What is the choice of float and drifting skills for silver carp fishing with hand rods? What are the

In the process of fishing for silver carp with a hand rod, the drift is adjusted according to the speed of the current, and the float usually moves up and down, and then sinks suddenly, which means that the fish has been hooked.

It is necessary to choose the right fishing rod and choose the right water layer, and the more common ones are floating and powerful, and the float moves up and down in a small way.

You need to pay attention to the surrounding environment, you must pay attention to the surrounding environment, pay attention to the situation of the fish, so that you can make better adjustments, you need to pay attention to whether there are fish bubbles around, whether the float is moving.

First, the selection of drifting skills.

1. There are many types of floating, and the materials and shapes are also different. If you want to fish for floats, you first need to choose a float that eats lead, so that the relatively large silver carp bait can be suspended in the water, so eating lead is the first point.

2. Considering the turning speed of the float, the float with a fast turning speed is more suitable for fishing, because the float can be clear after standing and whether there is a fish mouth. The float that turns over quickly is usually the float with heavier feet, such as long carbon feet, or bamboo feet or even steel feet.

3. When fishing floating, it is usually not waiting for the float to be in place to have a fish mouth, and there will be more intercepts, so it is necessary to choose a float with a long tail to sink, so that the float will sink slowly after standing, and the long sinking time of the drift tail will be long, and if there is a cut-off, it can be reflected on the float. There is a very typical drift phase in the floating fishing of silver carp, that is, the float that should be descending slowly, suddenly does not move, the reason is that the cut of the silver carp drags the bait, causing the float not to sink, the fish rate in this kind of drift is very high, if the drift tail is short, this drift phase is not easy to catch.

4. Fishing for silver carp needs to pay attention to the influence of the wind, and to reduce the influence of the wind, the cross-sectional area of the float needs to be considered, so the slender body is more suitable. There is also a float that is long underwater, and it can also have a certain windproof effect, such as a 40 cm float that exposes 2 meshes, and a 20 cm float that also exposes 2 meshes, and a 40 cm float has a stronger windproof ability. In addition, the float of the steel foot also has a certain windproof effect.

Therefore, floats can choose: eat lead, slender body, long tail, and long carbon feet, or eat lead, slender body, long tail, and steel feet. Both of these floats are more suitable for floating silver carp, and in general, the whole float is relatively long.

When the bait is in place, the bait will quickly absorb water and atomize, the bait will gradually become lighter, and the number of floating meshes will gradually increase, which is a normal change law. When there is an "unconventional" action, it is basically a silver carp bite. For example, if the float that originally floated slowly stopped, it means that the hook has been entered.

Or the original sinking float, suddenly stopped or accelerated, it also means that there is a fish eating the hook. However, when floating fishing for silver carp, the most classic drifting phase is Xiaodunkou. After the bait is atomized, the fine particles sink slowly, and the silver carp enters the nest and gulps "water" to filter the food, and drinks the hook hidden in the food layer into the mouth.

If there is a mouth, but the fish is not hit, it is usually because the fishing is shallow; If the anchor fish appears, it means that the water layer where the fish is located is relatively shallow, which means that the water layer of the fish is deep.

See whether the drift is clear and other aspects. First of all, the amount of lead must be large, because although the bait used when fishing for silver carp with a hand rod has a light specific gravity, but for the needs of atomization and false nests, the bait is often larger, so in general, the bait is still relatively heavy. Floats that eat a small amount of lead are naturally not suitable for fishing.

Summer is the best season for bighead carp fishing, and even the exposed medium fish can still catch bighead carp. Summer fishing, morning and evening fishing for bottom herring, carp, crucian carp, and "garbage time" at noon to catch silver carp is estimated to be the routine of most anglers. It can be said that the silver carp is a very good fish, and the main way is to enter the nest in a group, and it is not impossible to catch fish on the rod.

Introduce the selection and drifting experience of silver carp floating, as well as the common drifting problems of silver carp, hoping to help all anglers.

Find the bottom: first hang the double hooks, adjust the distance, and then Gao Qin hangs the lead pendant on the hook below. Then let the fish float sink into the water, adjust the fish float to rise, and stop after the tip is exposed to the surface.

Trimming the lead skin: By trimming the lead skin, it is more appropriate to let the drift tail expose the surface of the water, about 8 meshes. Hanging bait:

Hang the bait and let the float re-enter the water, at this time the state of the float may change, and the weight of the lead skin needs to be adjusted so that the float is exposed about 2 meshes. <

Silver carp is one of the fish species that can be fished, and it is one of the main freshwater fish species living in our country. Fishing for silver carp should be prepared in advance, including fish floats. There are many factors that need to be paid attention to when choosing a fish float.

For example, when fishing for silver carp, it is best to use a float with a thinner tail but a slightly thicker body.

Another example is color, it is best to choose a more brightly colored fish float, so that their color can also attract silver carp. In addition, the amount of lead eaten is also one of the important factors that need to be paid attention to, and when fishing for silver carp, it is relatively necessary to prepare to eat a relatively large amount of lead drift. In addition, there are factors such as material and **, all of which must be paid attention to and comprehensively select the most suitable drift.

