High rise residences, the basement is damp, what should I do?

If there is only a little bit of damp cold, a very simple way is to suspend some desiccant with strong adsorption in the basement, the most common is activated carbon activated carbon, and you can also sprinkle some desiccant on the road surface in some corners that are very easy to get wet and cold, and you can sprinkle the camphor ball and activated toner powder there to remove moisture, but be sure to replace the desiccant every once in a while.

If the basement is more damp and cold, the following methods can be adopted: install floor heating in the basement Installing floor heating in the basement is one of the solutions for how to prevent moisture in the basement, the effect of floor heating is to make the basement room temperature rise, so that the house is kept dry and not wet and cold, it must be noted that the temperature is too high and the room is too dry.

The basement is a very wet and cold area, so it is necessary to pay attention to many aspects when decorating, and use glazed bricks as much as possible. Wallpaper and other moisture-proof home decoration materials with good practical effect, and at the same time the ceiling of the basement. Wooden floors. Walls need to be moisture-proof.

Improving natural ventilationImproving indoor ventilation is particularly helpful in preventing moisture and can reasonably reduce the amount of moisture in the room. Ventilation and cooling equipment can be modified in suitable places, such as non-driving exhaust fans, which are also a relatively passive exhaust equipment, so the actual effect of exhaust is very limited. It is also possible to install strong exhaust equipment, such as industrial exhaust fans and axial fans, which may have to exhaust the air ducts.

In addition, exhaust fans can also be installed if there are windows and doors, which can save a certain cost.

When the application of household appliances encounters the rainy season, the outdoor environment humidity is relatively large, so it is not suitable to carry out long-term air circulation, and exhaust fans can be used. **Indoor dehumidification is carried out by air conditioners or dehumidifiers. In addition to the application of various household appliances to carry out dehumidification, the application of desiccant can also place some small objects with moisture-proof and dehumidification effects, such as desiccant.

Activated carbon and other moisture-proof in the room.

It must be noted that dehumidifying objects such as desiccant have a certain period of service life and need to be replaced frequently. Basement pavement moisture-proof, pavement moisture-proof is also a part of the basement moisture-proof problem that cannot be ignored. To put it simply, it is to improve the waterproofing of the floor in the basement floor structure.

Simple basement moisture-proof, only need to cover the ground with waterproof material or immediately spray moisture-proof liquid to achieve the purpose of basement moisture-proof. Save time and reduce costs.

In high-rise residential buildings, the basement is relatively humid, we should sprinkle some desiccant in the corner of the basement, make a waterproof, install air conditioner inside, put some shelves, and put some activated carbon can help dehumidify.

Put a little desiccant, usually ventilate more, press a hair dryer, don't put something more moist, you can spray some moisture-removing detergent.

You can lay heating pipes in the basement, you can send underfloor heating, so that it will not get wet in the future.

1. There is moisture in the air, the temperature difference between spring and summer is large, and the moisture is slow to enter, and the condensation caused by the condensation of the cold air is encountered, especially at the junction of the wall and the ground.

2. The waterproof layer of the basement is damaged, and after the rainwater seeps, it causes the first floor or the basement to be damp and mildew.

3. The building is close to the river and lake area, and the basement wall and bottom plate are damp for a long time, which will also cause dampness.

If it helps you,! Thank you!

Hello dear, happy to answer your <>

The basement is very damp and this is done: Method 1: Disperse the tide is to open the window, if there is a window.

The circulation of air in the basement is even more important. Long-term lack of indoor air flow, combined with dark and damp conditions, can aggravate the growth of mold and the like. To speed up the air flow, ventilation equipment can be installed in a suitable position, and ventilation equipment can be divided into two kinds according to power, one is a non-powered exhaust fan, which is a more passive exhaust device, and the exhaust effect is relatively limited.

It is also possible to install strong exhaust devices, such as negative pressure fans and axial fans, which may require exhaust ducts. Exhaust fans can be installed if there are windows. Method 2:

If you absorb moisture, you can use quicklime. It would be better if you piled some quicklime in the corner of the wall. It is important to know that quicklime can absorb moisture and reduce the humidity of the air, so that the air becomes dry and germs are not so easy to grow.

