What should I do if the floor is high and the tap water does not come?

The floor is high and the tap water does not come, there are several solutions:

1.Install a booster pump: For commercial housing, a booster pump or other pressurization device can be installed on the main pipeline of the house, because in this way the water problem can be effectively solved, the water pressure is increased, and the tap water can be better raised from the downstairs to the upper floor.

2.Install several stainless steel water tanks on the roof: For self-built houses, if the floor is high, you can install several stainless steel water storage tanks on the roof, which will automatically store water to maximize the normal water use, that is, increase the water pressure, and the tap water on the high floor will also come up.

3.Combination of booster pump and water tank: If the water in the storage tank is still not enough, you can install a booster pump at home, and combine it at the same time to increase the water pressure most effectively and ensure that the water reaches the upper floors smoothly from the downstairs.

5.Check the pipes and diameters of the water supply: If the pipes of the water supply are too thin and the water supply cannot meet the water consumption, you need to replace the water supply lines with larger diameters.

6.Find the property to communicate about the water supply problem: In the community, we have to pay the property management fee, and if there is any difficulty, we can communicate with the property.

The above are several ways to solve the problem of high floor tap water, which can be selected according to the actual situation.

The first thing that comes to mind when the floors are high and the tap water pressure is not enough should be the property.

If there is no property, a booster pump will need to be installed.

to increase the pressure of tap water. Self-built houses can install a water tank on the roof of the building, and use the tap water after pressurizing the water into the water tank, in fact, a booster pump is also needed, but it is not used so often. Personally, I don't want a water tank, so as not to be polluted twice.

Make a water tank on the roof of the building, pump it to the water tank, and then distribute it from the water tank to each household.

Generally, the water supply of the community needs to use a pressurized pump, so the high water must not go up, depending on the use of **. If it is a residential building, the general property of the community will have relevant measures

The floor is high and the tap water does not come, and the solution to the water pressure is the key, and the solution is as follows:

1. Install a booster pump.

For commercial housing, a booster pump or other pressurization device can be installed on the main pipeline of the house, because in this way the water problem can be effectively solved, the water pressure is increased, and the tap water can be better raised from the downstairs to the upper floor.

2. Install several stainless steel water tanks on the roof.

For self-built houses, if the floor is high, several stainless steel water storage tanks can be installed on the roof, which will automatically store water to maximize the normal water use, that is, increase the water pressure, and the tap water on the high floor will also come up.

3. The booster pump is combined with the water tank.

If the water in the storage tank is still not enough, you can install a booster pump at home, and at the same time, the most effective way to increase the water pressure and ensure that the water reaches the upper floors smoothly from the downstairs.

4. Leading the way, speeding up the construction of urban infrastructure, and improving the water supply capacity is the most fundamental way, that is, increasing the water pressure from the starting point of water supply, so that the tap water on the high floors can go up smoothly.

Extended information: tap water is not high, other auxiliary methods:

1. Check the water supply line. Sometimes the water pressure may burst the water pipe, we can go to the relevant person in charge to check the water supply route and repair it in time.

2. Check the pipe and diameter of the water supply. If the water supply pipeline is too thin, the water supply volume cannot meet the water consumption, and the water supply pipeline with a large diameter needs to be replaced.

3. Find the property to communicate about water supply. In the community, we have to pay property management fees, and if there are any difficulties, we can communicate with the property.

Hello, this requires the addition of pressurization equipment. If you want the tap water to reach the upper floors, then you need more pressure, so you can add more equipment.

If the tap water does not come from the high floor, it is because the pressurization is not done well, so you need to ask the water supply company to deal with the problem.

If you live on a higher floor, you can choose to install a supercharger to let the tap water go up.

At this time, it is necessary to install a water pump to send water up by pressure, or you can also install the water tower to the top floor, so that you can travel the pressure difference.

Houses with high floors are generally equipped with a water tank on the roof, which is pumped into the tank and then supplied with water.

If you live on a higher floor and don't want to be on your own, install a supercharger on the water.

Answer: The pressure on water supply in some cities is insufficient, and in some areas, the pressure is also due to the high terrain. It is common practice to install a booster pump in your own home, but the booster pump installed in your home may not work properly when the residents downstairs are using water.

This problem can be avoided if used in conjunction with a pressurized water storage device. The working principle is: the pipeline booster pump is set to work at night, which is the possibility of using water downstairs is very small, after the booster pump works, the water is stored in the pressure storage container, and the booster pump stops working after the water is stored to a certain capacity.

Residents can use the water in the pressurized water storage container, the pressurized water storage container can have a pressurized water supply, even if there is no water in the pipes, and the home can also have a pressure shower and use a washing machine. After the pressure of the pressure storage vessel is reduced to a certain extent, the booster pump will work to store water. In this way, the problem of no water in the household can be solved.

There are many similar products for pressurized water storage on the pressurized water storage container.

Turn on the faucet for ten minutes, and the water will come up naturally.

Summary. Hello!1. Hair causes sewer blockage:

After the sewer is used for a period of time, the hair that usually takes a bath will hang on the pipe wall and accumulate too much, which will cause blockage, and the hair will generally cause the toilet floor drain to be blocked, the washbasin to be blocked, the bathtub to be blocked, and the shower room to be blocked. Therefore, when you usually use it, you must cover the floor drain cover and other protective facilities, and if you have hair, you can pick it up and throw it into the trash.

