What to do if the sink is blocked, what to do if the sink is blocked and you can t get into the wate

The kitchen sink will be blocked after a long time, which must be very nerve-wracking, so what is the reason for the sink to be blocked? What is the solution if it is blocked?

First of all, analyze the reason, if you find that the kitchen sink is blocked, the first thing to do is to close the water pipe, so as not to cause more water, do not try to flush the impurities down through the water, and then see what is blocking the kitchen sink.

So how to fix it? Generally, most of the places where the kitchen sewer pipe is blocked are U-shaped bends, if it is a sewer pipe with a sewage screw, it is easy to do, unscrew it directly, but it is best to put a sewage basin at the bottom before treatment, so as not to stain the cabinet. After unscrewing, use a steel wire to pass both sides, and it can usually be solved quickly.

If it has not been solved, you can remove all the sewer pipes, unscrew all the plastic connections, rinse them, remove the impurities inside, and assemble them in turn, which will be done in no more than half an hour.

The sewer pipes in your home are clogged with grease, so it will be better to pour a pot of boiling water into the sewer pipe first, and then dredge it with your hands or a tool such as a hook to reach into the drain pipe to remove the dirt that is clogged in it. If you live on the ground floor, check the outdoor sewer for fallen leaves or silt that can block the drain. When there is no obvious blockage in the drain of the sink or sink, the overflow hole can be plugged with a damp cloth and then the sludge can be removed with a wrench.

If you can't remove a blockage from the sink or sink drain using a wrench, you can place a bucket at the drain bend and unscrew the elbow to remove the blockage.

If the above methods do not work, it means that the sludge that causes the blockage of the drainage pipe is deep in the pipe, and the repairman should be reported in time to avoid the long-term blockage of the pool and water accumulation, in fact, it is best to find a professional master. If the sewer pipe is blocked by large debris, you should also find a professional company to dredge it. So as not to break the water pipes yourself.

It is to use a wet rag to roll into a roll to plug the floor drain first, and then use an air pump to pump the air from the sink to the air, and also use a rag to roll the air outlet pipe of the air pump into a thickness that is suitable for the water outlet of the pool to prevent air leakage.

1. Remove the drain screw. The most common cause of blockage is the blockage of the spike of the hetero-lead, you can remove the sewer pipe with the sewage screw, and then dredge the drain pipe with iron wire, and then reassemble the locust cloth.

2. Pour boiling water. The drain pipe of the kitchen sink may be greasy and solidified on the drain after it cools, pour boiling water to flush the oil down, and then use the hook to remove other foreign objects.

3. Water injection method. Find a pipe to connect one end to the faucet, and insert the other end into the sink drain, turn the faucet to the maximum, and flush the drain for a while to unclog it.

1. Due to the high frequency of use of the sink, it is inevitable that there will be some blockages after being used for a long time. If the sewer pipe is blocked, then we should first analyze it to see what is causing the blockage. If it's just because of some clutter, we can find something like wire to get the dirt out.

If it is the quality of the water pipe, then we need to replace the water pipe with a new one.

2. When we find that it is blocked, we need to turn off the water switch first to prevent more water accumulation in the water pipe. It is recommended that you do not immediately try to flush the impurities down through the water, but first look at what is blocking the kitchen sink. Generally speaking, the blockage of the sewer pipe is kitchen waste and oil stains, we can pour a pot of boiling water into the sewer pipe first, and then dredge it, so that the effect will be better.

If the drainage is not smooth at this time, we can use a wire to go down.

3. After our preliminary inspection, if there is no big blockage in the pool or sewer pipe, then we can first plug the overflow hole with a damp cloth, and then use a pinch to remove the sediment. If you can't remove the blockage from the sink or sink drain wheel with a wrench, then we can place a bucket at the trap of the drain and unscrew the elbow, so that the blockage of the drain pipe can be cleaned effectively.

4. Generally speaking, most of the blockages of the sewer pipe are U-shaped bends, and we should focus on this place when we look at it. If it is a sewer pipe with a sewage screw, then we only need to unscrew it directly, and after unscrewing, use steel wire to pass both sides, and the general blockage can be solved quickly. If it hasn't been solved, we can remove all the sewer pipes, unscrew all the plastic connections, and rinse them, so that the impurities inside can be cleaned.

However, it should be noted that we need to prepare a sewage basin first so as not to stain the cabinets and floors.

Second, the kitchen sink leakage solution.

Situation 1: The faucet is leaking.

Disassemble the red and blue logos of the faucet and replace the rubber pads inside.

Situation 2: The connection between the sink and the countertop is loose, and the water drowning into the countertop and leaking into the cabinet.

Buy glass strips and seal them at the junction between the sink and the countertop.

Situation 3: Kitchen sink drain pipe leaking.

Whether it is the leakage of the upper interface, or the leakage between the sink sewer pipe and the underground sewer pipe, the problem is on the rubber pad, the rubber pad is aging or cracking, there will be water leakage, then just disassemble the rubber pad and replace one.

Situation 4: The sink itself is leaking.

Apply waterproof putty to the sink leak.

Situation 5: Broken or loose sink parts.

Carefully check the position of the angle valve, screws and rubber pads to see if there are corrosion and aging problems due to too long use, if so, it is recommended to replace one again.

