-
Turn on the gas water heater every day.
Will it be a waste of gas? Why?
Nowadays, many families like to install gas water heaters. Most gas water heaters are installed in kitchens. When we use it, the gas water heater will shoot and then provide us with hot hot water.
Gas water heaters do not work when not normally in use. But many friends have considered such a question, that is, our gas water heater is usually turned on, so what problems will be there for a long time? Have you had a gas water heater for a long time?
In fact, this problem is the problem of using gas heaters in our homes. Specifically, the gas heaters in the home are all open and never go through. So in this state, won't the gas water heater charge natural gas?
The personal points given here are to look at the arrangement of our natural gas heaters underlined.
Different pipe layouts, it produces different results.
The gas water heater mentioned here does not circulate hot water, meaning that the water pipe of the gas water heater installed in our home is just a hot water pipe and does not circulate hot water. When we use it, the gas water heater will heat the water. In this case, we generally need a while, and then you can have hot water.
This is a gas water heater that does not have a circulation. When the gas heater is on standby, it does not cause fire and combustion of natural gas. For the gas heater in the home, it should be clear to everyone that the gas water heater will fire only when we use hot water.
Then the burning of natural gas began to carry out the work. During the usual time, the gas water heater is not in any working condition. Of course, gas water heaters do not consume natural gas in this standby state.
The gas water heater consumes only slightly in standby mode, while the room does not work in the room. In fact, our gas water heaters are open all year round,** is a certain power consumption, but very little. But the gas is not consumed.
It consumes only natural gas because there is only a burning state.
Gas water heater consumption gas consumption depends on how much hot water we use. This is mainly because when we use hot water, we can only consume natural gas to produce hot water. If we don't use hot water, then gas won't be consumed.
Therefore, from the point of view of basic energy exchange, there is no gas billing for our gas water heaters.
-
No, the basic working principle of the gas water heater is that the cold water enters the water heater, flows through the water-gas linkage valve body under the action of a certain pressure difference of the flowing water, pushes the water-gas linkage valve, and at the same time pushes the DC power supply micro switch to turn on the power supply and start the pulse igniter, and at the same time open the gas transmission solenoid valve.
-
Personally, I don't think it's a waste of gas at all, after all, I think it's also a necessity for life, because it usually doesn't consume too much.
-
No, because gas water heaters only consume gas when there is a fire, so they are not usually consumed.
-
No particular waste of gas. Because gas is only used when the water heater is used.
-
Generally, normal use will not be particularly exhausting, mainly depending on the heat energy it needs, if the demand is relatively large, it will be more laborious. Especially when the original temperature of the water flow is too different from the required temperature, it will be particularly demanding.
Gas water heaters.
There is only a slight power consumption when the standby is on, and there is no work in the room when burning. In fact, it is said that our gas water heater is open all year round, and the cost is a certain amount of electricity consumption, but it is very small. But gas is not consumed at all.
This is because natural gas is consumed only when it is burned.
Precautions for gas water heaters.
Water heaters must be installed in a well-ventilated kitchen or a separate room, it is strictly forbidden to install them in a bedroom, bathroom or toilet, keep the air flowing in the bathroom or kitchen, and be sure to open the doors and windows of the kitchen leading to the outside to avoid carbon monoxide poisoning.
Accident. There are two types of gas water heater exhaust gas discharge devices:
1. It is flue exhaust type, that is, an exhaust pipe is connected to the exhaust port of the water heater, and the exhaust gas is discharged to the outdoors through the pipeline. The proper installation of this type of flue requires an outdoor chimney to allow it to be naturally ventilated.
2. Strong exhaust type, that is, through a small fan installed on the water heater body, the fan is started through the water heater linkage device, and the exhaust gas is discharged to the outside. This type of water heater is not dangerous regardless of whether the indoor ventilation is good or whether it is windy outside.
-
withGas water heaters. The original of the people who are less
First of all, it should not be installed in the bathroom or far away from the kitchen, if it is far away from the kitchen, the hot water pipe is too long, and a lot of water will be consumed in the middle. In addition, gas water heaters occasionally have the problem of not catching fire.
Classification of gas water heaters.
1.According to the type of gas, it can be divided into artificial gas water heaters, natural gas water heaters, and liquefied petroleum gas.
There are four types of water heaters and biogas water heaters. Water heaters of different gas types cannot be used universally.
2.According to the control mode of water heater effluent, it can be divided into pre-standard and post-standard water heaters. The pre-standard water heater uses the inlet valve of the water heater to control the hot water flow of the family manuscript water heater, and its structure is relatively simple, but it is inconvenient to use; The post-system water heater uses the outlet valve of the water heater to control the hot water flow of the water heater, and its structure is more complex, but it is more convenient to use.
3.According to the water supply pressure, it can be divided into low-pressure, medium-pressure and high-pressure water heaters.
4.According to the exhaust mode of the water heater, it can be divided into three types: in-line water heater, flue water heater and Zhaoxiao balance water heater. The forced exhaust is equipped with a small exhaust fan, which is safer than the non-forced exhaust.
-
When a gas water heater is working at a high level, the "maximum gas consumption" is rarely used.