2. Grease blockage: grease blockage sewer generally appears in the kitchen, this blockage is generally the scaling of the inner wall of the pipeline, and the sewer is not smooth after the serious scaling of the pipeline. It can not be solved with a simple dredging method, there will be just dredging and blocking, blocking, blocking, such is a vicious circle, to completely solve the problem can only be to use a high-pressure water truck to clean the inner wall of the pipeline, or replace the new pipeline.

What is the reason for the poor running water on the first floor of a high-rise building?

Hello!1. Hair causes sewer blockage: After a period of use, the hair of the usual bath will hang on the wall of the Zibi pipe, and the accumulation will cause blockage, and the hair will generally cause the toilet floor drain to be blocked, the washbasin to be blocked, the bathtub to be blocked, and the shower room to be blocked.

Therefore, when you usually use it, you must cover the floor drain cover and other protective facilities next to the mausoleum, and if you have hair, you can pick it up and throw it into the trash. 2. Grease blockage: grease blockage sewer generally appears in the kitchen, this blockage is generally the scaling of the inner wall of the pipeline, and the sewer is not smooth after the serious scaling of the pipeline.

It can not be solved with a simple dredging method, there will be just dredging and blockage, the ruler is blocked, blocked, this is a vicious circle, to completely solve the problem can only be to use a high-pressure water truck to clean the inner wall of the pipeline, or replace the new pipeline.

Hello!1. Hair causes sewer blockage:2. Oil scale blockage.

Hello!You can report to the property company first, or add a booster pump to the water inlet pipe, it is best to buy a fully automatic one, so that it can be solved.

Thank you for your consultation, I hope this service can help you, you can click on my avatar to follow me Qi Ze, follow-up questions are convenient to consult me again, please click on the end of Yun Zichang, give a like, and finally wish you a happy life.

Generally speaking, it is secondary pressure (using water pumps, etc.) to supply water, or direct pressure or recirculation through domestic water tanks. Therefore, the biggest disadvantage of the general water supply in the high-rise is that there is secondary pollution of water, which cannot be avoided for the time being.

Generally have built a pool that communicates with the tap water pipe network, is used to store the tap water that the pipe network sends over, and the water level and water replenishment of this pool are generally automatically controlled by the "float water supply valve", and the water can be automatically closed after the pool is fullBetween the pool and the buildings and the floors of each building in the community, it is connected by a "tap water booster system", that is, a booster water pump system;If there is a roof water tank on the top of a high-rise building, it is a pump system in the form of "automatic water replenishment", and if there is no water tank on the roof, it is a "frequency modulation water supply pressurization system", and the water supply mode of this system is "constant pressure water supply method". In the case of the former, the outlet pressure of the residents on the lower floors is higher than that of the residents on the higher floors, while the difference between the outlet pressure of the residents on the upper and lower floors is not significant or obvious on the floors of the latter water supply system.

1. The water supply pressure of high-rise building water supply requirements is large, and the pressure water supply of the urban water supply network can not be relied on, and the water supply of the pressurization system needs to be set up by itself, due to the large height difference between the upper and lower buildings, in order to avoid the excessive water pressure of the lower layer, the outflow speed is high when using water, resulting in noise and splashing, and the upper layer will form insufficient pressure, and even produce negative pressure suction phenomenon, so high-rise buildings often implement partitioned water supply along the vertical direction to reduce the pressure difference between each section.

2. The water supply mode of high-rise buildings can be divided into: gravity water supply and pressure water supply Gravity water supply is divided into: zonal series water supply, zonal parallel multi-pipe water supply, and zonal single-pipe water supply.

3. Pressure water supply is divided into: pneumatic water supply mode, water pump direct water supply mode (also divided into frequency conversion speed pump water supply mode, multi-pump parallel water supply mode, and water pump pressure reduction water supply mode).

In each community there is a pumping station, which is pressurized to deliver tap water.

A pressure tank is needed, and when the pressure reaches the water, it goes up.

Due to the old or no water supply facilities in the community, the water supply pressure of the small high-rise households in the city is reduced to the lowest during the peak of water consumption, and the water outlet does not produce water. At this time, a water pump can be installed at the entrance of the house to ensure that the household uses water during peak water consumption.

The selection of this type of pump needs to consider the inlet pressure, that is, the head pressure at the peak of water use. To put it simply, the downstairs floors begin to run out of water during peak hours, and the lower the floor is at the beginning of the water run, the lower the water inlet pressure is.

Only you have no water on this floor, you can choose a small pipeline booster pump, which has low power, and you can install an automatic pressure switch, which can be turned on when the faucet is turned on when the water pressure is insufficient, and turned off when the water is not used at ordinary times. The following figure shows that all small pipeline booster pumps (circulating pumps, booster pumps). Depending on the installation space, you can choose a booster pump with different installation methods.

Separated by 1 2 floors, that is, there is no water on the 3 and 4 floors, you need to choose a water pump with a large suction stroke, called a self-priming pump, and an automatic self-priming pump with a pressure switch is installed, which can also realize the operation of the faucet and the shutdown of the faucet. It's just that this type of pump has a large installation space, as follows:

Separated by 3 4 floors, that is, there is no water on the 1 2nd floor, you need to choose a water pump with a larger suction stroke, called a self-priming jet pump, and a self-priming jet pump with a pressure switch is installed, which can also realize the operation of the faucet and the shutdown of the faucet. It's just that this type of pump has more installation space than a self-priming pump, as follows:

The above is a selection of pumps from a purely technical point of view. In addition, the neighborhood relationship of the residents of the unit can be considered, and if the relationship is better, one or several households can share a larger water pump (installed under the stairs or between floors), and the installation and use costs can be shared equally.