-
When the bait is in place, the bait will quickly absorb water and atomize, the bait will gradually become lighter, and the number of floating meshes will gradually increase, which is a normal change law. When there is an "unconventional" action, it is basically a silver carp bite. For example, if the float that originally floated slowly stopped, it means that the hook has been entered.
Or the original sinking float, suddenly stopped or accelerated, it also means that there is a fish eating the hook. However, when floating fishing for silver carp, the most classic drifting phase is Xiaodunkou. After the bait is atomized, the fine particles sink slowly, and the silver carp enters the nest and gulps "water" to filter the food, and drinks the hook hidden in the food layer into the mouth.
If there is a mouth, but the fish is not hit, it is usually because the fishing is shallow; If the anchor fish appears, it means that the water layer where the fish is located is relatively shallow, which means that the water layer of the fish is deep.
-
See whether the drift is clear and other aspects. First of all, the amount of lead must be large, because although the bait used when fishing for silver carp with a hand rod has a light specific gravity, but for the needs of atomization and false nests, the bait is often larger, so in general, the bait is still relatively heavy. Floats that eat a small amount of lead are naturally not suitable for fishing.
-
Summer is the best season for bighead carp fishing, and even the exposed medium fish can still catch bighead carp. Summer fishing, morning and evening fishing for bottom herring, carp, crucian carp, and "garbage time" at noon to catch silver carp is estimated to be the routine of most anglers. It can be said that the silver carp is a very good fish, and the main way is to enter the nest in a group, and it is not impossible to catch fish on the rod.
Introduce the selection and drifting experience of silver carp floating, as well as the common drifting problems of silver carp, hoping to help all anglers.
-
You need to expose half of the drift tail to the water, of course, it is best to expose all the drift tail, and then hang a big bait, as long as the bait is thrown out, you can not drop it.
Lift the rod directly when floating into the water and sink to 2-3 meshes, the whole process should be fast, try not to exceed 15 seconds, and then repeat the above steps at least 15 times, noting that the lower the density of the fish, the more the more.
According to the method of watching fish stars, check whether there is a silver carp into the nest, if there is no fish into the nest, then continue the above actions, anglers should pay attention not to use the lead seat bait as much as possible, although the lure of fish is faster, but it will mess up the fish layer.
-
Bighead carp fishing method:
First, the selection of the hook of the line group.
1. The line group generally selects the above large lines and the above sub-lines.
2. The fish hook uses the new Kanto no thorn 1
3. The length of the strand is determined according to the size of the fish, the larger the fish, the longer the strand, and the length of the strand is generally more than 20 cm per piece.
4. The hook distance is placed above two hook distances, which is also determined according to the size of the fish.
Second, the choice of fishing rods.
Hand rod, waist strength should be good, the appearance of four or six tones, and three or seven fishing is also fine. The use of Dijia black carp. The largest has reached the head of 19 pounds, and has never let go of the lost hand rope. The line group used.
3. Nesting method.
Choose a still water area, try to find that kind of haven in windy weather, before fishing for silver carp, you must make a nest, play enough, there is that kind of silver carp nest on the market, you can mix with bran, open the bait basin for most of the basin, a one-time fixed point to lay the nest, look at the density of the fish, as little as five minutes will appear silver carp bubbles, more than half an hour a quasi-silver carp bubbles, then you can rub the bait to fish.
Fourth, the method of rubbing bait.
Rubbing the bait with bait can press down the buoy until the fishing mesh, the fishing mesh is generally not exquisite, 1 2 3 4 5 6 7 mesh and even flat water fishing, as long as it is not on the mesh, which means that there is bait on the hook. Just rub the bait on the hook!
5. Buoy selection.
Large buoys, no matter what type of floating, are not too particular. However, if it is better to drift with short feet and long bamboo feet, it will be faster to turn over and fish more quickly.
Sixth, drifting. Adjusting the drift, the individual generally adjusts the drift shoulder, so that the size of the bait can be controlled.
7. The search for the fish layer.
The silver carp belongs to the pelagic fish, so it is necessary to roughly find the bottom of the river, starting from half of the water depth, if the buoy shakes left and right, or flutters, or the anchor is to the fish when lifting the rod, it means that the fish layer has been found; If there is no mouth, or small trash fish make a nest, it may be too shallow, or the silver carp does not enter the nest.
