-
After buying a new home, many people have encountered the situation of having beams in their homes. Everyone knows that it is somewhat unlucky to see beams in the house, so avoid them when decorating. However, there are many apartments that are too short, and it is more depressing to install a ceiling, and some people don't like to have a ceiling at home, so how can it be handled?
In fact, there are many ways to design smartly, but people don't know it! You can also use the beam at the top to make a small bar below, which can also play a partition role. With the small chandelier on the beam, it just gives the home an extra leisure area.
One is that the beam can be knocked off directly and walk the gypsum line in a circle, but this phenomenon is rare. The second type, that is, the middle beam in the living room of most people's homes plays a load-bearing role, which cannot be knocked off, and can only be solved by other methods. The master said that the beams in our house are load-bearing beams, and the first method must not be used.
The ceiling modeling treatment of the partition space is usually suitable for the beam to be at the junction of the living room and other spaces, and the beam treatment is usually directly made into the partition design of 2 spaces, combined with the design of the overall ceiling shape, which is relatively simple and atmospheric. The living room has beams, and you can also use the beams to make an arch design to separate a space, weaken the role of the beams, and make the home have a garden style. However, this style is not suitable for small families, and it will be more limited in space.
And one more isSpecial treatment is done with gypsum linesYou can stick a double-layer gypsum line on the middle beam, which means that the gypsum line is glued to the upper and lower beams, which can make the space look more layered. In fact, gypsum lines are also divided into many shapes, and there is not only one type as we imagined. We can choose the appropriate special-shaped gypsum line with curvature according to the shape of the beam to stick to the beam, this gypsum line has an atmospheric appearance, is not expensive, and the operation is not complicated, so it is recommended that the middle beam use this treatment.
Since we can't do a whole house ceiling, we can hide the beams through a partial ceiling, make the living room a functional distinction, and enhance the brightness in the low area through hole lights. It will not appear to be depressing and affect the visual experience. It can also make the home more layered.
-
If the beam is located near the entrance, it can be designed along the beam to create the feeling of a floor-to-ceiling screen, and the two sides of the beam are curved to form a partition between the entrance and the living room, which will be very clever visually. If the beam is in the living room, you can make a decorative surround of the beam, and the surrounding design is more cylindrical, so that you can pretend to be one of the decorations in the living room, see how to combine it with the lamps, try not to make the beam appear more abrupt, so it is also a perfect decoration method. If the beam is located in the living room, if the place is suitable, it can be treated as a sofa area, so that the beam can be decorated into a lamp module, add a little soft small lamp, in this way, in some cases, you can turn off the light in the living room, turn on the small lamp, it will be very meaningful.
But in general, there are really many ways to deal with the beam, and you can let the decoration company come to check and make a few more sets of plans for our reference.
-
If you don't have a suspended ceiling, the beams are really in the way, it is recommended to use the ceiling modeling design, through the ceiling modeling, the beams can be included in it, which is the use of multi-level and curved modeling, through the ceiling level, the beams are integrated into the ceiling modeling.
-
In the case of not suspended ceilings, you can choose baseboards, as long as you look good
-
You can put a wallpaper in a nice color and then choose a characteristic headlight so that you avoid hollowness.
-
The treatment of the top beam often tests the designer's design ability, if the beam is in the living room, not only will make people feel oppressive and uncomfortable, its position is just around the important space, then there is a beam ceiling in the middle of the living room, how to decorate?
First, the shape of the partition space.
In the living room, the beam across the living room is generally at the junction of the living room and the dining room, this kind of beam is easier to handle, the living room and the dining room are separated from the ceiling modeling, and the beam can be used to do the division, one side is at a level height with the beam, and the other side is more than 10 centimeters lower than the beam surface, and the stepped division space is made; If the beam is on the edge, it can be made into a hollow shape, leaving the light groove and installing a light tape to cover it to hide or divert attention.
Of course, there are self-built houses, and the beam with a large span will definitely be in the middle of the living room, which can be done in parallel with the beam, so that the beam can not be seen carefully, and the living room can also be divided into two halls, one for the living room, one for the dining room, or a leisure world.
Second, false beam modeling.
