The living room does not have a ceiling, only a gypsum line in a circle, how to deal with the middle

One is to shoot the beam down and ring the plaster line, but this is rare. The second type is that most people have a middle beam in their living room that plays a load-bearing role. It cannot be canceled and can only be solved by other methods.

The captain said that our beams are load-bearing beams, and the first method is certainly not available. Is there an alternative? I anxiously asked the owner to quickly talk about the solution and stop selling!

The owner said that the middle beam of the living room could be used as a hidden decoration, as a separation of functional areas.

If your living room and dining room are open, you can use the middle beam as a partition and then route it directly, but this method is not suitable for other home decoration spaces. There is also a special treatment method that uses gypsum lines, which can be used to paste double plaster lines on intermediate beams. This method means gluing the plaster line to the upper and lower beams, which can make the space look more layered.

Or choose a custom large arc plaster line.

In fact, there are many shapes of plaster lines, and there is not only one in our imagination. Depending on the shape of the beam, we can choose a suitable curved gypsum line to stick to the beam. This stucco production line has an atmospheric appearance, is not expensive, and is not complicated to operate.

Therefore, it is advisable to deal with the intermediate beam in this way. After listening to what the owner has to say, my family will use this curved plaster line to stick it to the beam so that the beam and the surrounding plaster line will be fused together without any mutations.

The host said it was an acquaintance who introduced me in detail about what to look out for if you don't use the ceiling and just walk the plaster line. The plaster line must be cleaned before construction. The plaster line cures quickly.

It should be secured during installation, and its edges and corners should be aligned. After curing, clean the edges with clean water. It is very important to check the seams of the plaster line.

The connector must not have uneven connections.

Therefore, whether you don't use the ceiling, and directly use the gypsum line is also possible, as long as you choose the right decoration route, no matter how the decoration effect is extraordinary. Well, that's the way the article is, if you have any thoughts after reading it, you can leave a message.

Nowadays, people want to have as high a floor as possible in the houses they live in, so some people will choose to leave the room without a ceiling, and only use plaster lines as a decorative decoration. However, the disadvantage of not having a suspended ceiling is that the beams of the original roof cannot be covered, which is especially obvious in the living room, which is the largest living space in the family. So today, Yunsu will give you a specific talk about what methods can be used to design and decorate the beam without hanging the ceiling.

First, the side method.

Plaster lines are applied along the edges of the beams, the most common of which is to weaken the 90-degree angle between the beam and the top surface by using the gypsum lines at the dark corner, so as to visually reduce the abruptness of the beam. It should be noted that the shape of the plaster line should be concise and bright, and there should not be too many patterns. Because at a 90-degree angle, the pattern will be ugly if it doesn't match.

Second, the coating method.

The overall decoration of the beam, through the coating of the veneer or the color change of the paint, change people's perception of the original concrete beam, weaken the cold feeling of the concrete beam, and increase the sense of design.

3. Coverage method.

Along the edge of the ceiling, the beam is directly widened and covered, and the thickness of the beam is small, so the beam can be covered directly through the design of the ceiling. In this way, the ceiling is only made in the place where there are beams, and the other places are still the original roof, which does not affect the floor height. It can also be directly covered by special modeling, and this method should be used with caution without a designer doing the overall design!

Fourth, the camouflage method.

The bottom of the beam is thickened and spotlights are installed, and this method artificially creates the illusion of decorating the beam by increasing the thickness of the beam within 5 cm and installing ultra-thin spotlights. Or increase the number of beams so that the beams become part of the artificial decoration.

Fifth, the layered method.

If the beam is thicker, the side will look more abrupt. Then when doing decoration, you can use gypsum board to make a certain shape, or combine gypsum lines to decorate, to divide the original 24 to 30 cm thick side, so that this surface appears layered, weakening the overall abrupt feeling.

Sixth, collocation.

Add auxiliary beams, through the combination of main and auxiliary beams, so that the space presents the feeling of ancient house building skills.