-
Drifting**, the method is:
1: After the fishing tackle is ready, increase the lead skin, so that the lead seat falls to the bottom, and the fish float is exposed to the water, and the length from the lead seat to the fish float is the depth of the water.
2: Move the fish drift downward, and the general length of the fish drift should be greater than the length of the strand line + the length of the fish drift. At this point, the length from the hook to the tip of the float is less than the depth of the water.
3: Adjust the lead skin so that the fish floats out of the water. If you adjust the four fishing two, it is to adjust the fish to float until the water surface is exposed.
4: Hang the bait and cast the rod, at which time the fish float will sink to the bottom.
5: Then slowly adjust the fish float upwards so that the fish float hook is exposed to the water surface, which is to adjust the four fishing two.
-
A simple and easy-to-learn drifting method for silver carp fishing with a hand pole.
-
The earliest start of suspension fishing is too fishing, the most obvious feature of the tune 4 fishing 2, he has requirements for the size of the specific gravity of the bait, the weight of a bait is the buoyancy of the purpose of floating. Due to the lack of development, Taiwan fishing has gradually been eliminated. You are fishing for silver carp now, you can bring bait to adjust the drift, adjust 2 or 3 mesh, and the depth of the water layer you are fishing for, and push the float to control it yourself.
-
Hand pole float fishing silver carp drifting: fishing silver carp is best to single hook bait, that is, hook bait, anyway, silver carp is sucking will not eat the bait in one bite, single hook bait, the bait on the hook slowly atomizes, silver carp is particularly easy to accidentally suck the hook into the mouth.
In addition, the single hook hook is more convenient and fast, and the frequency of casting the rod is accelerated, which has a better fishing effect. The silver carp eats a large amount of food, and generally the fishing of silver carp also needs to put in more nest bait, and the bait group also needs to be rubbed relatively large;
However, the specific gravity of the bait of the silver carp is relatively light, and the appropriate amount of state bait can also be added to adjust the specific gravity, so the float does not need to be adjusted very high, adjust the 4 mesh to 5 mesh, and the amount of lead eaten by the float is 3 grams.
-
Bighead carp drifting.
Whether it is fishing off the bottom, half-water or deep, the remaining buoyancy of the float is indispensable. Therefore, when adjusting the drift, the tip of the float should leak out of the water after the bait is hung on the double hook. Generally, it can be used to hang bait to adjust the drift.
The method is to pull the float to the half-water position, put the double hook with the bait (the same size as when fishing) and throw it into the den, and trim the counterweight lead skin to make it reach a height of 2-3 goals that the float can still be exposed to the water after hanging the bait.
-
In the process of fishing for silver carp with a hand rod, the drift is adjusted according to the speed of the current, and the float usually moves up and down, and then sinks suddenly, which means that the fish has been hooked.
-
It is necessary to choose the right fishing rod and choose the right water layer, and the more common ones are floating and powerful, and the float moves up and down in a small way.
-
You need to pay attention to the surrounding environment, you must pay attention to the surrounding environment, pay attention to the situation of the fish, so that you can make better adjustments, you need to pay attention to whether there are fish bubbles around, whether the float is moving.
-
Empty hook adjustment: Install the fishing rig except the bait, put the fishing rig into the water, and let the float float float in the water until the float stops about halfway up to the surface of the water after the tail of the float is exposed. Hanging bait tune:
Hang the bait on the hook, re-let the fishing rig enter the water, and when the float sinks to two or three meshes, you need to draw the rod and observe the state of the water. If there are no fish in the nest, it needs to be adjusted appropriately. <
Bighead carp is a fish that can often be seen in freshwater, so it is suitable as a fishing target. There are some steps that are necessary in the process of silver carp fishing, such as drifting. A relatively clear purpose of the drift is to let the fish float send a signal to the angler when the silver carp is hooked, so that the angler can judge that this time is the best time to lift the rod through this signal, so as to lift the rod, so that it is easy to catch the silver carp.
However, there are also skills in drifting, and it is not just a matter of adjusting drifting at will. To make it easier for the fish to send a signal, you need to adjust it in the right way.
As mentioned above, it is best to adjust the drift in advance when fishing for silver carp, so that it is easier to catch silver carp, and you need to take the right way when adjusting the drift:
1. Empty hook adjustment: First of all, you need to adjust the empty hook, that is to say, at this time, do not hang the letter hidden bait on the fish wheel hook, but need to install other fishing groups. The rig is then dropped into the water.
