What should I do if I find that the wall is not straight after decoration, and what should I do if t

Home decoration is to demolish and renovate, in order to renovate the space, some need to be demolished, and some need to be erected. If the wall is uneven, it will affect the aesthetics visually, and it cannot fit the wall when placing furniture. What should you do if the light wall in your home is not vertical?

How can you tell if a light wall is vertical?

How to tell if the wall is vertical.

The level of the wall is really poisonous and vertical.

You can use a yin and yang angle ruler to detect the squareness of all angles, and the national requirement is not to exceed a deviation of 3 mm.

It is also possible to use a ruler and a feeler gauge.

To test the flatness and levelness of the wall, the national requirement is not more than 3 mm.

How to solve the problem of not vertical approach.

If the flatness is within five millimeters, you can scrape putty.

to solve. Within three millimeters are also accepted criteria.

If the flatness is more than 5 mm, it will be too thick with putty, and the wall will crack in the future. So use cement mortar.

Or a special stucco plaster for wall leveling, between five millimeters and one centimeter is OK.

If the unevenness is between one and two centimeters, you can use stucco plaster to level and then hang a layer of netting, and then use stucco plaster to level the leveling layer, which can prevent the screed.

Too thick can cause the wall to crack later!

If the unevenness is greater than two centimeters, even if it is leveled with hanging nets and cement mortar, there is still a possibility that the back will crack because it is too thick. So you can hit the wooden keel first, and then use gypsum board.

cover method to carry out wall leveling. Although the unevenness of the wall can be minimized in this way, it is too high, and the cement mortar leveling is the lowest.

Most of the light body walls are not vertical because of the workers during construction, and the inclination is not too large, which can be leveled with cement mortar. If the inclination is very large, it is recommended to directly knock down and rebuild the wall from the perspective of safety and aesthetics. Straight walls are more visually aesthetically pleasing and will fit better on furniture!

After decoration, it is found that the wall is not straight, if it does not affect the appearance, it does not matter, if it affects the appearance, let the decoration company rectify it, it.

If you find that the walls are a little out of the vertical when you are renovating your home, don't worry too much, as this is a very common problem that can be corrected in several ways:

1.Use drywall or typography: You can use drywall or typography to fill gaps in the wall and make it look more upright and neat. This mausoleum requires some skill and expertise, so it is recommended that you hire a professional worker to complete it.

2.Adjust the door frame and finishing materials: If you find that the door frame or finishing materials are not perpendicular to the wall, you can adjust them to the correct angle. This will make the entire wall look neater and more symmetrical.

3.Use paint: You can use paint to cover up non-vertical walls. Choose a paint that is the same color as the original wall, and repaint the non-hanging part with rubber straight to make it look smooth and neat.

4.Reinstall the panels: If you notice that the panels on the wall are uneven and not vertical, consider reinstalling the panels. This requires a certain amount of skill and expertise, so consider hiring a professional to do the job.

In conclusion, although non-vertical walls may look a little uncomfortable, they can be fixed with some simple corrections. If you're not sure how to fix this, consult a professional renovator.

Leveling, this is the oilman's job, if the difference is too big, find the developer to solve it.

If the wall is not vertical, it can cause many visual problems in the room and also affect the overall aesthetics of the room. To fix this problem, we can take the following recommendations for acre:

1.Use wall caulk.

Wall caulk can be filled at the elevated corners of the wall. You can use a spatula to evenly fit the caulk into a wide wall gap, then smooth it with your fingers or a spatula and wait for it to dry before sanding.

2.Cover the walls.

This is a much more convenient way to cover the entire wall if there is a serious problem. You can use wallpaper to cover the entire wall and make it look flat.

3.Use lighting to cover up non-vertical walls.

The use of light is a leaky method to compensate for the impact of non-perpendicular walls. By adjusting the direction and intensity of the light, we can divert attention from where the wall is skewed.

4.Decorate objects to distract the eye.

Another way is to place decorative objects such as paintings, wall hooks, wall clocks, etc., which can draw attention elsewhere and thus mask the problems caused by non-vertical walls.