The gas water heater is turned on continuously for 10 minutes, and the medium temperature consumes about cubic meters of gas, which is slightly high. The standard value is to consume gas in your home gas water heater for 1 hour. The higher the number of liters, the more gas is consumed.
Gas Consumption Standard for Gas Water Heaters:
The flow rate of the gas meter that can meet the technical specifications specified in the standard is called the capacity of the gas meter. Manufacturers produce gas meters with different capacity specifications according to the standards according to various requirements of users. Generally speaking, it is not possible to produce a gas meter of one size that can be adapted to various usage requirements.
The selection of general capacity should be determined according to the amount of air consumed. The selection of normal gas meter capacity should be within the range of 20% to 60% of the rated flow rate of the gas meter. When calculating capacity, it is necessary to take into account not only the immediate situation, but also the future development of gas use.
Types of Gas:
There are three main types of gas currently used in China: artificial gas, natural gas and liquefied petroleum gas. Due to the different origins and manufacturing of gas in various places, its components are also different, so its calorific value is also different. In our country, the calorific value of these three types of gas is about:
Natural gas: 8000 to 8500 kcal m3.
Artificial gas: 3500 to 4500 kcal m3.
LPG: 22,000 to 25,000 kcal m3 for wide mold.
Different gas consumption of gas appliances:
1. The air consumption of the water heater.
artificial gas: to 3 m3 h;
Natural Gas: To;
LPG: To.
-
The gas consumption of a gas water heater depends on the power of the water heater and the time of use. Generally speaking, the gas consumption of gas water heaters is low, and if you don't use it for a long time, the gas consumption will increase accordingly.
-
The air consumption of gas water heater is related to the model, frequency of use, hot water temperature and other factors. Generally speaking, gas water heaters consume more gas, but compared with electric water heaters, gas water heaters heat up faster, have higher hot water temperatures, and are more convenient to use.
When using a gas water heater, you should pay attention to the following:
Choose the right water heater model, according to the number of family members and the amount of hot water used, choose the right water heater model to avoid wasting gas.
Regularly maintain and clean the water heater to keep the water heater running properly and reduce gas waste.
Use hot water wisely and avoid wasting hot water and gas.
In short, the gas consumption of gas water heaters is relatively large, but compared with electric water heaters, gas water heaters heat faster, the hot water temperature is higher, and it is more convenient to use. When using a gas water heater, you should pay attention to saving gas and avoiding waste.
-
Summary. Hello dear, no. Definitely.
1. The ignition coil and strong exhaust motor inside the gas water heater are in a state of standby for a long time without turning off the power switch, that is, its rectifier power supply is always working, and its electronic components will heat up and even burn accidents after a long time. In addition, due to the work of the rectifier power supply, it will consume a certain amount of electric energy, although its energy consumption is not large, but it is also an unnecessary waste for many years.
2. Since most of the gas valves in the gas water heater are hydraulic (mechanical) or solenoid valves, they will inevitably have the phenomenon of internal rubber gasket (sheet) aging and mechanical failure after being used for a long time. Therefore, there is also a possibility of a gas leak.
3. If the quality of the connecting hose between the tap water triangle valve and the water heater installed on the wall is problematic, and it has aged for a long time, if the valve is not closed, once it bursts, it may cause flooding and troublesome accidents for the downstairs neighbors.
Can a gas water heater be left on all the time? Will there be a safety hazard?
Hello dear, no. Definitely. 1. The ignition coil and strong exhaust motor inside the gas water heater are in a state of standby for a long time without turning off the power switch, that is, its rectifier power supply is always working, and its electronic components will heat up and even burn accidents after a long time.
In addition, due to the work of the rectifier power supply, it will consume a certain amount of electric energy, although its energy consumption is not large, but it is also an unnecessary waste for many years. 2. Since most of the gas valves in the gas water heater are hydraulic (mechanical) or solenoid valves, they will inevitably have the phenomenon of internal rubber gasket (sheet) aging and mechanical failure after being used for a long time. Therefore, there is also a possibility of a gas leak.
3. If the quality of the connecting hose between the tap water triangle valve and the water heater installed on the wall is problematic, and it has aged for a long time, if the valve is not closed, once it bursts, it may cause flooding and troublesome accidents for the downstairs neighbors.
Then I open a night every night before taking a shower, and every day I have to restart at night, and the next morning I don't need to turn it off for another day.
Wouldn't it be dangerous to restart so often?
The gas switch connected to the gas pipe, can I keep it on? It's always too much trouble to close.
Wouldn't it be dangerous to restart so often? It must be turned back on, which is relatively safe.
No, you cannot. It must be turned off every time.
-
Summary. Hello dear. There are fewer people using gas water heaters because: **high, constant temperature difference, and more complicated operation.
Hello dear. There are fewer people using gas water heaters because: **high, constant temperature difference, and more complicated operation.
Can you tell us more about that?
**The gas water heaters on the market are generally ruined all over the market** are about one or two thousand yuan, and if it is a more high-end style of brand goods, four or five thousand are wanted. The average price of electric water heaters is only about 1,000 yuan. Therefore, the cost performance is not so high.