The float should be floated up in the water, and then float until the tail of the float is halfway above the water, and then it can be stopped.
2. Hanging bait adjustment: After that, you need to hang the bait adjustment. If you are using a double bait, you can hang both bait on the hook.
Then re-enter the rig into the water. When the float floats in the water and sinks for two or three eyes, you need to draw the rod and then observe some of the state in the water. If there are fish entering the nest after waiting for a while, then it means that it is okay to adjust the float in this way, and you can continue to keep the float between 2 and 3 meshes.
However, if there are no fish in the nest for a long time, it means that this drifting method is not particularly suitable, and you can continue to adjust it to a certain extent.
-
The specific steps are as follows:
1. Find the bottom of heavy lead. Even if it is a fishing float, finding the bottom can not be omitted, one is to be safe, to ensure that the next few steps are not wrong;Second, it is convenient for us to change the water layer when there is no mouth. The only thing to pay attention to in finding the bottom of heavy lead is to try not to hit the full rod!
2. Pull down to float, pull down twice the length of the strand. How far is the pull-down float going down?Some people say that the gallic line is pulled, and some people say that it is pulled down ten centimeters, which one is right?
In fact, it is all right, the pull-down float is to ensure that the distance from the hook to the tip of the float is less than the water depth! For example, in the picture below, make sure that the rig is in this state in the water before you cut the lead skin.
3. Cut the lead skin to expose some meshes of the float. This step is only coarse, so it doesn't matter how many eyes are exposed on the float, of course, experienced old anglers will directly adjust the whole mesh (because the silver carp bait is relatively large, it can press down a lot of mesh).
4. Hang the bait on a single hook, and then cut the lead skin. For example, in the third step, you cut the lead skin to expose the float to 8 meshes, then when you hang a large bait, you will find that the float is completely dragged into the water again. At this time, it is necessary to cut the lead skin again, and cut the stupidity until the float is exposed to the water again, generally speaking, just show three or five eyes.
How do old anglers generally adjust?
I said the four steps above to make the novice more understandable and organized, some people may find it verbose and think that I have complicated simple things, but I just want to say that you can't use your feelings to measure the feelings of novices, you will certainly find it simple.
If you want to put it simply, it's very easy, for example, knowing that the water depth here is about 3 meters, then I will push the float to a distance of about 2 meters (to ensure that it is less than the water depth), and then directly hang the bait and start cutting the lead skin, so that the float can reveal the desired number of meshes, and that's it.
For familiar waters, if you are a veteran, you can omit many steps, such as the step of heavy lead bottoming. But for novices, unfamiliar fishing spots, finding the bottom is a must, if the fishing point is too shallow, it is not a matter of affecting the drift and finding the fish layer, maybe this is not the position of fishing for silver carp at all!
When floating fishing for silver carp, we should first pay attention to the choice of float, and a suitable float is the key to floating silver carp fishing. At least require a float with a large amount of lead, first of all, only a float with a large amount of lead is suitable for fishing, and secondly, it is easier to cast the rod accurately, and it is often necessary to use a longer rod when fishing for silver carp, and the size of the silver carp will be much larger when fishing farther. >>>More
<>It's summer and the sun is scorching, so many species are not so easy to catch, but the hotter the weather, the easier it is to catch silver carp. So when fishing for silver carp, how should we use bait, and how should the line set be matched? >>>More
The silver carp belongs to the upper layer of the water, and it moves after the food, and there is a real thing** there is a figure of the silver carp. With the developed sense of smell of the silver carp, it is theoretically possible to make a nest anywhere by nesting and frequent rod throwing. Therefore, fishing for silver carp usually needs to consider the water depth and wind direction, the shallow water does not come, the wind is strong or headwind, which is not conducive to the casting of the rod and the formation of three-dimensional dens.
Tianyuan Deng Gang. Float fishing for silver carp.
It is the classic bait of Tian Yuan, which was originally called "gold version of floating fishing silver carp", and later changed to "Tian Yuan Deng Gang floating fishing silver carp" due to trademark reasons, which can be used to pinch bait, rub bait and use hand rods for fishing, and can also use sea rods and rock rods for flower basket bait. >>>More
1. You can't throw a full rod, the rod can't bow up, and it's easy to tug-of-war. >>>More