It is difficult to clean the limescale in the fish tank, what should I do?

The limescale in the fish tank is difficult to cleanIt can be scrubbed little by little with a paper towel toothpaste.

Every time you change the water,Mix tap water with purified water.

With a cleaning ball, scrub vigorously, then keep the fish tank clean and wipe clean with a dry rag.

Can use someBaking sodaRemove limescale from the fish tank.

1. <> with paper towels and toothpaste

My friend's family raises fish, which is also the kind of small goldfish, because he doesn't dare to play with the expensive ones, the big ones are not good, and the living environment in the fish tank is also very demanding, so he buys the small goldfish for the children to raise and play.

Wash the stubborn scale directly with toothpaste, then quickly wipe it off with a paper towel, and finally clean it with clean water, which must be thoroughly cleaned, because the fish also have high requirements for the water in the tank.

2. Use a steel wool ball to wipe the fish tank with a very thick scale, this is because there are a lot of heavy metals in the water, and the kettle we usually use to boil water will also produce such a serious scale.

Therefore, use steel wool balls to wipe repeatedly, and you must pay attention to the strength during the wiping process, if the action is too violent, it is easy to damage the fish tank.

There is some scale, because of the long time, so it is relatively thick, and it takes some effort to wipe it several times with a steel wool ball.

After wiping, wipe it clean with a dry towel to keep the inner wall of the fish tank very clean, and do not leave a steel wire, which is easy to hurt the little goldfish.

3. Every time you change the water, mix tap water and purified water together, because the hardness of pure water is 0, and the chlorine contained in tap water.

All kinds of metals are relatively high, so if you come directly to the small goldfish, there will be heavy scale left on the inner wall of the water tank.

When changing the water, you can mix the tap water with pure water, which can effectively alleviate the problem of scale in the fish tank.

We have been told that we can also put water softening resin in the lauter tank, which can effectively alleviate the problem of limescale formation.

4. Baking soda can also effectively remove limescale, as well as vinegar <>

The scale in the fish tank is difficult to clean, tell you a small way, with baking soda, you can remove the scale.

If you use alkali to steam steamed buns at home, you can also use alkaline noodles.

To scrub the limescale in the fish tank, this method is also very good.

This is the same as the tea stains on the water cups at home.

Or scale is the same.

A friend said to use citric acid.

Or vinegar, these can be used to remove these scales very well.

The formation of scale is the result of accumulation, so we must be a person who loves cleanliness and hygiene, and the scale will be reduced.

The dirt in the fish tank can be detergent added with white vinegar in a dose of white vinegar, detergent, water 3:2:1. Then wipe with a towel, and rinse it repeatedly with water after wiping.

If the scale in the fish tank is only used with ordinary detergent, it is difficult to clean, you can buy a special cleaning agent for glass or a special cleaning agent for the fish tank, their decontamination effect will be more powerful.

In this case, you should go to the store to buy some descaling medicine, then pour it into the fish tank to soak, and then add some detergent to wash it.

I am happy to put some vinegar, put some acidic things to get rid of it, because scale is generally an alkaline substance, neutralized with acid and alkali, you can add scale to clean up.

You can choose to use some baking soda with vinegar, which will wash off these scales.

You can buy some fish tank cleaning agents to clean the fish tank to a certain extent, which is easier to take care of, or you can also change a fish tank.

Adding some cola and baking soda to the water makes it easier to wash out the gutter.

Tricks to remove limescale from fish tanks.

If you want to clean the limescale in the fish tank, you need to first remove the fish inside, then drain the water inside, and then slowly wipe it off with a tool such as a magnetic brush. If the adhesion is strong, you can dip a little baking soda on it, which will make it easier to clean up. It is usually necessary to clean it once in a regular manner, otherwise the scale will increase and the adhesion will become stronger and stronger, so it will become difficult to clean it again.

If you want to clean the limescale in the fish tank, you need to first remove the fish inside, then drain the water inside, and then slowly wipe it off with a tool such as a magnetic brush. If the adhesion is strong, you can put a guess on the argument with a little baking soda, which will be easier to clean. It is usually necessary to clean it once in a regular manner, otherwise the scale will increase and the adhesion will become stronger and stronger, so it will become difficult to clean it again.

1. High water hardness: The main reason why there is scale is that the hardness of the water is too large, and the scale is the result of the accumulation of various trillion impurities on the cylinder wall, so if you want to clean it, it is best to start from the source and change it to some cleaner water. However, most fish farming is done with tap water, and there are few alternatives.

2. Cleaning is not diligent: there is no scale when you first start raising fish, usually do not pay attention to cleaning, scale will appear, and will accumulate more and more, in order to avoid this situation, you must usually use a magnetic brush to wipe the fish tank, so that you can also remove scale.

3. No trapped water: scale is the impurities in the water, if you want to reduce impurities, the best way is to trap the water, as long as the water is dried for a period of time, the impurities will sink to the bottom, only pour the water above when changing the water, and the last impurities are left, which can also prevent the formation of scale.

Toothpaste cleaning: Limescale on the fish tank can be cleaned with toothpaste, as toothpaste has a good effect on water stains and stains on the glass. The breeder can use a soft towel dipped in a little toothpaste and gently wipe it back and forth, so that the limescale can be well removed.

