How to write an essay on using a mineral water bottle as a pen holder

This weekend, the teacher assigned an assignment for us to make small crafts out of waste products, and after thinking about it, I decided to make some small crafts out of used mineral water bottles.

I found a mineral water bottle, looked carefully left and right, and felt that the bottom of the mineral water bottle could be used as a pen holder, so I was going to make a pen holder. Because this mineral water bottle, there is a recess in the middle of it, and I cut it open in this part. After cutting, the lower part of the mineral water bottle is actually a pen holder, but it has not been decorated, it is ugly, and the raw edge of the cut is still a little prickly.

So, I started decorating the pen holder again, first cutting the edges of the pen holder into lace so that I wouldn't scratch it, and then I got some stickers and double-sided tape.

Stick them on the outside of the water bottle and in this way, a beautiful pen holder is complete.

There was also the remaining half of the water bottle, and my mother reminded me that I could make a handful, just like the melon seeds in the store, which could be used to make rice. I remembered the melon seeds in the store, which were really made from mineral water bottles, but with large water bottles. So, I cut the remaining half of the water bottle vertically in the middle with scissors, and then slowly trimmed it into an oval shape, so that a small pinch is ready.

I tried to pinch some rice with it, and it was so good.

From this small production, I learned to make pen holders and pinches from waste mineral water bottles, and from now on I will not throw away empty mineral water bottles at will, I want to make good use of them to make more beautiful study and daily necessities.

On the weekend, I was doing my homework at my desk, and just as I was about to pick up the pen, I realized that I had so many pens that I couldn't even put the pen holder, and I thought to myself, I can make my own pen holder!

I first brought an empty mineral water bottle, a box of colored pencils, a 502 glue, a piece of crust paper, a pair of scissors, and a few pieces of colored paper, and the materials were ready.

I first cut off half of the empty mineral water bottle with scissors, leaving the half with the bottom for later use. Then wrap half of the mineral water bottle around a cylindrical shape with stiff paper; Then apply 502 glue to the hard paper and stick half of the mineral water bottle; Then cut the remaining crust paper into a circle and stick it under the mineral water bottle as the base of the pen holder, so that the main stem of the pen holder is ready.

It's time to decorate the pen holder. I first cut out a circle from a piece of colored paper to make the head of the frog, and then cut out an oval shape to make the body part of the frog. Then cut out four small ovals and make the legs and hands of the frog respectively; Then put the frog's head, body, hands, and legs with 502 glue in order to paste the pen holder, only the eyes and belly are missing! Finally, I drew a pair of big bright eyes on the frog's head with a watercolor pen, a white belly on its body, and a few bubbles next to it.

In this way, a beautiful pen holder is made.

I put it on my desk, and the frog on the pen holder was staring at me with wide eyes, as if to say, "Little master, I'm hungry!" "I immediately filled my stomach with a pen. I couldn't be happier to see how cute it looked!

Tool raw materials: mineral water bottles, scissors, a basin of warm water.

Method steps: Cut the prepared mineral water bottle with hail scissors at a centimeter mark. Cut the edges of the cut mineral water bottle with scissors to prevent your fingers from being cut.

Soak the bottle in a basin of warm water to soften the edges of the bottle, and then turn it up one centimeter along the mouth of the bottle to the outside of the bottle so that the mouth of the bottle is not easy to scratch your fingers. Scrape the rim of the bottle with your fingernails so that the flipped one centimeter completely overlaps the bottle. Soak the bottle in warm water again to soften it, and turn it up one centimeter more along the bottom edge.

Finally, press the bottle mouth hard to restore the bottle mouth, repair the bottle mouth, and the mineral water bottle pen holder is completed.

How to make a pen holder from a mineral water bottle is as follows:Mineral water bottles can be used as pen holders to prepare materials: a mineral water bottle, a piece of colored paper, a pair of scissors, and a glue stick.

1. First of all, brush and dry the finished mineral water bottle.

2. Cut off a part with scissors, the length depends on the need.

3. Cut the colored paper into a rectangle, and the rectangular residue should be able to wrap around the bottle, and the width should be longer than the truncated bottle, because the head of the panda should be exposed to the mouth of the bottle.