7. Modeling method.

Summary: Either way, the presence of the beam is highlighted or weakened in order to improve the overall coordination of the top design and even the space design.

This intermediate beam can be knocked off directly, and the gypsum line is circled, but this situation rarely occurs. Generally, the middle beam is hidden when decorating, such as a partition.

It can be hung flat, and it can be hung flat with wooden boards, so that it will look better and more neat.

One is that the beam can be knocked off immediately, and the plaster line can be walked in a circle, but this phenomenon is very rare. The second type, that is, the middle beam in the large living room of most people's homes, has the effect of loading, and can not be knocked off, only by other methods to deal with it. The first way is definitely not usable.

There is also a special solution to use gypsum lines, which can be glued to two layers of gypsum lines in the middle beam, which means that the gypsum lines are stained on the left and right beams, which can make the space look more textured. Or choose to customize the large inclination plaster line, in fact, the plaster line is also divided into many types, and there is no single one in everyone's imagination.

We can choose the appropriate special-shaped gypsum line containing arc according to the appearance of the beam to stick to the main beam, this kind of gypsum line appearance air, the price is not expensive, and the actual operation is not complicated, so it is proposed that the middle beam use this treatment method. The gypsum line should be treated neatly before the operation, the condensation of the gypsum line is fast, and it should be quickly pasted when installing and using, and ensure that the two ends of the edge are aligned, and the edge should be cleaned up with cold water after condensation. It is crucial to inspect the part of the plaster line joint.

The connector must not occur in the case of docking problems and some incomplete conditions.

In some room structures, the large living room belongs to a large indoor space, and in order to better load the indoor space, it is inevitable that there are load-bearing beams. And how to effectively solve this load-bearing beam has become a troublesome thing in interior decoration. However, as long as the concept is not a landslide, there will always be a way to deal with it.

According to the application of gypsum lines such as large inclination and multi-grade or multiple gypsum lines with the application, the decorative design of the load-bearing beam is solved, so that the design style of the top interior space is unified, the decoration partition is done for the space, and the visual relative height of the beam is weakened, so as to reduce the awkwardness of the load-bearing beam in the space, and have the visual impact of "it is a beam, but it does not look like a beam".

Coffered ceilings are a cost-reducing solution for decorating load-bearing beams. It adds warmth and comfort to the large living room, and it looks luxurious and upscale. The original load-bearing beam is wrapped in gypsum lines, so that the beam is integrated into the indoor space, "the beam is not a beam, it is a part of the indoor space".

This type of form has certain regulations on the height of the building.

I think it would be nice to make the middle beam into an artistic shape and cover it up, or you can decorate it with plaster lines to make the whole look more harmonious and beautiful.

You can decorate the middle beam, which can play a better decoration role, and can also make the presence of this measure a little less.

The living room does not have a suspended ceiling, only a gypsum line, which will make the home look very simple and spacious, so the middle beam can be bypassed, and there is no need to care too much.

Do a simple circle of gypsum line, in the aesthetics do not lose back to the zigzag ceiling, but also easy to take care of, the zigzag ceiling is particularly easy to hide ash, after a long time the ash falls to the compartment, open the window after the wind blows, the living room will be directly sandstormed. If the budget is sufficient, you may wish to choose the ceiling, after all, there are still many advantages, such as thermal insulation and enhanced decorative effects, etc., of course, the economical point can also go directly to the gypsum line, which is currently the more mainstream choice.

Wood moldings to deal with the ceiling of the living room, you can try this scheme. For example, walk around the perimeter of the living room with wooden lines, and then use the wooden lines in the upper part of the living room to spell out various shapes and patterns you like. Then the installation of the chandelier hanging on this pattern ceiling is very simple, after the installation will not have an impact on the floor height, will not feel depressed, and looks more simple and atmospheric.

Plaster lines are used between paint or wallpaper and the ceiling to hide cracks, which is convenient for construction and is very high-grade.