Citric acid cleaning: If there are still fish in the tank, you can use citric acid and water to wipe it, because citric acid generally does not affect the fish.

Sponge wiping: You can also wipe it directly with a sponge dipped in water, and it can also be wiped off.

There are algae in the fish tank, and the keeper can choose to breed a few fish that eat algae, such as black flying foxfish, scavenger fish, elf fish, moss ratfish, etc., these fish have the habit of eating algae, and can clean all the algae in the walls and crevices of the fish tank. If there are no fish in the tank, you can add algaecide directly, which can kill most of the algae directly. After the algae has fallen off, the keeper needs to use a fishing net to fish it out, or they can open the filter to suck the algae out directly.

1. Generally speaking, this situation will not be obvious in the aquatic plant tank with CO2, because CO2 makes the water weakly acidic, which can just neutralize the calcium carbonate attached to the cylinder wall, so as long as the water level is flooded with scale, the scale will naturally disappear, but if you habitually add the water level to the position near the top of the tank like me, because the water level can no longer be higher, it is difficult to flood the scale left before, and it will still cause the problem of scale adhesion in the long run, so it is still necessary to clean moderately. However, players should be very clear that the adhesion of this scale is really not covered, and if you want to be hard with it, I am afraid that it will hurt the aquarium, so you still have to use the right cleaning method.

2. It is recommended to use citric acid to clean, the citric acid used in this food can be bought in general hardware stores, usually used to clean the hot water tank of the water dispenser or the scale of the hot water kettle, because it is an acidic substance, just to neutralize the scale (calcium carbonate), so it is also very suitable for cleaning the scale on the aquarium. Add some citric acid to water to mix, and then use white cotton to dip this acidic water on the scale position of the aquarium, especially remind me, gently smear, do not need to wipe hard, because it will automatically dissolve the scale, excessive wiping is easy to scratch the tank wall, and the scale will disappear quickly after smearing back and forth several times. However, you may be worried about whether the citric acid water flowing into the aquarium will cause negative effects, in fact, there is no need to worry, because the amount of citric acid needed to clean the aquarium is very small, and the citric acid used in this food is diluted again after entering the aquarium, the impact on the pH value of the aquarium is very limited, if you are still worried about this problem, it is recommended to change the water after cleaning, so that the acidity of citric acid has less impact on the water quality.

3. Secondly, scale is generally all alkaline substances, acid and alkali neutralization, so it can be removed with acidic ones, for example, the water in the north is harder, the pH value is higher, and if you don't wipe the cylinder wall for a period of time, you may produce scale. You can choose to clean the water when changing the fish tank, release more water, and dip it in white vinegar with a cloth, but pay attention to not close to the water surface when scrubbing, if it is stained in water, it will be diluted to the tank, and the vinegar does not need to be too much, and then wipe it clean with an ordinary damp cloth that does not contain acidic liquid, and finally add water, and the scale will not be visible as soon as the water level rises.

4. In addition, you can also use baking soda to clean up, clear all the water and fish in the fish tank, empty the bottom sand, add half a tank of water to soak half a catty of baking soda, soak all the places with scale with a damp cloth and soak them, soak them for a minute, and then wipe them off with a steel wool ball, which is also a good choice.

Commonly used acids are acetic acid and citric acid, acetic acid can be used with white vinegar, pour it on the scale and wipe it. Water softening resin: The best way to treat scale is to use water softening resin, which has the effect of reducing the hardness of the water body.

Fish farming solution: raise some tool fish with a more miscellaneous diet, they can also eat scale. <

The best way to clean up limescale from a fish tank is to clean it with toothpaste. Prepare a clean cloth, squeeze some toothpaste on it, and apply it to the limescale area to wipe it off, and it will be wiped off in a while. It should be noted that it is best to remove the fish before wiping and at the same time drain the water inside, so that it will not cause any effects.

Since the scale in the fish tank is usually alkaline, it can be treated by acid and alkali neutralization. Commonly used acids are acetic acid and citric acid, acetic acid can be used with white vinegar, pour it on the scale and wipe it. Regardless of the type of acid, it will change the water quality when it enters the fish tank, so it is best to clean it up before putting the fish back.

The best way to deal with scale is to use soft water resin, which reduces the hardness of the water body, and the ions in the water will be adsorbed away, so as to avoid the generation of scale. It should be noted that the water softener resin will fail after a long time, and it needs to be replaced at this time, otherwise it will not work.

In addition to the above methods, there is also a way, which is to raise some tool fish with more miscellaneous diets, which can also eat scale. However, it should be noted that before attracting fish into the tank, it is best to pay attention to disinfection and sterilization to prevent them from bringing harmful bacteria into the fish tank.

Use a magnetic brush to brush hard inside the fish tank to brush off scale.

The fish tank should be changed regularly and cleaned frequently. Most of the scale formed due to the hardening of the water is alkaline, and you can pour some white vinegar to neutralize it when cleaning the water tank, which can effectively remove the scale on the glass tank wall. The use of nitrifying bacteria can also dissolve the dirt produced by fish metabolism, which can help us better clean the fish tank and maintain the cleanliness of the fish tank.

Using a magnetic brush, it can also be used to clean limescale well, and the operation is simple, convenient and fast, and you can buy it by asking at the aquarium store. After cleaning the water tank, don't forget to clean the filtration system and disinfect the water tank.