4. Draw a mischievous panda on colored paper.

5. Cut out the panda's head with scissors.

6. Wrap the colored paper around the bottle, and glue the handover place behind the bottle with a glue stick.

7. The side with a panda face is facing forward.

8. Finally, plug in a few pens, and a cute naughty panda pen holder is ready.

It is easy to practice the pen holder (paper roll back cover to the basic method).

Raw materials for preparation: paper rolls, cloth or paper materials, hemp rope, all-purpose glue.

1) On corrugated cardboard, use a pencil to trace a circle along the paper roll, and then cut it with a blade to prepare it as the bottom of the pen holder.

2) The edge of the paper roll is coated with all-purpose glue, and then the round bottom is aligned and sealed, and the pen holder is successfully shaped.

3) Wrap cloth or paper on the outside, add some decoration at will, and you can succeed in a good-looking and practical pen holder.

Chic boutique box handmade

2. You have to grasp the skills step by step, and you can easily succeed if you get a chic and generous boutique box.

Prepare raw materials: one roll of tape and paper of different sizes, wrapping paper, corrugated paper, photo glue (all-purpose tape or double-sided tape).

Chic boutique box handmade

2. You have to grasp the skills step by step, and you can easily succeed if you get a chic and generous boutique box.

Prepare raw materials: one roll of tape and paper of different sizes, wrapping paper, corrugated paper, photo glue (all-purpose tape or double-sided tape).

1. Use a miniature paper roll with a wider width as a cover, seal a thick cardboard at the bottom (see the pen holder carefully), paste a round decorative paper that is larger than 1 cm from the bottom of the circle, and cut the edge into strips.

3. Cut a long strip of paper, the same length as the circumference, the width is about 3 times the thickness of the paper roll, and fold the upper edge inward into 1 cm to wrap the outer part of the paper roll.

Pull the edge strip to the bottom to float it.

2. Float the edge of the paper strip on the outside of the paper roll.

4. In the same way, cut the edge into long strips and apply the photo glue (all-purpose glue or double-sided tape) to the inner side and part of the edge.

6. Cut out the round decorative paper and paste it at the bottom, and the lid of the box will be completely packaged.

After I read the lesson "Inflatable Raincoat", I wanted to make something too.

I thought about it and didn't know what to do. When I didn't know what to do, Li Yunze came, and my father gave us an idea after seeing him coming, let's make a pen holder together. When we heard the idea, we all said yes, but what about the pen holder?

Dad told me the secret of making a pen holder, and we started to do it immediately, we first made the paper into a round bucket, but it couldn't be rolled round, and when we were about to get discouraged, Dad gave us an idea to put the paper cup in the middle. So we gave it a try, and it worked. After the bucket is done, cut a rectangle from the cardboard, then glue the bucket to the rectangle, and then draw your favorite picture on the colored paper, and stick it to the pen holder.

My classmates and I finally finished the pen holder.

We both looked at the pen holder and smiled happily, this is our first time doing a handicraft, although it is not perfect, but I believe that we can make better things in the future.

The materials needed to make a pen holder from disposable chopsticks include: disposable bamboo chopsticks (to be cleaned), 1 waste mineral water bottle, cotton rope, and wood. Here's how to make it, in four steps:

1. After washing the waste beverage bottle, use a knife to cut off the upper half of the bottle mouth, leaving only the bottom of the bottle.

2. Cut the disposable chopsticks into a length slightly higher than the truncated beverage can, and wrap it with a cotton rope in a figure-8 shape to wrap and fix it.

3. Every time the cotton thread turns around the chopsticks, it will be put into another chopstick again, and so on and so on until the chopsticks can just wrap the drink bottle in a circle.

4. Stick a string of chopsticks wrapped around the beverage bottle with double-sided tape, and tie the first and last chopsticks together with a cotton rope up and down. An eco-friendly pen holder is so easy to make. You can decorate the pen holder with a piece of stake and leaves, or pair it with some colorful waste paper folded flowers, so that a small green and practical pen holder is perfect.

Bottle blowing bubbles, maybe you haven't heard of it. But today, the whole class prepared mineral water bottles, bendable straws, transparent glue, glasses, sinks, needles, hot and cold water, and planned to challenge this hack-and-death experiment - bottle blowing bubbles. If you don't believe me, you look down.

See! Wang Jiehao is eager to try, but I am ingenious, so I will help you see the hole first. I made a hole in the lid of the mineral water bottle that was as big as a straw, and connected a lot of straws to each other, and then I was careful.