What should I do if the tile absorbs color? The tile can t be wiped off if it absorbs color, how sho

Through the floor tiles. One of the differences with high-grade floor tiles is whether the surface has been well sealed. The surface of ordinary tiles is full of pores, which have a strong adsorption force for colors and stains. It's hard to get rid of it. High-quality tiles, especially high-grade polished tiles.

It has been sealed during production, and the surface is not easy to be stained. The surface you bought has obviously not been sealed, accidentally dripped with soy sauce, ink or something, not wiped off in time, and has penetrated into the brick after a while, at this time, it is difficult to wipe off according to the conventional method, and over time, it has become a stubborn trace that has not faded for many years.

Generally, for the tiles that have not been closed, in the later stage of decoration, at least before moving in, it is necessary to apply the tiles, especially the joints, with a special transparent sealing solution to avoid color immersion or water permeability.

What if you have a color? Go to the pharmacy and buy a substance called "hydrogen peroxide."

or "hydrogen peroxide."

The potion is dipped in this potion with absorbent cotton, and then applied to the color stain, covered with a plastic sheet, and after a few hours, after the liquid is dry, wipe it off. If the problem is severe, it needs to be cleaned with a tile cleaner, and descalers containing phosphoric acid or other acids can also be effective. Be careful not to use too much, it will turn white.

If the area is too large, it will turn yellow after a long time.

If hydrogen peroxide does not work, it is recommended to use a stone-specific product, such as a strong concentrated cleaner, with a pH value of about 1. This type of product can decompose organic contamination on the surface of the stone and remove surface protectants. If necessary, the cleaning agent can be mixed with a decontamination powder, which prolongs the reaction time of the compound and adsorbs the stain into the paste.

Before using the compound, test small areas that are inconspicuous such as wall corners and make sure that the surface of the stone is not covered with dark flower marks. Removing minor scratches is relatively simple, and there are many polishing powders on the market**. However, when using polishing powder, it is often necessary to use a polisher or a single disc machine.

Floor tiles generally do not absorb color, unless the glaze is not good, in which case, it is difficult to clean. 84 can be used to fade, but there is no guarantee that it will not be dyed again in the future. Therefore, in the future, you must not let colored liquid wine on the floor tiles.

Floor tile cleaning guide.

1. Daily cleaning: The daily cleaning of polished tiles can be cleaned with water and detergents, such as detergent, soapy water, etc.

2. Polished brick scratch treatment: the polished brick floor should be kept clean frequently, the dust and gravel should be removed in time to prevent abrasion of the brick surface, when there are slight scratches on the surface of the polished brick, a little toothpaste can be applied to the scratches, and the scratches can be wiped repeatedly with a soft dry cloth, and then the floor wax can be applied to make the tiles as bright as new.

3. Special pollutant cleaning method: After the surface of the polishing tile is polluted, it should be wiped with a soft cloth immediately and rinsed with water.

If the tile factory Xerox is not enviable, we can add baking soda and vinegar to the water to mix, and then use a rag to dip the water to wipe the tiles.

What should I do if I can't wipe the color on the tile 1. Hydrogen peroxide book: Apply hydrogen peroxide to the dyed tile, cover it with a layer of plastic film, and wipe it clean with a cloth after the medicine is dry. 2. Tile cleaner:

Dilute the detergent with water, pour it into the place where the tile has color absorption, and then scrub it with a blank cloth. 3. Special detergent: spray it on the color absorption, wait for about five minutes, and scrub it clean with gauze. Fu Jing.

We can dispose of it with toilet paper and detergent. Cover the surface of the tiles with toilet paper first, then spray detergent on them, wait a few minutes, and the first locust will stick all the grease stains. Then tear off the toilet paper and scrub it with a clean wiper Sakura Tomo cloth.

Spray the limb letter first, wipe it with a cloth for a few minutes, and finally spray the imitation wheel in the foam detergent to wash it clean, first wash it with alkaline (dry laundry detergent add a small amount of water, wash the hungry dates with a steel ball), no, wait until it is completely dry and wash it with an organic solvent.

Summary. Hello, I will solve your doubts for you below, I hope it can help you.

Kiss, how to deal with the color on the tile can not be wiped off, if the area is not large, you can use vinegar to smear, you can also use an eraser to wipe. After 15 minutes, wipe it back and forth with a rag to wipe it clean, and finally wash it again with a wet rag, so how to deal with a large area? Anhydrous alcohol can be purchased from rosin perfume or drugstores, put a few drops on it, and wipe it off after 5 minutes.

