What kind of soil is used for longevity flower cuttings? How to maintain it on a daily basis?

Longevity flower cuttings with humus soil. Control the indoor temperature during daily maintenance to ensure sufficient nutrients and light. When watering, adhere to the principle of seeing dry and wet.

Longevity flower cuttings can be done with relatively soft soil, daily fertilization, frequent watering, and placed in a sunny place.

Summary. The best sandy loam soil for longevity flower cuttings, maintenance and management should be dry and wet, and watering should not be too frequent.

The best sandy loam soil for longevity flower cuttings, maintenance and management should be dry and wet, and watering should not be too frequent.

Can you use loess for cuttings?

OK. Longevity flowers can be planted with loess or nutrient soil, and the effect of raising them is also different. Longevity oak flowers do not like too sticky and compact soil, the soil is sticky, the roots can not breathe for a long time, it will rot the hidden foci, and even yellow leaves appear.

It is best to use humus soil and soil in the garden and Shahe soil combined with beams to carry up, and then add some bone meal, or chicken manure, and add bottom fertilizer to the flower soil, which is good for the growth of longevity flowers and flower bud differentiation.

Is it better to have red soil or loess.

If it is a flower with strong adaptability, it can be planted in any soil. If you like alkaline soil socks for flowers, it is better to use loess or black soil than to tell the shed. If you prefer acidic soil, it is better to use black or red soil.

Therefore, the crops planted in the north and south of China are different from the land, on the one hand, it is related to the climate, and on the other hand, it is related to the soil quality.

The soil of the cuttings should be able to provide sufficient nutrients for the plants, and the nutrient soil can generally be mixed with the soil, and a small amount of sand and gravel can also be added; It can also be used after the ratio of perlite and coconut peat can promote the rooting of cuttings. The soil needs to be soaked before cuttings, which is conducive to the full contact between the roots and the soil, so that the roots can absorb water faster.

Longevity flower is a more common flower plant, because of its wide variety, bright flower color, deeply loved by flower friends, what is the best soil for cuttings longevity flowers, in fact, longevity flowers do not have too strict requirements for the soil, as long as the soil is fertile and breathable, it can grow well, you can also use river sand, garden soil mixed as the soil for longevity flower cuttings, can better help cuttings take root.

In order to prevent the cuttings from being transplanted again after they are alive, perlite and coir can also be prepared in a ratio of 6:4 before cuttings, so that after the successful cuttings of longevity flowers, the soil can also provide sufficient nutrients, and there is no need to transplant again.

Before cuttings of longevity flowers, you can first water the soil with water, and after the success of the longevity flower cuttings, you can not water immediately, you should let the roots absorb water through the soil, and put it in a ventilated place for maintenance, which is conducive to better rooting in the later stage.

After the longevity flower cuttings, you need to wait until the pot soil has been dry, and then water a small amount along the perimeter of the flower pot, at this time the cuttings have not yet taken root, do not need too much water, after repeating twice, you can water normally, it is best to keep the surrounding temperature at 15 24 degrees during the maintenance period, and the longevity flowers of the cuttings can take root better.

1. Hydroponic cuttings: Hydroponic cuttings are also a very good cutting method, its advantage is that the rooting is relatively fast, but the root system is relatively relatively Cui, and the seedlings emerge slowly. If you are injured in the process of transplanting after hydroponic rooting, you will have to root twice, but the effect of hydroponic rooting is very ideal.

2. Sand cuttings: The cuttings of longevity flowers also have sand cuttings, which can not only be compared to the rooting speed of hydroponics, but also the emergence of seedlings is fast, and the foundation does not fall seedlings. For sandy soil, it is recommended to use fine river sand.

Choose a slightly mature fleshy stem, cut 5-6cm long, insert it in a sand bed, cover it with film after watering, at room temperature at 15-20, take root in 15-18 days after insertion, and pot it can be planted in 30 days. There are a lot of such cuttings, and the survival rate is 100%.

3. Soil cuttings: Many flower friends often use the cuttings of longevity flowers can be soil cuttings, this kind of rooting survival rate is a bar, and the basic operation can take root and survive. However, the disadvantage of soil insertion is that it takes root slowly, and it is easy to turn black and decay.

Soil cuttings operation method: cut the top bud of the Ankang plant when cutting, about 5 to 6cm long, after the wound heals, pull out the cultivation soil, insist on the soil is moist, about 2 weeks later, you can start fertilizing.

4. Air rooting: Air rooting may not be so common, but it is also a cuttings method for longevity flowers. Flower lovers who have raised longevity flowers should find that the roots of the growing longevity branches are close to the surface of the potting soil and grow aerial roots, which is named the air rooting method.

And sometimes the leaves on the surface of the withered potting soil can take root on their own. This method can effectively prevent black rot in summer when high temperature and humidity.

Freshly cut longevity flowers should be watered thoroughly and placed in a place with scattered light and good ventilation for maintenance.

Longevity flower cuttings method:

1. The leaf cuttings of longevity flowers can be carried out all year round, but it is better to do it in summer and autumn. Before cuttings, prepare the cuttings bed, and the substrate for cuttings is fine river sand or well-drained sandy loam.

2. When cutting, first cut a certain length of branches from the mother plant, cut the leaves along the base of the stalk with a blade, rinse the incision with fresh tap water, place it in a ventilated and cool place, and wait for the juice at the wound to dry and then insert it obliquely into the substrate with a depth of 2 3 cm. After cutting, the substrate is compacted, then watered, and 50% wettable powder is sprayed once on and around the cuttings.

3. On the second day after the longevity flower cuttings, spray 01% sucrose mixed with urea once. Because the longevity flower is a pulpy succulent plant, the water content in the body is high, usually not watered too often, the substrate is too wet, easy to cause root rot, usually every 2 3 days watering.

On rainy days, take precautions to prevent rain. It can take root after about half a month, and the callus at the base of the petiole can grow small tiller buds after 3 or 4 weeks, and after the tiller buds are unearthed, spray 0-2% potassium dihydrogen phosphate and sucrose mixture once.

4. Thereafter, spray 0. every 10 days5% foliar nutrient solution of flowers, after one and a half months, can be potted and transplanted. The potting soil is preferably a well-drained, loose and fertile sandy loam soil, and after potting, it is watered every 2 3 days.

In winter, if the temperature is lower than 5°C, move people indoors for wintering.