What to do if the door squeaks, what happens when the door creaks all the time

First of all, we need to prepare the tools that may be used, a word to change the cone, a T-20 spline, and need to prepare the vehicle maintenance to use the car rust inhibitor, butter, and then, let's start the wonderful solution process. Abnormal noise caused by the wiring harness inside the door striking the door panel. When the vehicle is driving on a bumpy road, it may cause the wiring harness inside the door to hit the door panel, so that there will be waves of noise, what we have to do is to disassemble the door trim panel, and then fix the wiring harness inside, it is best to find a small sponge, and then stick the ** bundle on the door panel, so that the wiring harness will hit the sponge, and there will be no noise.

Abnormal noise caused by the pull cord inside the door striking the door panel. When the inner cable of the door hits the door panel, the sound is still obvious, what we have to do is to disassemble the door trim panel first, and then wrap the inner cable of the door with a small sponge, so that there is no noise, which is also one of the reasons for the abnormal noise of the car. Abnormal noises caused by door seals.

When the door seal is used for a long time, the seal itself will gradually age, so that the door seal and the car body have a certain friction, so that the vehicle in the driving, it may produce abnormal noise, we check the sealing strip of their vehicle, after the problem, change it to a new one, so that the door abnormal noise will solve the abnormal noise generated by the door itself. The reason for this problem is that the door lock post is installed outside, resulting in the door itself and the car body is not very tight, at this time, we need to adjust the door lock post a little, little by little, until the door and the car body are tightly integrated. Abnormal noise caused by the door hinge.

After the hinge is used for a long time, it will greatly increase its friction, and then produce abnormal noise, so what we need to do is to take out the car rust inhibitor, spray some car rust inhibitor in the hinge, and then apply a little butter, so that the friction will be greatly reduced, and the abnormal sound of the car door will be gone. Abnormal noise from the door limiter. If the door limiter is not maintained regularly, it will also make the door produce abnormal noise, what we need to do is to apply some butter and spray some car rust inhibitor, so that the friction of the door limiter will be greatly reduced, and the abnormal noise of the door will be solved.

Abnormal noise caused by the friction of the door glass seal. After this reason, what we have to do is to fix the door seal strip by hand to make it return to its own position, so that the abnormal sound of the door is not there, we can solve it according to the specific analysis of your own vehicle!

It should be the sound of opening and closing the door. This is the door side hinge long-term turn. The noise caused by dry grinding, as long as you add some oil above the lotus leaf, lubricate it, you can't find the oil, you can use cooking oil, and it will work if you add a point.

If the door shaft rings when the door is opened and closed, then a few drops of oil in the door shaft will do.

If this happens, it means that the door has been used for too long, and you can put some or something in the door for him, and it will be fine.

It may be due to the broken bearing, the small gap between the door leaf and the door frame, the use of the security door for too long, and so on.

1. Cause of failure: The anti-theft door is generally caused by the dark hinge (hinge), the bearing on the hinge is broken, and the hinge hinge on the door frame is worn out.

Solution: Add some lubricating oil to try, if it still doesn't work, find a manufacturer to replace the bearing on the hinge.

2. Cause of failure: The gap between the door leaf and the door frame is small, so there will be a sound when the door is closed.

Solution: Adjust the gap, or use a small wooden square clip between the door leaf and the door frame to close the door lightly, be careful not to use too much force, little by little, try repeatedly.

3. Cause of failure: The anti-theft door has been used for too long.

Solution: You can consider changing the security door.

Precautions for security doors:

1. Do not open the door leaf to the maximum for a long time, and do not use bricks, sticks and other hard objects to pad the lower corner of the door hinge and the lower threshold, which is easy to damage the door closer, especially when there is strong wind, it is easy to cause damage to the door leaf.

2. The door closer should not be opened for a long time, and if the opening time is too long, it is easy to cause oil leakage of the door closer, making it unable to work normally.

3. Carry your own keys with you, do not lend them to other people, and do not let people you don't know, people who post small advertisements and small traders and vendors enter together.

It may be that the dampness has caused a lack of oil in the metal part, so you can apply some oil by yourself. It won't ring anymore.

Is the door made of wood? Wooden stuff gets hot and cold, and it gets like that in the summer, and that's okay. It is also possible that the bearing of the door is out of oil and rusty, and it is OK to add some oil.

The hinge lacks lubrication.

Door and window hinge hinge grease should be used. Tiger head hotolube or Kruber can be, colorless and odorless, good adhesion, good durability, suitable for household use. There are 130 grams of small tubes in the sleeve, and you can apply it.

But don't use lube and regular butter, the lube will be lost quickly. Ordinary butter will have a harmful smell that is not good for the human body.

When in use, raise the door and apply it to the hinge, or apply it directly to the hinge gap, and it will slowly penetrate into the hinge.

At the junction, the lubrication is not enough, or there is a phenomenon of deformation and unevenness, resulting in friction between the metals. and the resulting sound.

Preparation tool: one tube of engine oil.

Solution:1. Cut a small opening in the slender pipe in front of the engine oil to facilitate the oil to flow out.

2. After closing the door, find the place where the door is connected to the door frame (hinge), where there will be a creaking sound when rust.

3. Squeeze out the oil along the top position and let it lubricate the hinge.

4. The lower position is also slightly smeared to prevent missing places (usually a door has two hinges).

5. Open the door to reveal another page of the hinge.

6. After applying the upper and lower pieces in the same way, there will be no more sound on the door.

The anti-theft door will make a creaking sound when opening the door, generally because the bearing on the chain of the anti-theft door is damaged, resulting in the dumpling chain and the dumpling chain box shaft of the anti-theft door rubbing against each other and making a creaking sound, in this case, the appropriate amount of lubricating oil can be applied on the chain. If the problem cannot be solved after the dumpling chain is lubricated, it is recommended to find a professional to replace the new bearing.

