to seal the edge, the edge can be very beautiful and convenient to use at the same time.

There is a certain degree of construction difficulty: for the use of edge banding machine to edge banding the ecological board, whether it is the use of large edge banding machine or small edge banding machine, there are certain requirements in operation, it can be said that there is a certain construction difficulty, because it is necessary to ensure the integrity, aesthetics and firmness of edge banding; The cost is relatively high: for what edge banding machine to banding the edge of the ecological board, the cost is higher than that of the buckle, especially for the use of large edge banding machine, it will also increase the cost of cutting, so the overall cost is higher than the traditional buckle.

One meter of machine edge banding of ecological board edge banding is 1-2 yuan, and it is not high. It's a strong whole, and it doesn't look like much of a difference. Relatively aesthetically pleasing. There is no human error. Therefore, it is recommended that if there are conditions, it is best to do machine edge banding. I recommend using an edge banding machine.

It is better to use an edge banding machine for edge banding of ecological boards, because sometimes the buckle will be unstable, which will affect other boards, and it is also very dangerous.

I think the edge banding machine is better, because the edge banding machine can play a sealing effect, and it will be more beautiful.