Whether the corner line of the top surface or the ceiling is decorative, in fact, whether to do these shapes has a great impact on the decoration. It mainly depends on the overall decoration style and the overall collocation in the later stage. However, it looks dark all around, and at night this feeling is particularly serious, because the main light in the middle, decorative and brightness can not be both, the good-looking lights are not on, and the bright lights are not good-looking, but now there is another new option.

Match with a light strip. If the structure allows the ceiling to be made on the top surface of the space connected to the living room, one side of the living room is made of light strip modeling, and the top surface of the living room can be directly on the original roof, so that there will be a sense of hierarchy and blurring the "boundary" of the adjacent two spaces. line, with two layers of plasterboard staggered, the actual effect is obviously better than the neighbor's suspended ceiling, and the house appears tall and spacious.

It should be noted that the renovation of the circuit should be planned in advance, and the circuit cannot be hidden without a suspended ceiling, so I chose no main light, with track lights and surface-mounted spotlights.

It is also possible, so that the decoration style looks natural and comfortable, and it is also simple to save a lot of money in decoration, and it is necessary not to be too complicated.

It's also okay, and if the overall style is matched, it can also have a good effect. Do not do the ceiling not only look at the overall decoration effect, but also look at the height of the lower floor, do not do the ceiling can find some hanging decorations or lighting is also possible.

The idea of choosing not to walk a wide gypsum line without a ceiling is actually possible, because the current decoration concepts are actually very extensive, and you can ask the workers in charge of decoration.

OK. And in this way, it is also more economical, and this decoration style is also very simple, and does not need to spend a lot of time and money.

Yes, it saves a lot of time, saves a lot of money, and it is also very convenient and fast, but it is a little bit of a bad image.

It is also possible, although it is not as good as the visual effect of the ceiling, but the practicality is also very strong, and it is not particularly expensive.

Absolutely. This decoration method can reduce the cost, and it can also achieve an aesthetic effect, which can make the home more upscale.

Yes, if you don't have a suspended ceiling, you have to go through a plaster line, which looks more beautiful and looks more visual.

OK. This decoration method is also very good, and the home is also very neat and clean, and it will not have any impact.

Of course, you can, and this way will not only make the living room look very good, but it will also save money.

The first thing to understand about this problem is the purpose of choosing a suspended ceiling or walking a gypsum line, which is nothing more than decorative and aesthetic. First of all, it is certain that if the decoration is the living room without the ceiling, it is completely possible to only take the gypsum line, and as long as the style is good, it is still beautiful and generous, of course, in addition to the gypsum line, there are many other ways not to hang the ceiling In order to hide the downlight, the ceiling will generally be accompanied by a hidden downlight, one is for lighting, and the other is to improve the decoration grade.

The decoration of the roof of the living room, I personally recommend that you use a large flat roof, as for the gypsum line can take the gypsum line or not, I don't think it has any impact. It's all good-looking. If you feel that using only plaster lines is a bit monotonous, you can choose to decorate it with a side ceiling.

To put it simply, it is a straight edge shape of gypsum board around the roof, and different gypsum board widths can be used to create a false sense of floor height. Focus on soft furnishing accessories. Only making a wide plaster line around the top surface and focusing on the later soft decoration accessories will also have a very stunning effect.

Absolutely. This decoration method can make the home appear more simple and generous, without reducing the height of the floor, which is a good choice.

OK. Because my house is decorated in this way, and it seems that the living room space is relatively large, not worse than the ceiling.

Yes, because the ceiling is no longer recommended to be installed, and the ceiling is very difficult to clean, directly taking the gypsum line is the fastest way, and it is also the most beautiful and easiest way.

Of course, it is possible, the ceiling is actually useless in the living room, and the wires and cables can go underground, so the gypsum line is beautiful and cheap.

Gypsum line is the decoration material of the house, the main interior decoration. It can be brought with a variety of patterns, practical and beautiful. It has the functions of fire prevention, moisture prevention, heat preservation, sound insulation, heat insulation, and can play a luxurious decorative effect, how to identify the gypsum line?