In short, repairing a non-vertical wall is not a complicated task, you can take the above methods, or use a combination of methods, to make the non-vertical wall surface smooth and beautiful.

Banquet imitation 1, first of all, we must be leveled, and it is leveled before the wall is painted, the uneven wall will also give us a visual uncomfortable, the household appliances in the room are installed, the uneven wall will lead to the overall layout of the sense of difference, so it is found that the wall is uneven to the first time into the loss of the rental line leveling.

2. Now most of the decoration is handed over to the decoration company to do, if there is a problem with the wall during the acceptance, you can refuse to accept, and require the decoration company to repair the wall and then carry out the acceptance, we can also check regularly when the decoration company is constructing, and find the problem in time to deal with it.

3. The uneven wall can be divided into three types: local unevenness, large-scale unevenness, and flatness problems, according to these three different situations, we need to deal with them differently.

4. If it is more convenient to deal with local unevenness, you only need to use paint to brush again in the original uneven place, and then use sandpaper to smooth it, so that you can find the fiber level, and you can carry out the next step of painting after the leveling is over.

5. If it is a large area of unevenness, it is more troublesome, because the area is relatively large, there are more places that need to be leveled, and the construction is also more troublesome.

6. If it is a problem of wall flatness, if the error is within 1 cm, putty and leveling can be carried out, if the flatness is more than 1 cm and the area is relatively large, it is necessary to remove the original wall and reuse cement and putty for leveling treatment.

Uneven walls are one of the common problems in decoration, which may be caused by improper construction for new houses, and cracking or settlement of walls for old houses. During the renovation process, if the wall surface is uneven, it will greatly reduce the overall decoration effect, so it needs to be treated.

1. Find the reason.

The first thing to find out is the reason for the uneven wall, whether it is because it was not treated well during construction or because the house is aging. If it is because it was not handled well during construction, you can find the owner or the renovation company to repair it. If it is because the house is aging, you need to understand the reason and repair it.

Second, the treatment method.

1.Tapping ash on the surface of the wall: Use a trowel on the surface of the Gaochan Bridge on the wall to tap the uneven places to make the layers even and symmetrical.

2.Laying wallpaper: Laying wallpaper on the uneven ridge part of the wall is also a treatment method.

3.Use caulk: Use caulk to repair uneven parts of the wall.

4.Repaint: If the uneven part of the wall is relatively large, you can repaint it with a new coat of paint.

5.Wall demolition: If the unevenness of the wall is too obvious, you can consider demolition and reconstruction.

3. Preventive measures.

1.During construction, it is necessary to pay attention to the treatment of the base layer, the wall is polished and cleaned, the surface paint is brushed, and the nail board is pasted, so as to ensure the flatness of the wall.

2.In daily life, it is necessary to maintain indoor air circulation and avoid humidity.

3.When cracking is found, it should be dealt with in time to avoid the expansion of cracks.

4.When the whole wall falls off, it is also necessary to pay attention to it and find professionals to deal with it in time.

In conclusion, uneven walls can be dealt with in a variety of ways, and measures can also be taken to prevent them. Only when you pay attention to the details can you ensure the quality and appearance of the wall, and make the home more beautiful.

Latex paint is more common when decorating walls, but sometimes it may not be straight when painting the wall. What should I do?

First of all, we need to understand the reasons why latex paint is not straight. This can be caused by things like the way the paint is applied, uneven walls, or the quality of the substrate material. To solve this problem, we can do the following:

1.Find out what's wrong: The first thing to do is to find out what is causing the latex paint to not be straight. Is it an uneven wall, a poor quality substrate material, or an improper coating technique? Only by finding the problem can we solve the problem in a targeted manner.

2.Perform pre-treatment: If the wall is uneven, we can sanding or filling in the areas that are not flat. This will flatten the wall and make the paint apply more smoothly.

3.Use professional tools: Make sure to use professional tools to apply latex paint to ensure the flatness and look of the coating. Use brushes and rollers to apply an even latex paint, and don't worry about leaving thick parts of the paint behind, as this may cause uneven walls.