Families who have used gas water heaters should have found a problem when taking a bath, the water temperature is always hot and cold, even if sometimes the screen is written how many degrees, in fact, the water temperature is not like this. This is because the water is discharged instantly, so its temperature is affected by the water pressure flow, the inlet water temperature and the heating efficiency, so sometimes it will be hot and cold. The operation is more complicated, because gas water heaters are not like electric water heaters, just plug in the electricity and turn on the switch to heat.
There will be many buttons on the screen to adjust the water temperature, water flow rate, heating mode, etc. But not everyone has only two husbands and wives at home, and many families with children and the elderly may not necessarily use it.
-
With the progress of living standards, water heaters have become a bulk household appliance in every household. If you use a water heater, it will be much easier to use hot water at home, whether it's to wash your hair, dishes, or hand your hands, you can use it at any time. So many people use hot water at home for convenience.
Especially in winter, the water heater is left on all the time. In this regard, the master said that the two most common water heaters on the market are electric water heaters and gas water heaters, if it is a gas water heater, it is fine, but if it is an electric water heater, it cannot be turned on 24 hours a day. Because doing so can easily lead to the aging of household appliances, and even power supply accidents may occur.
The sky is also getting colder and colder in many places, and we have to use a water heater every day when we take a shower, and we have to turn on the water heater every day so that we can have hot water, right? Do you really have to turn on your water heater all day in winter? A lot of people have been doing the wrong thing all along.
Does a gas water heater need a natural machine when it is turned on for a long time? In fact, this question is about the application of my home's gas water heater. In detail, the gas water heaters at home have been on for a long time and have never been involved.
Is it spicy? In this case, doesn't a gas water heater consume natural gas? Here, the personal concept provided by the family chores is to look at the way our gas water heater is plugged in.
The difference in the way the pipes are laid, the results are also different.
Before things could be resolved smoothly, another overkill happened. The landlord on the second floor sneaked around while the master bedroom landlord was taking a shower, turned off the water heater, and bathed with the other party's hot water, turning it into a cold shower. Hearing this, Lao Feng had to complain for the residents of the house.
But before that, the old phone should say that whether the gas water heater needs to be turned on 24 hours and whether it takes 24 hours to turn on the gas water heater depends on the type of water heater. At present, gas water heaters have products with zero cold water, and there are also products that are burned first. A gas water heater with 0 cold water has hot water when it is turned on, and it does not need to be turned on 24 hours.
Ordinary gas water heaters are not good. Because of the process of boiling water, the water heater will not start working until the water becomes larger. This gas water heater requires 24-hour driving to produce hot water uninterrupted.
Gas water heaters have strong requirements for installation location, and most household gas water heaters are installed in the kitchen. Require 24-hour window ventilation and stay away from gas stoves and other appliances. It is also necessary to install a gas meter.
Good ventilation conditions, away from gas stoves.
First of all, Wanhe gas water heater is better. Wanhe Group was established in August 1993 and is located in Shunde, the hinterland of the Pearl River Delta. Now it has one of the largest sterilizer production bases in Asia and a large-scale, first-class water heater production base in China, with an annual production capacity of more than 2 million water heaters and sterilizers, and the products sell well all over the country and Europe, America, Southeast Asia and other regions. >>>More
1. The water heater is hot and cold, generally a water pressure problem, find the property management office to adjust the water pressure, resulting in the water heater water temperature is not hot enough or hot for a while and cold for a while, if the water volume of the shower is not significantly reduced, it may not be a problem of water pressure; 2. If the water outlet is far away from the water heater, such as installed on the balcony, make sure that the cold water of the water heater is turned on to the maximum? This is very critical, because the tap water is not turned on to the maximum, and the water temperature at the outlet is adjusted, and the water heater will be turned off due to insufficient flow and high temperature. 3. If the water is supplied by the water tank on the roof, the pressure is only related to the height difference between your home and the water tank, and the water pressure is not enough, you can consider installing a water pump; 4. If the water heater of the user using bottled liquefied petroleum gas is hot and cold, you can check whether the pressure reducing valve is normal; 5. Adjust the water heater water volume adjustment button to the minimum; 6. If there is no hot and cold before, you can check whether the water inlet of the water heater is blocked; 7. If you have tried the above methods and don't know what to do, you can directly find the water heater for after-sales maintenance; 8. If the water heater has been used for a long time and needs to buy a new machine, it is recommended to choose a constant temperature water heater, which can be accurately judged according to the real-time water consumption of the gas heater and the change of the inlet and outlet water temperature, and command the combustion system to burn in stages in a fully optimized state, and at the same time command the unique stepless fan to reasonably allocate the combustion air required to achieve super energy saving and make the water temperature always constant. In this way, there will be no more hot and cold baths.
If the leaking cushion is broken, find a professional to repair and replace the parts.
There should be no water vapor outside, because under normal circumstances, the inside of the gas water heater is very tightly sealed, and the hot water and water device generally will not leak out. >>>More
There's basically no comparison between the two, so you don't have to. In fact, the most fundamental principle is to make a comprehensive judgment according to one's own conditions. >>>More