What to do if the floor tiles of the house are red

Dish soap can be used for daily cleaning of tiles. Cleaning tiles with a mixture of soap and a little ammonia and turpentine can make the tiles cleaner and brighter. If there are tea, coffee, beer, ice cream, grease and other pollutants attached to the surface of the tile, it should be scrubbed in time, if necessary, use sodium hypochlorite dilution (bleach), soak for 20-30 minutes and wipe it with a cloth; Some stains that have been infiltrating the brick for a long time can be soaked for several hours.

Ink, cement and other pollutants can use diluted solutions of hydrochloric acid and nitric acid, while paint, paint and other pollutants are best used special cleaners. When cleaning the joints or scratches of the tiles, you can apply toothpaste to the joints or scratches, and then wipe them vigorously with a soft, dry cloth to repair them, wiping them in the direction of the seams or scratches. If the damage is serious, it should be replaced in time or repaired by professionals to avoid personal injury.

For the most oily tiles on the stove and behind, in order to avoid cleaning trouble, you can gently apply the candle to the tile joints, first longitudinally, so that the joints can be evenly coated with candles; Then apply it horizontally, so that the thickness of the candle can be the same as the thickness of the tile, and when the oil stains on it, just wipe it with detergent to clean. Polished tiles should be waxed regularly, and it is advisable to wax them once every 2-3 months. The gaps between the bricks can be cleaned with stain remover from time to time, and then brush a layer of waterproofing agent on the gaps with a brush to prevent mold growth.

Polished tiles should be waxed regularly, and it is advisable to wax them once every 2-3 months. The gaps between the bricks can be cleaned with stain remover from time to time, and then brush a layer of waterproof agent on the gaps with a brush to prevent mold growth Ice cream alkaline cleaner. Lime scale acid cleaner.

Cement, scale, rust, rust spots use hydrochloric acid or phosphoric acid solution, wipe several times.

Rub it with thinner and you're good to go.

When cleaning the newly renovated floor tiles, the first step must be to use a broom to clean up the dust, and then splash water to wash, if it is a wooden floor, use a wet rag to wipe the dust.

The second step is to sprinkle laundry detergent or dish soap in batches, slightly moisten the water with a rag next to each other, and wipe it carefully and carefully, not letting go of the corners.

The third step is to use soap and a little ammonia and turpentine to clean the tiles to make the tiles more shiny. If there are marks such as cement, they can be erased by gently rubbing them with hydrochloric acid.

When cleaning the newly renovated floor tiles, the first step must be to use a broom to clean up the dust, and then splash water to wash, if it is a wooden floor, use a wet rag to wipe the dust.

The second step is to sprinkle laundry detergent or dish soap in batches, slightly moisten the water with a rag next to each other, and wipe it carefully and carefully, not letting go of the corners.

The third step is to use soap and a little ammonia and turpentine to clean the tiles to make the tiles more shiny. If there are marks such as cement, they can be erased by gently rubbing them with hydrochloric acid.

It is best to find the merchant again after cleaning, and re-wax the wooden floor to prolong its service life. Pay attention to moisture-proof in the gaps of floor tiles, and it is best to do a little waterproofing, otherwise it will lead to mold, etc.

1. For glazed bricks, the glaze layer of the brick surface is a very dense substance, colored liquid or dirty things will not penetrate into the brick body, the pollutants of the brick surface can be removed by wiping the brick surface with a rag or adding some washing spirit, if it is a tile with a strong sense of concave and convex, the uneven gap squeezes a lot of dust, use a brush brush, and then rinse with clean water to remove the dirt on the brick surface.

2. Dirt cleaning method of vitrified bricks:

For vitrified tiles, the following corresponding cleaning agents can be used to clean up the contaminants commonly used in the household:

1) Pollution type: daily cleaning.

Cleaning method: You can use a cloth, and then use dish soap and soapy water to clean it.

2) Pollution type: tea, ice cream, grease, beer.

Cleaning method: You can use soda ash solution to clean it.

3) Pollution type: sediment, rust, mortar.

Cleaning method: Use sulfuric acid or hydrochloric acid solution. Drop it on the brick surface, let it stand for a few minutes and then wipe it, taking care to protect your hands.

Amway has a special tile cleaner that works quite well! If lime, putty powder, and white latex drip off the brick surface, use a blade to carefully scrape off.

4) Pollution type: paint, drawing pen.

Cleaning method: You can use turpentine, acetone to wipe, and the toothpaste used at home also has a good stain removal effect.

5) Pollution type: soy sauce, vinegar, carbon powder.

Cleaning method: The effect of using toilet cleaner is better.

6) Contamination Type: Ink.

Cleaning method: You can use Amway tile cleaner or toothpaste.

7) Pollution type: sediment, rust, mortar.

Cleaning method: Use sulfuric acid or hydrochloric acid solution. Drop it on the brick surface, let it stand for a few minutes and then wipe it, taking care to protect your hands.

Amway has a special tile cleaner that works quite well! If it is lime or dripping brick surface, use a blade to carefully scrape off.

Is there a stain on the surface of the floor tiles? Then use 84, if not, wipe the steel wool lightly.

The quality is not good, and the bricks with poor stain resistance are like this.