Succulent leaves have a little bit of water, can they still be used for leaf cuttings?

Leaf cuttings are a more commonly used propagation method for succulents, which is to use the regenerative ability of plant leaves, and gradually develop into plants with independent life after careful maintenance in the later stage. Although the survival rate of leaf cuttings is relatively high, leaf cuttings with a little water cannot be used, because water leaf cuttings will not take root and sprout, and will eventually rot.

The reason why the leaves can not be cut by the water is that the leaves will hardly survive after the leaf cuttings.

Leaf watering is due to excessive or wet potting soil, causing the leaves to become transparent from top to bottom, and finally decay and disappear. The leaves with a little water are also unhealthy, such leaves have almost no rooting ability, or they have rotted before they have time to root, and leaf cuttings are the use of leaf regeneration ability, unhealthy leaves are naturally not suitable for leaf cuttings, even if the use of water leaves for leaf cuttings, the survival rate is almost zero, so a little water leaves can not be leaf cuttings.

2. Breeding bacteria affects other plants.

If the leaves of the water are not treated urgently, the mold will take advantage of the weakness, and the final result is to cause the whole leaf to rot, and the rotten leaves are easy to breed bacteria, and will provoke some flying insects or other pests, endangering other healthy plants, so it is best not to cut the leaves with a little water.

How to prevent foliate watering? The leaves of succulents themselves are succulent, containing a certain amount of water, and the plant has a certain drought tolerance, so the maintenance process can not be watered too often or excessively, otherwise it is easy to appear watering. In addition, the temperature is too low and the leaves of the plant are frozen is also a major reason for the water, so the appropriate temperature should be given during the maintenance period, especially in the cold winter, shading measures should be taken appropriately, and the plant should be moved to the indoor warm place in time when the temperature drops significantly, so as to avoid the plant being frozen, so as to avoid the situation of the leaf water.

What are the precautions for leaf cuttings? Leaf cuttings are a more commonly used propagation method, first of all, we must choose to carry out at the right time, such as the cold winter and hot summer are not suitable for leaf cuttings propagation, and the spring and autumn seasons, the temperature is more comfortable, more suitable for leaf cuttings. In addition, leaf cuttings should prepare a suitable substrate, you can use river sand or vermiculite, you can also buy nutrient soil, or mix soil yourself, in short, the leaf cuttings substrate must be loose and breathable, and the drainage performance is good, so as to avoid the situation of leaf black rot and improve the survival rate of leaf cuttings propagation.

After leaf cutting, reasonable maintenance should be carried out, such as giving astigmatism irradiation, avoiding direct sunlight, properly controlling water, keeping the soil moist but not wet, and no need to fertilize after leaf cutting, so as to avoid fertilizer damage.

Summary: Leaves with a little water should not be cutting, because such leaves are unhealthy, not only will not be cut to survive, but also may breed bacteria and cause pests to affect other healthy plants. The use of healthy leaf cuttings requires the configuration of a suitable substrate and reasonable maintenance after cutting, so as to improve the survival rate.

Can't be used, succulent leaf cuttings must be selected healthy, complete leaves, water, black rot or bituminous coal are not good, when picking down, pay attention to even the growth point together, no growth point then the leaf cuttings will not be successful.

I don't think so, because such leaves are almost lifeless, and they can't survive with leaf cuttings.

Of course not, the water means that the leaf is no longer good, and if it is used to cut the leaves, it will not survive, and it will eventually rot in the soil.

Selecting leaves, drying leaves, and cutting leaves. When selecting leaves, first exclude thin and shriveled leaves, choose leaves with full form and long growth time, do not young leaves, and have enough nutrients to grow roots when the full leaves are cutting. The leaves are placed in a low-light and ventilated environment to dry for about 2 to 3 days, so that the wounds of the leaves can heal quickly.

This is because the soil you are using has not been sterilized, so this is always the case.

The succulent leaves of cuttings are water-rotten, because of too much water or the environment is too humid and not ventilated, the solution is not to water too much, the leaf cuttings in a ventilated and cool place can be, wait for it to take root and sprout.

