Can the kitchen countertop water retaining strip be edged with real porcelain glue?

Everyone knows that buying a house is a major event in life, and decoration is a bigger thing for friends who buy a good house. You think, I finally bought a house, no matter the size of the area, it is my future home, it is my own haven, so I want to decorate it perfectly. Therefore, many people will be entangled in some trivial things in the process of decoration, and Chang Shijun understands a problem - whether to make a water retaining strip on the kitchen countertop.

So today, Chang Shijun will talk to you about this issue.

In fact, there are two kinds of water retaining strips on kitchen countertops, front water strips and rear water strips, as shown below. This picture shows the back windshield.

Monsters are coming, give you a base, can you resist the monster attack?

Ad. Monsters are coming, give you a base, can you resist the monster attack?

This picture shows the front water strip.

Chang Shijun will first tell you about the back water strip. Tsuneishi Jun personally believes that the countertop should be equipped with a back water strip, which refers to the water strip against the wall, which can fill the gap between the countertop and the wall, if not done, the water will seep into the gap between the cabinet and the wall, which will not only lead to mold, but also damage the cabinet body. Some people say that it is not okay to fill with glass glue, but the answer is no, the gap of glass glue will be black and dirty after a long time, and the waterproof performance is average.

The front water strip may not look pretty, but Tsuneishi thinks it is a very practical design. The outer edge of the countertop is higher than the countertop, which can block the flow of water to the ground, and if the soy sauce or anything is overturned, it can well prevent it from flowing down and staining the floor, and cleaning is on the limited countertop. However, now many masters will do a water stop valve on the cabinet door, so the water retaining strip does not have much impact, mainly depends on the individual, if the washing basin at home is made of an undercounter basin, it is better not to do it, if it is a countertop basin, it is best to make one.

Tsuneishi-kun will give you another science popularization of the materials for making water retaining strips, there are three kinds.

The first type, marble: if you use marble water retaining strips, you need to use glue, and there will be gaps. The second is quartz stone, which is polished into various shapes after being glued with adjusted stone glue, but once it is used for a long time, it will fall and loosen.

The third is artificial stone, which has the best effect, but it is not resistant to dirt and will also have water seepage.

It can be edged with real porcelain glue.

Cabinet countertop water retaining strip installation steps:

Step 1: Wipe the water and dust off the ground;

Step 2: Determine the installation position of the water retaining strip and mark it on the ground with a pen;

Step 3: Tear off the adhesive and stick the water retaining strip on the ground according to the marked position;

The fourth part: glue and seal the position where the two ends of the water retaining strip are in contact with the wall;

Step 5: Glue both sides of the water retaining strip and apply it evenly, and it can be used after 24 hours;

Can kitchen countertops do without backsplashes? Is it okay to do beauty sewing?

Dear, hello, I am happy to serve you, the kitchen countertop can not be used as a backstop water strip when decorating the kitchen, relatives think that as long as the cabinet is selected, the kitchen is easy to use, and often forget to make a water strip. If the kitchen countertop water retaining strip is not done, once the faucet is turned on, the water seeps out and flows to the ground, which is easy to make the ground slippery, easy to slip to injury, and it is easy to make the ground dirty and unintentionally clean. So, let's listen to the introduction of Jinan decoration master!

The water retaining strip is generally divided into two types: the front water strip and the rear water strip 1, the front water strip: refers to the place outside the counter surface to do the water strip, some people will say that it is not convenient for this group to cut vegetables quietly, so that the design can prevent the water from flowing to the ground, and it is also convenient to take care of it usually.

Nowadays, it is popular to make a sink on the cabinet door, so you don't need to make a water barrier in the front. 2. Rear water strip: It refers to the water strip against the wall, which can fill the gap between the countertop and the wall, and can also prevent the slag water from flowing to the ground and the wall, so as to avoid the wall from being damp and mildew.

There are also many people who use glass glue to fill the gaps, but it will become black and moldy, and it is easy to retain dirt. Water retaining strips also have disadvantages, which will reduce the usable area of the countertop, and it is easy to accumulate dust and oil smoke. 3. The material of the water retaining strip is divided into:

Quartz material, artificial stone material, marble material, etc. It can be made into arc, straight edge, arc edge and Roman edge; Curved shapes are easy to clean, and straight, rounded, and Roman edges will make kitchen countertops more beautiful. Tips:

The advantages of making water retaining strips on the kitchen countertop outweigh the disadvantages, which will make the kitchen easier to take care of and prevent injuries from occurring. The above book is an introduction to the kitchen countertop water retaining strip, I hope it can help you.

Cabinet countertop water retaining strip installation steps:

Step 1: Wipe the water and dust off the ground;

Step 2: Determine the installation position of the water retaining strip and mark it on the ground with a pen;

Step 3: Tear off the adhesive and stick the water retaining strip on the ground according to the marked position;

The fourth part: glue and seal the position where the two ends of the water retaining strip are in contact with the wall;

Step 5: Glue both sides of the water retaining strip and apply it evenly, and it can be used after 24 hours;

Before installing the stone, it is necessary to check the flatness of the on-site cabinets and base cabinets, check whether the countertop of the stone to be installed is free of error with the size of the site, and if there is an error, it needs to be reprocessed and trimmed. When installing the stone countertop, it is necessary to retain the distance between the stone and the wall, the general gap is as much as 3-5mm, the main purpose of leaving this gap is to prevent the thermal expansion and contraction of the stone countertop and cabinet in the future, stretching, after the installation is completed, it is necessary to put glass glue on the gap. If you need to install a sink and other devices, first of all, you should make some local trimming of the quartz countertop and the water file on the countertop, and knock to check whether it is suspended, for some tiny suspended shapes, you can add some glass glue to the bottom of the stone for filling, for some serious unevenness, you need to stop the construction, and the countertop of the cabinet needs to be adjusted to a flat state.