As mentioned above, fish drift is one of the important fishing gear and needs to be prepared in advance. After getting ready, there is another important step to adjust the drift:

1. Find the bottom: In many cases, double hooks are used for silver carp fishing. The first step in the drifting process is to find the bottom.

Hang the double hook first, and adjust the distance between the two hooks. On a hook underneath, hang the plumb pendant. The fish floats are then thrown into the water and let them sink in the water.

After that, adjust the position of the fish in the water and let them slowly rise until the tip is above the surface. At this time, the bottoming is not particularly accurate, but it can basically meet the requirements.

2. Pruning the lead skin: Then there is the process of trimming the lead skin, through which the adjustment can be adjusted. Fishing for silver carp can be controlled at about 8 mesh at this time.

3. Hanging bait: Then, you need to hang the bait on the double hook. After the bait is hung up, the state of the fish floating in the water may change.

If the change is very large at this time, you need to continue to adjust the weight of the lead skin. It is time to stop until the float is about 2 mesh out of the water.

The correct drifting method for silver carp fishing with hand rods:

1. Choose the right drift.

Choose the right drift according to the depth of the water and the current conditions of the fishing spot. Generally speaking, when fishing for silver carp, you can choose to float or sink the bottom of the raft.

2. Adjust the buoyancy of the float.

Adjust the buoyancy of the float according to the depth of the water at the fishing spot and the depth of the fish's activity. Generally speaking, silver carp are more active in the water and should float slightly more buoyant to better trigger the bite response of the fish.

3. Adjust the position of the drift.

Place the drift on the fishing line and adjust the position of the float according to the depth of the fish's activity. Generally speaking, silver carp are more active in the water, and the drift position should be slightly closer to the bottom of the hook to better trigger the bite response of the fish.

4. Adjust the sensitivity of drifting

Adjust the sensitivity of the drift according to the current conditions of the fishing spot and the bite strength of the fish. Generally speaking, the bite force of the silver carp is lighter, and the sensitivity of the drift should be moderate to better observe the action of the fish bite.

5. Observe the action of drifting.

After adjusting the position and sensitivity of the drift, observe the movement of the float. Generally speaking, the bite action of the silver carp is relatively slight, and the floating action should be a slight up and down or swaying.

6. Fish according to the action of drifting.

According to the action of the drift, reasonably control the swing of the fishing rod and the speed of the reel, so as to better trigger the reaction of the fish bite. Generally speaking, the bite of silver carp is relatively slight, so you should be patient when fishing and wait for the fish to bite before lifting the rod quickly.

Tips for fishing for bighead carp:

1. Adjust the color of the drift.

Depending on the water quality and light conditions of the fishing spot, choose the appropriate drift color. In general, light-colored floats are more likely to be noticed by fish in clear water, while dark-colored ones are more likely to be noticed by fish in cloudy water.

2. Adjust the weight of the drift.

According to the current situation of the fishing spot, choose the appropriate drift weight. If the current is larger, you can choose a heavier drift for better control over the position and stability of the float.

3. Adjust the length of the drift.

The length of the drift is adjusted according to the depth of the water at the fishing spot and the depth of the fish's activity. Generally speaking, silver carp are more active in the water, and the length of the drift should be slightly shorter, so as to better trigger the bite response of the fish.

4. Observe the floating state of the float.

After adjusting the position and sensitivity of the float, observe the float state of the float. If the drift remains on the surface of the water, it may be because the float is too buoyant or the line is too thick, you can adjust the float appropriately or use a thinner line.

5. Adjust the fishing strategy according to the action of drifting.

According to the action of the drift, reasonably control the swing of the fishing rod and the speed of the reel, so as to better shout and trigger the response of the fish bite. If the drifting action is more violent, it may be because the fish bites the hook strongly, and the speed of the reeling can be appropriately accelerated.

The tips and methods of floating carp fishing are as follows:

1.Find the bottom.

Fishing for silver carp should first hang a double hook, and ensure that the distance between the two hooks is about 10cm, and then hang a heavy lead on the lower hook, and then try to float the fish to the hook, so that the fish float completely sinks into the water, and then gradually move up the float until the tip of the drift is exposed, which means that the bottom is found. Finding the bottom does not need to be very precise, the approximate location is sufficient.

2.Cut the lead skin.

Anglers keep trying to subtract the lead until the tail of the float is about 8 mesh out of the water.

3.Hang the bait to adjust the drift.

Although it does not need to be as fine as the drift of the platform fishing, anglers should also pay attention to the fact that they must hang the bait to adjust the drift, so as to ensure that the bait is suspended in any water layer. If the float sinks too much after hanging the bait, the angler should continue to cut the lead skin until the float is exposed to the surface of the water.

You need to expose half of the drift tail to the water, of course, it is best to expose all the drift tail, and then hang a big bait, as long as the bait is thrown out, you can not drop it. Lift the rod directly when floating into the water and sink to 2-3 meshes, the whole process should be fast, try not to exceed 15 seconds, and then repeat the above steps at least 15 times, noting that the lower the density of the fish, the more the more. According to the method of watching fish stars, check whether there is a silver carp into the nest, if there is no fish into the nest, then continue the above actions, anglers should pay attention not to use the lead seat bait as much as possible, although the lure of fish is faster, but it will mess up the fish layer.