4.Control the thickness: The thickness of the paint is also a factor in the unevenness of the wall. Therefore, it is necessary to control the thickness of each brush and try to avoid the ecliptic caused by multiple rollers.

5.Dry for a long time: After each layer of paint has been applied, it needs to be allowed to dry completely. If the paint is not completely dry, the flatness between the paints will be affected, which will eventually lead to uneven walls.

In short, the problem of latex paint wall is not straight can be solved by the above scheme. It should also be noted that the selection of materials for coatings and the skills and experience of construction personnel are important factors to ensure the quality and flatness of the wall. When choosing latex paints and applicators, quality and professionalism need to be guaranteed.

Decorating a house is a tedious and laborious process, in which the flatness of the walls is very crucial. If you have uneven walls, then there are a few things you need to do to fix it. Here are some things you can do to help you solve uneven walls:

1.Find out the cause of the problem.

First, you need to find out what is causing the unevenness of the wall. The unevenness of the wall may be caused by the lack of leakage and attention to the levelness during the construction of excavation and demolition, or the cracks and sand problems in the wall. Once you find out the cause, you can take appropriate action to fix the problem.

2.Use caulk.

Caulk can be used to fill cavities and bumps in the wall, smoothing the wall. When you notice a bulging area on the wall, you can use a shovel to remove it and push the caulk into the hole. The caulk needs to dry for about 24 hours before it can be sanded and painted with a sander.

3.Use adhesives.

Adhesives can be used to fill gaps between walls and floors. If you find that the floor is uneven when laying tiles or wooden floors, you can apply adhesive to the floor to stick the tiles or wooden floors to the wall. Adhesives can help fill in the gaps and level the entire floor.

4.Repaint the walls.

If you have a bump or dent in the surface of your wall, repainting it is the easiest way to fix it. You can sandpaper the surface of the wall, then apply a mixture of plaster and water with a flat brush, and finally paint it with a roller.

In general, the problem of uneven walls can be solved. As long as you identify the root cause of the problem and take appropriate measures to repair it, you can make the wall surface smooth, beautiful and comfortable.

It's just that the wall is a little uneven, and you can use sandpaper to polish it before brushing. You can spray paint again on the basis of the original paint layer, and then sand the wall with sandpaper, level it with the original wall, and then paint after confirming that there is no problem. If the decoration company is responsible for the decoration, it shall refuse to accept it, carry out maintenance, and ensure the quality of maintenance.

Secondly, we should supervise the renovation company when it is carrying out wall repairs. If it is found that the flatness deviation is less than 1 cm, the wall foundation is better, and the putty can be brushed 1-2 cm and then leveled. But if the front wall foundation is not treated well, it is necessary to remove all the original wall skin, and then smooth it with cement mortar and gypsum, and then polish it smooth with sandpaper.

If there is only a local unevenness on the wall, you can brush it again on the basis of the original putty layer, and then polish it on the wall with sandpaper, and then compare it with the flatness of the original wall. Once you are sure that there are no problems, you can continue with the painting application. If the wall surface is uneven in a large area, and the flatness error is not more than one centimeter, there is no problem with the base layer of the wall, and the putty with a thickness of 1cm to 2cm can be brushed in the uneven position, which needs to be leveled.

If the flatness error of the wall is greater than one centimeter and the area is large, the wall base must be removed first, then leveled with gypsum and cement mortar, and then putty sanded.

If the uneven area is only a small part of the whole wall, this situation is very easy to decorate. Use sandpaper to polish the smooth and protruding places, or use a small shovel to flatten the raised parts little by little; The recessed part can be filled with putty powder to make it as smooth as the surrounding wall. Finally, after finishing work such as painting and painting, the wall will be smooth and beautiful.

If the whole wall is uneven everywhere, and the problematic area reaches more than 50%, how to decorate the uneven wall? This kind of problem is more troublesome to deal with. If you still decorate according to the previous method, the workload is also relatively large.

At this time, you can first check whether the quality of the front base is up to standard. If necessary, shovel off the entire wall skin and then smooth it with cement and plaster. If the flatness is too low, drywall can be used.

After installing the plasterboard, apply a layer of putty powder and finally paint.