How to clean the newly bought fish tank stones, and what to clean the fish tank with

When we clean the stones of the newly bought fish tank, we put the bottom sand and decorative stones into a bowl or basin, and then take them to the faucet to wash, shake the basin while putting water, and we can also scrub the bottom sand and stones with water, knowing that the water flowing out of the basin is clear. For the first time, you can wash it without running water, in order to save it, wash off the bottom sand and the large mud and dust of the stone, and then wash it with running water.

What to do with the newly bought fish tank and small colored stones:

Step 1: Cleaning the tank. Water pumps, oxygen stones, ceramic rings, filter cotton, biochemical cotton and other supporting facilities in the tank are put into the fish tank full of water and soaked in salt, and the salt concentration is three percent into the soaking for one day.

Step 2: Wash the tank with tap water. Wash it several times, clean the corners, and clean the supporting facilities.

Step 3: The fish tank is filled with water and all the equipment is running. After 24 hours of operation, the water pump and oxygen pump are observed according to the water quality of the tap water in each place, and nitrifying bacteria can be put into the filter if possible.

Dry powder;If a large number of blisters are found on the cylinder wall and equipment, they can be removed manually.

Step 4: When there are few or no blisters in the tank, you can put in the fish. Feed a small amount on the first day, and then feed normally for the next few days.

Theoretically speaking, although the new fish tank filter material we bought may have a little peculiar smell, it should be non-toxic, unless you buy a copycat version of the filter material.

Although the new filter material is non-toxic, it will definitely affect the stability of water quality when put directly into the fish tank. The new filter media is shipped to us from the time it is produced to the time it leaves the factory, so we still need to clean it before putting it in the fish tank.

The stones in the fish tank are mossy due to sunlight and light. Regular cleaning is beneficial to improve water quality and beautify fish tanks. The method of cleaning is as follows:

Soak. Put white vinegar in the water and soak the stone in acidic water. Moss or black-brown dirt formed by light is alkaline, and acidic water can produce acid-base neutralization, which is conducive to removing dirt and moss.

Scrub. After soaking the stone in water for 2-4 hours, scrub the top surface and crevices of the head with a stiff brush, thoroughly removing dirt and moss.

Cleaning. After brushing the stone, rinse it with water 2 or 3 times, the stone gives off a clear luster, that is, it is clean.

Stacking. Finally, according to personal preference, the stone is placed back in the fish tank and made into a certain shape.

When cleaning the fish tank, we can use physical cleaning, use a fish tank brush, brush the inner wall of the fish tank, and if there is scale or algae moss that cannot be brushed off, you can manually wipe it with a rag. In the process of cleaning, a very important problem is not to use any chemical detergents, such as soap, etc., otherwise it is the fish that suffers, and it should be noted that when cleaning the fish tank, try not to clean the filter material at the same time, so as not to affect the nitrification environment in the fish tank.

If the scale is difficult to remove with a tank brush and other physical methods, then we can also use another method, the natural enemy of scale is white vinegar, you can use some white vinegar solution to scrub and clean, we prepare a napkin or a rag, pour a little white vinegar on it, or attach a napkin to the inner wall of the fish tank. Allow the white vinegar enough time to dissolve the dirt, and finally a small brush can also wipe off the dirt with a rag.

If there is brown moss and green algae attached to the inner wall of the tank, biological removal is the most reliable method.

Tool fish such as scavengers and bearded sails, as well as tool snails such as military cap snails, are the safest, but if brown moss algae are prevalent, it is difficult for organisms to restrain them.

After removing the impurities, scale and algae inside the fish tank, it is best to carry out a simple brush on the tank body, and then change the water a small amount to avoid a small amount of white vinegar solution or garbage impurities entering during the cleaning process and thus affecting the water quality.

Take a little hydrogen peroxide, add water, add washing powder, stir evenly, soak for an hour, and scrub with a brush. After washing, rinse with water several times to disinfect, sterilize, remove moss, and remove stains.

The most important thing is not to let the sun shine directly on the fish tank, because the algae grow through photosynthesis, and the second is to raise some fish that eat algae, if you raise a large fish bare tank, it is recommended that you buy two scavengers, raise a small fish grass tank It is recommended that you buy some moss rats, kissing fish, etc., and another is that the filtration system should be cleaned frequently, so as not to affect the filtration effect.

It is common for small stones in the fish tank to grow some moss, as long as there is no large amount of filamentous moss, there is a thin layer of short hair moss to add color to the fish tank, and it can also set off the body color of the fish, so that the body color of the fish is more gorgeous. If there is indeed a large amount of moss, remove it and prevent it from happening again. There are usually several ways to remove moss:

1. Adding a moss remover to the water can kill the moss in a short period of time and inhibit growth. The moss remover does not hurt the fish, and if there are aquatic weeds, it is necessary to pay attention to control the dosage.

2. Breeding shrimp, moss, rats, and scavengers help to eat moss. But it doesn't work on all mosses, they only like to nibble on the kind they like.

3. Change the water frequently, the purpose of water change is to reduce the nutrients in the water, which can effectively inhibit the growth of moss. If there is too much sediment and bait in the water, the water will become eutrophicat, and moss will easily grow.

4. The fish tank must be kept out of direct sunlight. Sunlight encourages moss to grow quickly.