The false beam shape is more suitable for the situation that the beam is in the middle of the space, and the beam height of this type of house can be used to hang the ceiling if the floor height is sufficient, but usually the floor height of the house type is not so high, so it is necessary to find a way to deal with the beautification of the beam, and in terms of beautifying the beam, the false beam shape is usually very good.
3. Be bold and "leave blank".
The so-called bold blank space is not to do special treatment of the beam, such a bold treatment, requires a very careful design. If the beam is at the boundary of the space, the top beam and the wall below are painted with latex paint of different colors to make the space appear more layered. For the space with a large floor height, the beam that is not directly treated is actually quite generous.
-
There are beams in the living room, it is best to make a special-shaped ceiling, if the beams are wrapped, the home is a little low,
-
It's a pity, because the process of finding a house and choosing a house is very painful, and it is often several at a glance, and it is good to decorate it into a bar counter where there are beams, which is both beautiful and increases the mood of life. months. If you can experience the beams in the living room, you have bought a house with beams on the roof, how to decorate it?
Don't bother, the clever designers have come up with quite a few solutions, even if there are beams, although it is in the way, but it is for the room".Skeleton", aboutBuilding safetyYesIt must not be demolishedand also can not be on the beamPunch or groove。Beams can also make your living room beautiful. If the design is better, then it can be worth buying yourself.
Below the top is the living room, such a big "beam top", is a very troublesome thing, must be the top to the ceiling treatment, since it is the living room must be the main place of activity, very important, if from an economic point of view, the money in this place must be spent, can not save the living room and the corridor between there is a beam, I put the beam under the ceiling, so that the corridor ceiling appears a little lower. In this way, the living room is not as high! But this way it looks layered.
I feel so comfortable! Do you think it's okay? The beam shown on the film is obviously located between the living room and the dining room, and the whole is not suspended, so the beam will appear very abrupt, and the best way is to make him "disappear".
Make the cabinet connected to the bottom of the beamTherefore, when decorating, I want to treat these beams. So what are the treatment methods for beams? The following question is used as an example to answer this question.
There is a beam on the top surface of the living room, and the effect of weakening the beam is achieved by brushing the same color latex paint on the top surface, which is the visual transfer method to transfer the visual center of gravity. into a partition, and at the same time make a pass sleeve on the side of the aisle.
Oh, about the kind of courtyard house-like beams, it seems that they are generally made of tung oil, and do not need special treatment, of course, if you want to beautify, you can refer to the beams of ancient buildings.
-
Yes, the bottom of the flush board is used as a ceiling shield, which can wrap the beam and prevent it from leaking out and looking ugly.
-
Suspended ceiling covering.
In fact, it is the most common thing to use the ceiling to cover the beam, but the place of the beam is different, and the beam is covered in the ceiling.
-
For example, the beams of residential buildings will not be exposed, they will be covered by decoration, some beams are small and suitable for ceilings to cover, and some are relatively large, for example, teaching buildings will expose beams. It's best to paint the beams with some nice lacquer or paint them in oil.
-
You can make a picture of the beam, which will look better.
-
Answer kiss Hello, there are girders in the living room, you can do this, the top surface of the paint-free board ceiling, do fake beams for embellishment, so as to block the existence of the original girders There are girders on the side of the living room, if the floor height allows, you can do a plane or modeling ceiling above the girders, although the original floor height is sacrificed, but it can weaken the depressive feeling of the girders There are girders in the middle of the living room, you can do false beam modeling in the dining room, and make a local ceiling in the living room to weaken the existence of the girders Use local ceilings and hollowouts to weaken the depression of the girder above the head of the sofa Larger space, if the floor height is high enough, you can completely integrate the girder into the ceiling modeling, hide it The shortcomings can also become advantages, the girder on the top of the living room, the use of the modeling ceiling directly covered, with gorgeous wallpaper paving, but has become the highlight of the home design.
-
It is best to design some beautiful patterns or creative shapes on the top, which can effectively hide the beams of the roof, and look particularly beautiful.
-
It can be used as a natural divider to separate the two places, and if that doesn't work, put some plaster line to make it look less obtrusive.
