Why is there a white dot on the screwing pin next to my Armani AR11091 watch?

The Armani AR11091 watch has white dots on the screwing pin next to it, which may be a sign of rust or mold.

If your watch has a quartz multi-hand movement, such as the AR11091, its structure usually includes a chronograph wheel train with two layers. The small seconds hand at 6 o'clock is the everyday seconds hand, and its train is located under the second layer of bridges. If the small seconds hand does not move, it may be due to a problem inside the movement, such as damage to the gears, bearings, etc., or insufficient lubrication.

In addition, the white dots can also be chemicals left over from the manufacturing process of some watches, such as certain lubricants or cleaning agents, etc. These substances usually evaporate or are naturally removed after a period of time, but it is also possible to remain in some cases.

If the presence of these white dots makes you feel uncomfortable or worried, it is recommended that you take your watch to Armani's after-sales service center for inspection and cleaning. A professional technician at the service center will be able to accurately determine the nature of these white dots and handle your watch appropriately.

It's broken, go to the after-sales service!

This quartz multi-hand movement is made up of two layers of chronograph wheels, the small seconds at 6 o'clock is the daily seconds hand of the eight longitudes, and its wheel train is under the second bridge, if it does not go, it is a problem.

I also received an identical one, the buttons were white, I remember that this button should be the same color as the dial... Is this fake?

Below is the second hand, above is the chronograph minute hand, the longest is the chronograph second hand, and the chronograph second hand runs one lap and the chronograph minute hand goes one square.

1. There are 3 small discs that are chronographs, which are counted, minutes and seconds respectively. The top button on the right, the timer starts and resets; The bottom button on the right side, pause and resume the timer; Right middle crown, adjust the time and date. All three sub-watches belong to the stopwatch system used to keep time, with a sub-watch at 2 o'clock indicating the seconds, a sub-meter at 10 o'clock indicating the minutes, and a sub-watch at 6 o'clock indicating the hours.

2. Specific steps:

1) Press the button above, and the three sub-watches of the chronograph will start the timer. The small watch at 2 o'clock indicates the number of seconds, i.e. it jumps one block for every second after the start of the timer;

2) The small watch at 10 o'clock indicates the number of minutes, that is, it jumps one step every minute after the start of the timer; The small watch at 6 o'clock indicates the number of hours, i.e. it jumps one block for each hour after the start of the timer.

3) Press the button below to end the timer. You can read the indicators on the three sub-tables to know the duration of the exercise. Press the upper or lower button again, and the three sub-watches will reset to zero, and you can start the chronograph again.

The model is not the same. The purpose is not the same. There are the following types of subdials.

1. Stopwatch. It's the second hand. Usually this subdial is directly below the large dial. This kind of watch uses a subdial as the second hand. You think it's the big hand of the second hand, but it's the chronograph indicator hand. You shouldn't usually move it. If you move, it consumes a lot of power.

2. Twenty-four hours instructions.

It means 24 hours. You're 14 p.m. The subdial points to 14.

3. Calendar. 31 scales, pointing there, that day.

4. Weekly calendar.

You can see this directly.

5. Monthly calendar. There are a total of 12 scales.

6. Chronograph minute hand.

It's like 1 says. **The indicator hand is the chronograph hand of the running watch. Timer. Now this disc is the chronograph minute hand, 7, the chronograph hour hand.

It's the chronograph hand.

Hold the watch in your left hand, with the dial facing you and the 12 o'clock position facing up, and turn the crown with your right hand, and the crown needs to be pulled out, which is divided into two positions (please note the force).

1st gear (slightly pulled): Thumbs up to rotate the crown (clockwise) - Adjust the date Thumbs down to rotate the crown (counterclockwise) - Adjust Tuesday gear (fully pulled): Thumb rotates the crown --- Adjust time precautions.

It is not advisable to manually adjust the watch between 9 o'clock and 3 o'clock.

Because this period is the running time of the calendar function, it is easy to cause gear damage if you manually adjust the watch, so avoid this time and manually adjust the watch after the calendar jumps, otherwise it will cause wear and tear on your watch.

Suggestion: Adjust the calendar to the previous day, pull out the crown to the second position (fully unplugged), rotate the crown all the way up (clockwise), wait for 24 hours after the clock hand turns the calendar to automatically jump to the correct date, and then continue to adjust the correct time today.