In addition, quicklime itself also has a sterilizing effect. It is possible to hang desiccant indoors. Desiccants have a service life and generally need to be replaced frequently.

Method 3: You can choose a moisture-proof mat when it is moisture-proof. The principle of moisture-proof is actually quite simple, just like wearing an umbrella and a raincoat to block water in the rain.

In the basement, you can lay a layer of moisture-proof mat on the ground, which can play a good role. If not, you can also replace it with foam cushions sold on the street, or you can replace this with cardboard sheets for cardboard boxes, which is cheaper. However, this thing, after using it for a period of time, it should be taken out often to dry, and it is still relatively dry to use.

Method 4: It can be installed with floor heating or dehumidifier, which also has a certain dehumidification effect. Therefore, we recommend that the moisture-proof problem must be considered before the decoration of the basement, so that the comfort of the basement can be guaranteed.

And the cost is relatively low. The problem of basement moisture prevention needs to be considered as a whole, and if it is dealt with before the basement decoration, it will get twice the result with half the effort. And the cost of payment is low, if you choose the right product, the right construction method, basically the basement can be kept permanently dry, without paying the additional cost of continuous moisture protection.

Due to the poor ventilation and lighting effect of the basement, it is easy to get wet. What about the damp basement? PChouse will take you to find out.

1. The installation of floor heating is one of the effective ways to prevent moisture in the basement, which can increase the indoor temperature of the basement and keep it at a certain temperature to keep the room dry and not wet.

2. When decorating, it should be noted that the basement is a relatively humid place, and you can choose wallpaper, vitrified bricks and other decoration materials with good moisture-proof effect. Basement ceilings, floors, walls, etc. are best waterproofed.

3. Strengthening air circulation is helpful for moisture-proof and can effectively reduce indoor humidity. In rainy season, when the outdoor air humidity is relatively high, you can use electrical appliances to dehumidify indoors.

4. The dryer dehumidifies and can place some small items with good dehumidification effect, such as desiccant. Desiccants have a lifespan and need to be replaced frequently.

When it comes to basement space, many people have mixed reviews about it. Those who like basements think that this space is equivalent to a gift, and it is very cost-effective, and it can be used as an activity room, storage room, etc. For those who don't like the basement, they think that it is too damp, there is no lighting and ventilation, and it is difficult to use it as a daily space, so what should I do if the basement is wet?

Let's take a look with Qeeka Home experts.

1. What to do if the basement is wet.

Some moisture-proof materials can be laid in the wall and floor space, such as moisture-proof floor mats, waterproof putty, etc., which can effectively avoid moisture infiltration; Exhaust fans can be installed for ventilation, which can reduce the moisture content in the room; Air conditioners or dehumidifiers can be installed, both of which have a good dehumidification effect; Underfloor heating can also be installed to raise the temperature while keeping the indoor space dry.

2. What is the purpose of the basement?

1. Bedroom. If the basement is dehumidified and moisture-proof, it can be turned into a bedroom, which can effectively improve the usable area of the home.

2. Studio.

In foreign countries, basement studios are very common, because in the underground, the sound insulation effect is good, and if you design it as a studio, you can improve your work efficiency.

3. Garage. If the basement of the home is not very useful, and it happens to be at the entrance, it can be installed and repaired into a parking room, which can not only facilitate parking, but also ensure the safety of the vehicle, prevent theft and damage, and at the same time avoid wind and sun.

4. Wine cellar. It is common to build a wine cellar in the basement, especially for some wines that need to be stored in a dark environment, so it is suitable to be placed in the basement space. At the same time, it is also a bar, for the family to taste wine and use auspiciousness, in your spare time, you can also meet three or five friends, drink tea and chat together.

Summary: The above is about what to do with the basement damp, and what is the purpose of the basement, I hope the content shared can give you some reference, if you want to know more about the banquet bureau, you can **** Qijia information.