Finally, wipe it a few times with a damp rag. I really hope I can help you, and I wish you happiness every day!

The tile can't be wiped off if it absorbs color, how should it be cleaned?

Hello, thank you for your consultation, I will provide you with services to solve your doubts, I have seen this problem of yours, and I am sorting it out, Zen laughter will be sent to you as soon as possible, please wait patiently for the little sister for a while, please [Heten Caution].

I've bought a tile cleaner and washed it for a long time, but it still hasn't been washed off.

It's all this white.

The primary color is this color.

Hello, I will solve your doubts for you below, I hope it can help you. Kiss, how to deal with the color on the tile can not be wiped off, if the area is not large, you can use vinegar to smear, you can also use an eraser to wipe. After 15 minutes, wipe it back and forth with a rag to wipe it clean, and finally wash it again with a wet rag.

Anhydrous alcohol can be purchased from rosin perfume or drugstores, put a few drops on it, and wipe it off after 5 minutes. After patting the beam, wipe the lead with a damp rag and transport it several times. I really hope I can help you, and I wish you happiness every day!

I've washed it with vinegar before and it still hasn't been washed off.

Kiss, you look like a little scratch.

You need to determine what caused it before you find a way to do it.

1. Wash with warm water. After finding that the tile absorbs color, you can pour a basin of warm water in time, add cleaning agent to it, and then take a rag to dip an appropriate amount of warm water, wipe the color-absorbing part repeatedly, and wait for the tile to dry after the original color can be restored.

2. Use hydrogen peroxide. Hydrogen peroxide has the effect of oxidation and also has a reducing effect, the prepared hydrogen peroxide is applied to the color-absorbing part of the tile, and after standing for about three hours, it is dried with a clean empty rag bucket, and the tile will no longer absorb color.

3. Apply floor wax. After curing, the floor wax can be better dustproof and non-slip, and play a role in protecting the floor. Apply the prepared floor wax to the floor with a clean cloth and wait for the floor to air dry to avoid re-absorbing the color.

Spray the water on the head first, wipe it with a cloth for a few minutes, and finally spray foam detergent to clean it after washing, first wash it with alkaline (dry laundry detergent plus a small amount of water with a steel ball), no, wash it with organic solvent after it is thoroughly dry (such as gasoline, banana water, etc., but you must turn on a large fan to ventilate and prevent fire), and then cover it with a dark paint. As a professional engaged in home decoration bricklayer for me, in fact, it is very simple, with a wet hand towel dipped in the cement surface to wipe it is very good, decontamination is particularly fast, practical, this is I in the customer's old building kitchen decoration, in a hurry to come up, it is indeed practical, the effect is good, try to know.

<> it is recommended to replace, or not to use environmentally friendly paint brushes, which cannot be removed at all, and what is the brick wall after a long time, it is not so easy to think about the beginning of the Qing Dynasty. First of all, it will reduce the clearance height of our home by about 5cm, and the clearance elevation of our current buildings is basically about meters, so that it is reduced by 5cm, and you will find that the home will look very depressed; When decorating, the bathroom was tiled like most homes, and it was too slippery to use for a while, and you had to be careful in bathing. If you want to re-lay the bricks, it is too troublesome to pry the bricks and re-pave, and you want to lay new bricks directly on the tiles, but the neighbors said that this will cause the old tiles to be damp and hollow, and it will be more troublesome to renovate them later.

Third: whether you can directly pave tiles on the previous tile, but also according to the actual situation of the decoration site, look at the current tile level and the height of the entrance door threshold, if you do not consider these factors, insist on paving tiles, paving on the previous tile means that the indoor horizontal line is increased by at least 5 cm, if the height of the tile is higher than the threshold, the door can not be closed at that time.

It is recommended to mix the flour and dish soap into a paste, rub it repeatedly with a steel wool ball (to prevent scratching the glaze), and dry it with a wet towel after it is removed. You might as well try the easiest way is to mix oil fume stain remover with laundry detergent, or alkaline noodles, (pour a basin of hot water into the fume stain remover, a little laundry detergent each) with a clean cloth dipped in its water and wipe it back and forth a few times, soak it for a while. Wipe it again and you'll be clean!