Summary. Most overwatered succulents are very drought tolerant and need to keep their surroundings dry during the maintenance process. If we water the succulent too much, its cell wall will be burst, which will cause the succulent to become waterlogged.

Succulents with too much light like the sun, and when maintaining succulents, they should be placed in plants with sufficient light and are not tolerant to strong light exposure. If we leave a succulent plant under strong sunlight in the summer, its cells will also swell due to heat, and the cell wall will also burst, which will cause the succulent to turn into water.

Most overwatered succulents are very drought tolerant and need to keep their surroundings dry during the maintenance process. If we water the succulent too violently, its cell wall will be burst, which will cause the succulent to become waterlogged. Succulents with too much light like the sun, and when they usually dress up and maintain the succulents, they should be placed in plants with sufficient sunlight and are not tolerant to strong light exposure.

If we put a succulent plant in the summer under strong sunlight, its cells will also swell due to the heat and branches, and the cell wall will also burst, which will cause the succulent to turn into water.

Hello dear. See if it helps you? Kiss.

Please give it a thumbs up! Kiss.

Succulent leaf insertion water should stop pouring water and cut off the water leaves.

Succulent leaves plug into water, if there is no rooting, then it is best to throw it away, if rooted, we can wait until it imitates the round and long new shoots, the leaves of the water can be cut off, if you want to avoid it The phenomenon of water, then the moisture of the soil substrate should not be too much, and it needs to be maintained in a warm place with semi-shade and ventilation.

In order to prevent the water from being too severe and showing the scene of black rot, it is necessary to cut off the leaves of the succulent plants in real time. This will prevent the succulent plant structure from continuing to die. Later, put it outside the boring and airy situation to strictly control the water.

Dig the succulent plant out of the pot, then wash the roots of the plant to see if its roots are degenerate, prune off the fallen roots, and prune the miscellaneous roots.

How to prevent succulent leaves from turning into water

1. The situation is breathable.

Succulent leaves can be prevented in advance when they are ready to collapse in water, as long as we usually maintain them, pay attention to the situation and ventilation. Succulents that are too stuffy will have a deep impact on the plants, especially in the summer, as long as they are a little impermeable, they will appear to be watery after pouring.

2. Get more sun.

The best way to prevent succulent leaves from turning into water is to let the plants get more sunlight. When the sun is abundant and the succulent will photosynthesize, the plant will produce chlorophyll, and the leaf petals will not become bright and gradually water.

3. Anti-freezing in winter.

Sometimes the plants will show the appearance of foliage turning into water due to winter frost, so it is best to keep warm in the winter to avoid the appearance of water in the succulent plants. Succulents will continue to dormant in winter, maintain the temperature above 5, so that the plants will not be frozen, and put them on the balcony as much as possible to get more sunlight to warm the plants.

Succulent leaves are inserted into water, if there is no rooting, then it is best to throw it away, if it is rooted, we can wait until it grows new shoots, cut off the leaves of the water, if you want to avoid it from the phenomenon of water, then the moisture of the soil substrate should not be too much, and it needs to be maintained in a warm place with semi-shade and ventilation.

1. Throw it away

Succulent leaf plugging water, we first need to observe whether the leaves used for leaf cuttings have rooting and sprouting, if there is no rooting and sprouting, then it is best to throw it away, because the leaves of the water can not continue to take root and sprout, and will produce a large number of germs, and the leaves can be cut off again after being thrown away.

2. Prune

Succulent leaves are plugged into water, if it has taken root at this time, then we carefully maintain it for a period of time to see if it can grow new shoots, and wait until the new shoots grow, cut off the leaves of the water in time, and then carefully maintain the new shoots and roots it grows, so that after a period of time, you can get new succulent plants.

3. Moisture requirements

There are many reasons for succulent leaf cuttings, such as when the leaves are cutting, there is more water in the soil substrate, so its leaves are easy to dissolve water, so when the leaves are cuttings, it is best to control the moisture in the soil, it is best to keep the soil slightly moist, and to avoid cutting too deep.

4. Environmental factors

If you want to avoid succulent leaves inserting water, then you also need to let it have a suitable environment, at this time you need to maintain it in a semi-shaded and ventilated environment, you must not let the plant be exposed to strong light, the temperature is best around 20, otherwise the temperature is not comfortable, the succulent leaves will be difficult to root and survive.