For some L-shaped countertops or some extra-long countertops, some strong glass clamps can be used to clamp the stone to squeeze the gaps if necessary, and the gaps must be cleaned. Here, it is not advisable to polish the joints between the stone and the wall, especially some dark stone series. At the bottom of the water retaining strip of the cabinet, evenly apply some glass glue for color toning, which is used to stick the water strip, and do not use marble glue and other connecting gels, so as to prevent the stone from cracking or breaking due to too tight bonding after bonding.

In the on-site construction, avoid opening holes in the stone on the site as much as possible to prevent improper openings and stone cracks. For the missing glass glue, it can be cleaned with water after 10 minutes.

When the kitchen is renovated, the countertop design needs to be based on the actual situation. Is the kitchen countertop a water retaining strip? PChouse will take you to find out.

First of all, it needs to be determined according to the actual situation, if your sink is a countertop basin or shallow sink, splashing out a lot of water, you can consider installing a front water strip to prevent water from flowing to the ground along the edge of the table If you need to do water retention, it is recommended to make it with rounded corners. I think that the rounded corners are easy to clean, but in fact, we can compare a 90-degree right angle with a rounded corner. The water retaining strip made of quartz countertop is made of glue and polishing, which may loosen after a long time.

Therefore, we should pay attention to the fact that there is still a problem with the water retaining strip, that is, there will be a lot of grease stains in the gaps after a long time. So be sure to clean diligently. Keep it clean and tidy.

It is recommended to do the front water retention, but it should be noted that it is necessary to clean and wash frequently. There is often stagnant water on the edge of the water retainer, especially pay attention to clean up the water, if you soak it for a long time, it will have an impact on the life of the stone. Then there's the grease stains and the like.

In addition, I would like to mention that artificial stone is more likely to be dirty, and there is also the problem of bleeding, and I recommend that you do not choose artificial stone.

<><- What glue is used for kitchen edge banding:

The following 5 types of glue can be used for kitchen edge banding:

1. Waterproof glue.

Its sealing and waterproof performance are relatively good, and a waterproof layer can be formed after drying, which can play a waterproof and moisture-proof effect. The disadvantage is that the waterproof adhesive has strict requirements for the base layer, and the base layer can not have water vapor and dust, otherwise it is difficult to achieve the waterproof effect.

2. Glass glue.

Glass glue can be filled with different gaps and burning gaps, pasting different materials, it has a good waterproof and leak-proof effect, but it is not cold-resistant, not heat-resistant, and easy to hide dirt and dirt, and it will turn black after a period of time, so now more and more people do not use glass glue.

3. Epoxy resin glue.

The advantage of epoxy resin glue edge banding is that it can be pasted with a lot of good ones, and it also has the advantages of corrosion resistance, heat resistance, water resistance, mold resistance, etc., but the disadvantage is that it is expensive and brittle, and it needs to be used with plasticizers.

4. Sealant.

Sealants not only have good adhesion, elasticity, but also good resilience and can be used for dynamic seams. In addition, its weather resistance is also relatively good, and the service life can be as high as 15-20 years. The disadvantage is that it is not resistant to water, heat, and the curing time is relatively slow, and bubbles and cracking may occur at high temperatures.

5. Anti-mildew silica gel.

This kind of material belongs to the neutral curing silicone sealant, which is characterized by good durability, wide use, no odor when curing, mildew-proof, corrosion-resistant, temperature-resistant, not easy to deform, strong anti-fouling ability, easy to clean, and can be sealed for a long time, but when using the product for edge banding or sealing, before the base layer is completely cured, do not rinse the edge banding with water, otherwise it will affect the edge sealing effect of the product.

I believe that everyone is familiar with the water retaining strip, generally when we decorate the bathroom, we will install one outside the shower room to avoid stagnant water flowing outside. But in fact, when we make cabinets, we also need to install water retaining strips. So how to make the water retaining strip on the countertop of the cabinet?

Like my own home, I made a mistake when decorating it, and I didn't take this detail into account, and now it's so troublesome that the kitchen floor is always wet. When decorating for the second time, you must take this into account, it is too practical.

For example, when installing the countertop in his own house, the master only helped to make a back waterstop, which is also a very common practice. Because the main function of this water retaining strip is to make a circle of countertops for closing, because some people have uneven walls, so when the countertop is installed, there will be gaps. Of course, there is also a function, which is to prevent the water on the countertop from seeping into the cabinet from the inside, which will affect the service life of the cabinet.

In fact, when installing the countertop, you have to install a front water strip, that is, make the outer mouth of the countertop a little higher, so that when cleaning the water stains on the countertop, it is not easy for the water to fall to the ground. It may not look very beautiful, but the practicality is still very strong, of course, this treatment, generally have to be explained to the manufacturer in advance, otherwise the masters will not install, and their own home ignores this, so that every time when cleaning the countertop water stains, the ground is always wet.

Of course, when some friends make cabinets, considering that it is more convenient to use, they will also make the cabinet in the form of high and low cabinets, which is also a good detail. There is no clear standard for the height of the size, which is usually determined according to the height of the user, so when making, you need to test it well to avoid that the height of the cabinet is not suitable for you, which will be more uncomfortable to use.

Xiao Shi said: So when you decorate the cabinets, you should also take this detail into account, don't wait for the decoration to be done, only to find out the problem, and then to rework and deal with it, it will be more troublesome. By the way, I would also like to remind you that whether you are making a rear or a front water strip, it is best to ask the master to grind the water of the strip into an R-shape, so that it will be very convenient when cleaning up, and there will be no dead ends.