-
Many people want a beautiful and atmospheric video wall, but the biggest problem comes. Without any renovation experience, the design of the TV wall really did not meet the design requirements. It's really frustrating.
Some houses are always unsatisfactory, like beams on the roof. A common treatment method is to install a ceiling and hide it. But in fact, "clumsiness" is not the only solution.
So, how to beautify the beams of the living room without a suspended ceiling?
First, the character is shaped and the beam is weakened.
The addition of plaster beams to the living room beams can weaken the abruptness brought by a single beam in the living room, and the cross shape can also improve the aesthetics of the living room and make the top of the living room unique.
Second, it is a layered design to reduce the sense of oppression.
A heavy ceiling makes the top surface unattractive, but if the ceiling is designed to be multi-layered, it can give the top surface a rich layer; It can also get rid of the same top-floor style, effectively enhance the top-floor aesthetics, and make the living room more distinctive; In the end, I succeeded in "hiding" the beam, believing that it would not be easy to detect the existence of the beam without careful observation.
Three, combined with lighting, blur the beams.
With the help of lighting, through indirect lighting, the sense of hierarchy can be increased, so as to reduce the visual beams in the living room space and achieve the effect of blurring the beams.
Fourth, the same color treatment.
When dealing with exposed beams, the easiest way is to paint the ceiling with white beams, and the walls can be light gray. Install some personalized chandeliers with wooden furniture and flooring to make the whole space look very simple.
The living room has beams, but if the ceiling height of the living room is high enough, you can choose to hide the beams in the ceiling or blend them into the ceiling design. The beams hidden from the ceiling can be hung flat or full. The ceiling is flush with the beams, and the interior wrap reduces the visual oppression, creating a well-defined and aesthetically pleasing living room.
In the design of the integrated ceiling, you can choose to make false beams or modeling cranes, combine the ceiling of the beams to decorate the top of the entire living room, and then achieve the effect of layer by layer through the lighting blessing in the later stage.
-
When dealing with the beams outside the dew, you can paint the beams and the ceiling white, you can choose light gray on the wall, install some personalized chandeliers, you can choose to make the ceiling measurement into cement texture, and install black spotlights on some black pipes, the overall style is very individual.
-
In fact, the most appropriate way is to use the wall color and appropriate shape to reduce the visual impact of the beams. The owner of the house made plaster lines on the walls and painted them with gray paint, which successfully concealed the abrupt beams from the vision.
-
I think the best thing to do is to just scrape the white, if the roof is white throughout, the beams will not be so conspicuous.
-
In fact, the most appropriate way is to control the color of the wall and the appropriate appearance to reduce the visual impact caused by the beams. The owner of the house made plaster lines on the walls and painted them with gray paint, triumphantly hiding the abrupt beams from the vision.
-
Generally, the design of some false beams is selected with some lighting, which is very beautiful. For example, the top of the head is designed with a field grid, an extra beam is added, and some warm lights are added around the beam.
-
You can make some decorative lights on the beam, or paint it in color, you can also draw some pictures on the beam, and you can wrap the beam with beautiful wallpaper.
-
Then you can add a few more touches. For example, it is covered with tassels or a beam with a piece of fabric. It doesn't look so bare.
Introduction: Some people choose to install a very good-looking ceiling when decorating their living room, because in their eyes, this ceiling will make the whole living room more tall, and if someone comes to visit the house, they will also feel very face-saving, but they feel that the living room with a hollow ceiling is very good-looking, so what are the advantages of this living room without a ceiling? <> >>>More
When choosing a suspended ceiling, you should choose according to the height of the house. The layout should be arranged so that the space can be used reasonably.
Water temperature control. When soaking dried bamboo shoots, if you take cold water to soak the bamboo shoots, it is generally not easy to boil, we can use boiling water when soaking, boiling water to soak the dried bamboo shoots, which can make the dried bamboo shoots absorb water faster, easier to soak soft, easier to cut into shredded bamboo shoots, and easier to cook rotten during the stir-fry process. >>>More
In the early stage of cough, you can drink some licorice tablets and anti-inflammatory tablets.
If the well water is severely green, the following steps can be taken: >>>More