1. The reason for the watering of succulent leaves.

1. The temperature is too high: Most succulents are afraid of high temperatures. In the high temperature environment, the heat will expand and contract, and the leaves will gradually become transparent, that is, slowly turn into water. In particular, high temperatures and sultry weather will aggravate the phenomenon of water dissipation.

2. Succulent. Too much watering: Succulents generally have high drought tolerance and do not need to be watered too often when managed.

If the watering is too frequent, the plant cannot absorb it, and the tolerance is easy to accumulate water. The plant is forced to absorb too much water and cannot perform aerobic respiration, and the leaves will dissolve water.

Strong light exposure: If the succulent usually grows well, but the soil is watered by rain, and then exposed to strong light, the leaves will also turn into water in this environment.

Second, the succulent leaves are watered and treated with water:

Regardless of the cause of the succulents, they should be treated as soon as possible. The leaves and branches of the water should be cut off and disinfected to avoid further infection. If the whole plant is turned into Kaiyan water, it means that the plant is not saved, and it is recommended to dispose of it as soon as possible to avoid infecting other plants.

In addition, it is necessary to pay attention to prevention in the later stage. Especially in late spring to early summer, apply more phosphorus and potassium fertilizers to improve its disease resistance. The soil should also be sterilized, and some chlorothalonil and carbendazim can be added to it when watering.

Of course, you can also grow succulents.

Methods of cultivation of succulents.

1. Illumination. Raise succulents at home, be sure to bask in the sun more, the succulents grow short and strong with sufficient light, easy to color out of the state, lack of light and succulents will be thin and long, but the summer exposure should still be covered to prevent sunburn.

2. Temperature. Succulent has certain requirements for temperature, more than 35 in summer to pull the shade net, sprinkle water to the ground to cool down, winter to ensure that the maintenance temperature is above 5, to promote its safe wintering, usually the temperature difference between day and night is a little larger, which is conducive to the color of the succulent.

3. Watering. In the spring and autumn growing season, wait for the soil to dry and water thoroughly, and the succulent dormant in summer, and wait for the soil to dry and slip some water along the edge of the basin, and to water in the morning and evening, the temperature in winter is lower than 10, and wait for the soil to dry and slip a little water along the edge of the pot, and to be watered at noon, the temperature is lower than 5, and the water is cut off directly.

Fourth, ventilation. Spring, summer and winter, the best exposed cultivation conditions, indoor maintenance must pay attention to ventilation, open windows frequently, summer and rainy season, you can use a small fan to blow the wind to the succulent, increase air flow.

5. Fertilization. Succulents do not have much demand for fertilizer and water, so they only need to mix cake fertilizer, bone meal or slow-release fertilizer at the bottom of the pot as base fertilizer when changing pots in spring and autumn every year.

6. Pests and diseases.

Succulents are the favorite pests and diseases, and they can be prevented by lowering room temperature, increasing ventilation and cleaning up dead leaves. In addition, in spring and summer, you can also rotate the spraying of carbendazim and flower protector, or sprinkle a little white medicine along the edge of the pot, that is, dinotefurin, to prevent insect pests.

Key Value: Garden applications.

Succulents have a wide variety of species and peculiar shapes, which can show a strong exotic atmosphere in the landscaping and create a beautiful garden art effect.

Solitary plant species are beautiful and peculiar, generally composed of tall columnar and huge spheres, which are used to form the main scene frame, giving people a sense of majesty and majesty. For example, the imperial brocade of the Euphorbiaceae family, the Jamaican Tianlunzhu of the cactus family, the golden amber of the cactus family, and the African overlord tree of the oleander family can become the finishing touch of the landscape.

After determining the theme plants, other plants follow the principle of "three or five groups with different colors" according to the size, shape and color of the plants; Convergence or dispersion, deviation or separation; high and low, sparse and dense", reasonable matching. There are many species of this kind of plants, the plant shape is peculiar, and the individual is relatively small, so it is suitable to be classified and displayed in a centralized manner when landscaping.