Notes:In the process of using the anti-theft door, it is necessary to do a good job in the maintenance of the door leaf, once the surface of the door leaf is found to be stained, the door leaf needs to be wiped clean immediately with a rag, and the door leaf needs to be kept dry in daily life. If the home is installed with a sprayed steel anti-theft door, it is best not to tear off the protective film of the door leaf after installation.

The door creak solution is as follows:1. If you don't want to repair, the best way is to open the door lightly when you open the door and close the door lightly, and try to slow it so that there will not be too much noise.

2. The sound is caused by friction, and reducing friction is the best way.

3. Lubricate the hinge on the door, and after a day or so, there will be no squeaky sound when we open or close the door.

4. Cut off some candles and smear them into the hinge, and it will work immediately, and there will be no squeak.

Door squeak workaround:

1. Scratching sound.

It often occurs on various cabinet doors, when the door leaf rubs against the door frame, making a dull "squeak" sound - this is the sound of wood products scraping against each other.

At this time, it is necessary to find the position of the scratch, adjust the screws on the spring hinge, and keep the door leaf at an appropriate distance from the door frame (if the distance is too close, the proximal end of the hinge is prone to scratching; If the distance is too far, the distal end of the hinge is prone to scratching. We need to open and close the door leaf and adjust it at the same time).

Wood products are more deformed, so if the wood is not particularly good, we may need to adjust it every once in a while.

2. Friction sound.

When the door is opened and closed, there is a "squeak" sound, which is mostly the sound of friction of various parts inside the hinge. Normally, the hinge should rotate smoothly and freely, but if the two surfaces that touch each other at the turning point are not flat enough, it will make noise.

Increasing the lubrication of the hinge can quickly eliminate the friction sound. We can buy a special mechanical oil changer, or we can use cooking oil instead – just drip the oil into the gap in the hinge.

3. Rusty sound.

The hinge is rusty, which is an extreme phenomenon of friction inside the hinge – the friction surface becomes very unsmooth due to the presence of rust. Not only does it make an abnormal noise, but it may also cause the switch to be unsmooth.

If the rust is not serious, it can be solved by dripping lubricating oil several times. Turn the door leaf while dripping oil until the rust is rubbed clean. If the rust is severe, it will be necessary to replace the hinge with a new one.

The hinge is rusty, and in the final analysis, the quality is not good. Choose stainless steel hinges, pure copper hinges, and chrome plating on the surface if necessary, which can fully avoid rust on the hinges.

4. Mechanical sound.

Mechanism damage cannot be repaired and can only be solved by replacing the hinge.

The heavier the door, the higher the requirements for the hinge's load-bearing capacity. When buying a hinge, you can use the weight of the hinge to make a preliminary assessment of the material used in the hinge - the heavier the hinge, the more affordable the material used for the internal structure.

In addition, the load-bearing capacity of different types of hinges is also different, and many wooden door manufacturers are equipped with mother and son hinges when they leave the factory. This kind of hinge can only rely on two screws on each side to bear the load, which is far less good than the casement hinge.

5. Deformation sound.

The wooden door has been deformed, and you can feel a noticeable astringency when opening and closing, and there is no good way to do it except replace the door leaf. Wooden doors are susceptible to moisture, and deformation is inevitable. In some damp rooms, such as bathrooms, choosing a solid wood door when using a wooden door, or adding glass to the wooden door, can help prevent the wooden door from deforming.

6. Loose sound.

The main reason for the loosening of wooden doors is that the size of the door leaf is too small, which allows the door to move within the door frame. There is a ring of sealing strip between the door and the door frame, and we can replace the thicker sealing strip to help fix the wooden door. Increasing the sealing effect of the door is not only conducive to eliminating abnormal noise, but also increasing the sound insulation, heat preservation, windproof and light blocking ability of the door.

How to solve the door squeak? What are the normal use methods and maintenance skills of wooden doors? As a newbie, you may not know much about this. But don't worry, I'll reveal the answers to these questions one by one.

1. If you don't want to repair, the simple and practical way is to open and close the door lightly, and as slowly as possible, so that there will not be too much noise as slow as possible.

2. The reason why the door god squeaks is due to friction. However, the best way to reduce friction is to drip some lubricating oil on the hinge, and for about 1 day or so, the squeak will be reduced when the door is opened or closed.

4. Of course, you can also cut the candle into the hinge, the effect is very obvious, and the squeak disappears immediately.

5. In addition, you can also put an appropriate amount of pencil powder on the hinge and inside the hinge, the effect is also very obvious, and the squeak will disappear immediately.

6. In addition, if the hinge is seriously corroded, it is recommended that you replace it with a new hinge. Of course, not only should the hinge be replaced, but also the position of the hinge should be changed to avoid potential safety hazards caused by the hinge falling off.

Normal use and maintenance skills of wooden doors.

1. After the wooden door is installed, the wooden door that has not yet been painted should be painted within 5 days.

2. In the face of dry and windy weather, the doors and windows of the construction site must be closed, which helps to avoid the influence of air on the door, and at the same time should maintain the consistency of indoor and outdoor temperature and humidity to prevent the deformation of the door leaf, especially for the environment that is not used for a long time.

3. Generally speaking, the door leaf must be kept closed at all times, and the latch must be inserted to prevent collision and damage. Of course, in the face of heating and heating shutdowns, the door should be kept open to prevent deformation due to uneven temperature of the door leaf caused by heating.

Summary: After reading the above introduction, I believe you have a further understanding of how to solve the squeaky door. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.