I remember that my watch is this model, the dial on the far right is divided into morning and afternoon, the left and below is the stopwatch, the one below shows the second, the one on the left shows the minute, the stopwatch function is timed for up to one hour, the right is twisted in the middle, the top is the stopwatch, the stopwatch starts, pauses, and the bottom stops the stopwatch rotation (still timed, pressing it again will quickly go to the current timekeeping time) Timing zero, that's all

Respectively, they represent, minutes, seconds, hours, otherwise what can be.

How much did you buy this, I've been looking for it these days.

1. Look at the appearance: look carefully at whether the polishing techniques of the watch are delicate, the polishing of famous watches is very particular, and the coherence and perfection are integrated, while the craftsmanship of fake watches is far from it.

2. Comparison of watch movement and logo. A fake watch movement can be seen at a glance from the logo, and the fake is gone. **The original movement is legible. You also have to listen to the sound of the movement of the movement, and the sound of the original movement is generally clear and crisp.

3. When identifying the authenticity of Armani watches, they can also be distinguished by stability or actual durability. Generally speaking, the performance of fake Armani watches will be relatively poor.

1.Craft. The workmanship of the real watch is delicate and delicate, the seams are tight and flexible, the corners are smooth and cornerless, and the electroplating is symmetrical and bright.

The deed on the surface and on the reverse is clear. 2.Wrap.

The packaging of the real watch is very exquisite, the watch box is very beautiful, and there are beautifully built manuals or warranty cards inside; Fake watches are coarse, or even have no such packaging. 3.**。

The real watch has an official invoice, and the selling price will not differ too much from the official price. If there is too much difference with the official price, it is a fake watch. For example, a few hundred dollars will not buy the real Armani watch.

If you can't distinguish the authenticity of the watch as usual, then take it to the watch store and ask the master to check the movement (the difference between authenticity and fake is first in the movement), and you will know immediately.

The use of the chronograph function: the chronograph must have the function of recording seconds and minutes, now most chronographs have three subdials and two buttons, different brands and models of subdials and buttons are also different in position and shape, but how to change the case and dial design, are inseparable from these several indicator scales.

The subdials are: minute counters, hour counters, and small seconds counters. (Some watch subdials have: 24-hour system, tenths of a second), the two buttons are: chronograph start and stop, chronograph zero reset.

You can see the instructions, the so-called big second hand is actually the second hand of the chronograph, and the small circle is the second hand, and if you want the big second hand to go, just press the top button and go, and the bottom one is reset -- for the Armani with the timer.

ps The so-called big second hand should be a domestic high imitation.

I'm also Armani's ar1648, and the big seconds hand doesn't go, and the date is not accurate.

Just tighten the screws inside.

Armani's big magic hand does not go, is the small seconds hand the standard? Otherwise, it's a domestic high imitation, brother die, this can't be nonsense, is there a watch to say, I used 2 Armani three-eyed watches, all of them are Da Miao needles go normally, and now this problem also occurs, Da Miao needles do not go, toss and go, I suspect it's broken. Or it's stop-and-go caused by a lack of power.

If it's a new watch, you may have been scammed. If you have been using the watch, you should take it to the master to maintain the washing oil.

There are 4 digits at the beginning of AR on the back cover of the watch, which is his style number, and the details of the model can generally be found on Armani's official website.

Gimani watches.

Founded at the time and a lot of Swiss watches.

In contrast, in the past few decades of development, it has continuously followed the trend and launched four watch series, namely the retro series, the sports series, the fashion series and the BLU watch series, which have different styles and reflect the concept of Armani's diversified development.

It's a serial number. The normal Armani EA model has a 4-digit number starting with AR at the back, such as: AR0204, AR5897, etc., which is considered the Armani style number.

There is no year, month and date on the back of the Anima watch, and Anima's cosmetics only have, but the watch does not! The watch does not have! The watch does not have! Don't be misled.

The first six digits represent the year, the month and the date, and the last few digits represent his flow.

On the right is the 24-hour clock, which distinguishes between morning and afternoon.

On the left is the small seconds.

Below is the chronograph minute hand.

liuzixi822102

Giorgio Armani itself is not a professional watchmaker, and others have helped it to OEM ** and fake, the same as the Japanese movement, there is no difference.