Remove the water pipe directly, and after removal, use iron wire or steel wire on both sides to dredge the congregation. Pour boiling water into the water pipe, and then use rubber pipes, hooks, etc. to reach into the sewer pipe to remove miscellaneous hail and cherry trees. Insert one end of the pipe into the mouth of the sewer pipe, plug it tightly with a worn rag or towel around it, fix the other end of the water pipe to the water pipe, and then turn on the faucet to the maximum and flush it for two or three minutes.

1. Remove the water pipe directly, and dredge it with iron wire or steel wire on both sides after removal.

2. Pour boiling water into the water pipe, and then use rubber pipes, hooks, etc. to extend into the sewer pipe to remove debris.

3. Insert one end of the pipe into the mouth of the sewer pipe, plug it tightly with a worn rag or towel around it, fix the other end of the water pipe to the water pipe, and then turn on the faucet to the maximum and flush it for two or three minutes.

Since the sink uses a large amount of water, the sewer pipe plays a role in draining water. What to do if the kitchen sink drain is clogged? PChouse will take you to find out.

1. The steel wire hooks out impurities.

If it is a vertical sewer pipe, we can bend the front of the wire into a small hook, and then remove the drain and use the wire to hook out the impurities. If it has not been solved, first enlarge half a basin of water in the sink, then clump a rag into a ball, press the rag in the water with both hands on the sink drain, press up and down like artificial respiration, and generally small problems can be solved, of course, you can also use a leather puff to solve.

2. Pour boiling water into the sink.

Generally, the cause of a blocked kitchen sink is that the fat hangs on the pipes, causing the water flow to flow slowly. At this time, the simpler solution is to boil a pot of boiling water and pour it into the sink, and then add some cold water to make the water temperature about 60-70 degrees.

Clogged pipes under the sink in the kitchen can be solved by drain dredging powder, installing an anti-odor filter cover, and using household pipe unclogging tools.

1.Sewer dredging powder. Add an appropriate amount of warm water to the sink pipe, then pour in a little sewer dredging powder, wait for about five minutes, and finally use warm water to flush the pipe.

2.Install an anti-odor filter cap. An anti-odor filter cover can be installed at the mouth of the sewer, which can prevent some large particles from entering the sewer pipe, thus affecting the flow of the pipe.

3.Choose household plumbing dredging tools. When using household pipe dredging tools, the general choice is a hand-cranked spiral steel wire, which can effectively dredge the pipeline of about 2 meters.

1. Use the pipe dredger, barb design, you can pull out the foreign body and hair in the pipe.

2. In winter, the weather is cold, and the sink is more likely to clog, so you can try soap and hot water. Boil a large pot of hot water, pour it into the sink, and put in a bar of soap, doing so in most cases will solve the blockage. If the chain is still clogged.

Repeat this method 2-3 times. It worked, and I've tried it many times.

3. Use vinegar and baking soda. Pour some baking soda into the sink drain and pour in a glass of vinegar. Vinegar reacts with baking soda and may solve the problem of clogged sinks.

4. Take physical dredging methods to disassemble pipelines and remove blockages. Generally, most of the places where the kitchen drain pipe is blocked are U-shaped bends, and the U-shaped pipe can be removed to clean up the blockage. However, it is best to put a sewage basin underneath before treatment to avoid soiling the cabinets.

5. Use pipeline dredging agent, remember to wear a mask and gloves when using it to avoid chemical damage to the body. Pipe dredging agents are also more effective, but may cause some corrosive damage to the pipes. I used it once and the plug in my sink was corroded.

I had to buy another one.

6. Use a water plucker. The rubber mouth is facing down against the mouth of the sewer pipe, pushing down hard, guessing that the air is forcibly pushed into the pipe, and when the rubber head is depressed, it is quickly pulled back, resulting in spike resistance and vacuum state, so that the blockage in the sewer pipe is loose or dispersed. Repeat this process several times.

It can basically restore the pipeline smoothly.

<> "What to do if the kitchen sink drain pipe is clogged.

2. Let's take a look at what blocks the kitchen sink, usually the kitchen sewer pipe is mostly blocked by the U-shaped bend, if it is a sewer pipe with sewage screws, it is simple, unscrew it directly, but it is best to put a sewage basin at the bottom before treatment to avoid staining the cabinet. After unscrewing, use a wire to pass both sides through, and it usually solves the problem quickly. If it has not been disposed of, you may wish to disassemble all the sewer pipes, unscrew and wash all the plastic connections, and remove the internal impurities before installing them, which can be done in no more than 30 minutes.

3. Usually, the sewer pipes at home are blocked by oil, so first pour a pot of boiling water into the sewer pipe, and then use hooks and other tools to reach into the drain pipe to clean up the dirt blocked in it. If you live on the first floor, check the outdoor sewer for fallen leaves or silt that could cause the drain to become clogged.

4. When there is no obvious blockage in the sewer pipe of the sink, you can use a wet cloth to plug the overflow hole, and then use a pinch to clean up the sediment.

5. If you can't clear the debris of the sink sewer pipe with a pickpocket, you can put a bucket in the trap of the drain pipe, and then unscrew the elbow to clean up the internal blockage.

6. If the above methods are not feasible, it means that the debris that causes the drainage pipe to be blocked is in the depths of the pipeline, and it is necessary to find a professional maintenance and grinding personnel or company in time to dredge it to avoid long-term blockage and water accumulation in the pool.

After reading the above introduction, I have a further understanding of what to do if the kitchen sink sewer pipe is blocked.