How to prune the branches and leaves of wisteria in winter, should the leaves be cut all out, and ho

In winter, wisteria will go dormant and the flowers and leaves will all fall off, at which point a re-pruning will be required. Only 2-3 buds remain on each branch, and the rest need to be cut off. In addition, it is necessary to cut off all the side branches of the twigs on the plant that are not growing vigorously.

1.In winter, wisteria goes dormant and all the flowers and leaves fall off, so it is very convenient to prune the branches. At this point, re-pruning is required, leaving only 2-3 buds on each branch, and the rest of the buds need to be cut off.

In addition, it is necessary to cut off all the side branches of the twigs on the plant that are not growing vigorously. This reduces nutrient consumption and allows the plant to concentrate nutrients on the remaining shoots to ensure that enough flowers are produced. After winter pruning, place the plants in a place where the temperature is between 5-10.

At this time, it is in the dormant period, and it is more conducive to dormancy in such an environment, which is very good for its growth and flowering in the next year.

1) Pruning and shaping: the growth form of wisteria trees is different, pruning can be carried out according to personal preferences, the wisteria tree can be pruned into oblique stem type or weeping type, the long branches are shortened, the over-dense branches of the plant are thinned, and the branches that affect the growth of the plant are cut off.

2) Maintenance and thinning: the growth of wisteria trees is vigorous, so in the process of maintaining wisteria trees, it is necessary to regularly thinn the plants, and when the wisteria trees appear too long branches, too dense branches and branches that affect the growth, they should be pruned in time to reduce the consumption of nutrients and promote the growth of wisteria trees.

3) Pruning after flowering: After the flowering period of wisteria trees, it is necessary to cut off the failed flower branches and various useless branches in time, and reduce the branches of the current year by 15 cm to ensure the main growth of the plant, which is conducive to the growth of the wisteria tree, and promote the large flower spikes in spring, and naturally droop when flowering.

4) Long branch pruning: In winter, the wisteria tree will enter the dormant period, at this time the plant growth is slow, the branches of the wisteria tree should be combed, and the branches that grow too long should be reduced, but at least three to five bud points should be retained to promote the flowering and flourishing in the next spring, and also avoid unnecessary consumption of nutrients.

2.If wisteria is planted in the north, the best way to preserve it is to move the outdoor wisteria to an unheated room, or place it in a cooler room such as a north-facing balcony. On the one hand, it prevents the outside temperature from being too low and frostbitten wisteria, and on the other hand, it also prevents the heating from overheating in the northern winter and makes the hibernating wisteria wake up.

3.If you do not have the conditions to move indoors in the north, you can also follow the example of the south, bury the pot in the soil, maintain the temperature of the pot, and then spread it on the ground with plastic film and cover it with straw, soil and other warmth to keep warm. The branches also need to be wrapped in straw, plastic film, etc., to maintain temperature.

In general, the temperature at which wisteria is kept in winter should be between 5 degrees Celsius and minus 5 degrees Celsius.

Hello, wisteria can climb and grow and bloom even if it is managed extensively and not pruned. For the pursuit of vigorous growth and spike multi-flowering landscape effect or space needs, etc., pruning should be reasonable. If you want to do tree-like wisteria or bonsai ornamentation, careful pruning is very necessary.

Generally, pruning is mainly done twice a year, after flowering in summer and in winter. After flowering, prune the newly sprouted long branches back to about 15 cm. Sometimes, some of the pods can be kept for winter viewing.

After the leaves fall in winter, prune the long branches pruned in summer until 3-5 buds remain, and remove all the branches that are not in harmony with the skeleton. In addition, in early spring, the useless shoots on the backbone branches should be removed as soon as possible to facilitate the inflorescence to strengthen the flower buds.

Wisteria is a leguminous plant with a nitrogen fixation effect on the root system, so it is not easy to bloom due to excessive nitrogen fertilizer and excessive vegetative growth of branches and leaves when fertilizing.

FYI.

Wisteria flower buds differentiate from late May to late June, when flower buds are formed by the axillary buds of new shoots and the axillary buds at the base of flowering branches. Depending on how well the flower buds are formed, pruning is done after flowering. Dry branches are pruned in winter, and dense branches are pruned in summer.

Because the flower buds are mostly born in the lower part of the branches, if they are allowed to grow naturally, the upper leaves can grow into many long branches after the buds germinate, so that the flower buds can not bloom normally. Therefore, only a few leaf buds are retained and then truncated to promote the formation of flower buds in the lateral branches, and the budding and long branches are controlled. The wisteria branches are easy to shape, and they are reasonably distributed on the trellis by tying them so that they can be ventilated and let in light.

1. How wisteria is pruned into a wisteria tree.

2. How to prune wisteria into a tree.

3. How to prune wisteria trees.

4. Can wisteria be pruned into a tree shape?

1.Wisteria is a climbing vine plant and will grow on other items, so if you want to prune it into a wisteria tree, you need to prune it many times, and it must not be entangled, so that it has the ability to stand on its own.

2.Prune off overly long branches, entwined branches, long branches, and overly dense branches in time, and only keep the main trunk branches and strong branches.

3.It takes a long time to grow into a wisteria tree, so you have to be patient.

4.In addition, it is also necessary to pay attention to the usual management of the dismantling and maintenance of the family.

Wisteria is a plant that is perfect for bonsai, and if you want wisteria bonsai to be more ornamental, proper pruning is essential. How do you prune wisteria bonsai? First of all, the shape of the wisteria bonsai should be fixed, and then it should be appropriately modified and cut according to this shape.

1. Trim the shape

The first thing to do is to trim the shape, each wisteria growth form is different, so choose the shape according to personal preference. Wisteria bonsai has various forms, such as oblique dry type, where the main trunk of the bonsai grows obliquely to one side; Weeping type, that is, the main trunk is short and grows vertically.

These two are the most common modeling methods, and then according to the shape of the heart of the plant to carry out appropriate pruning, the long branches are shortened, dense branches are thinned, and some branches that affect the shape can be cut off. After the styling is completed, all that remains is reasonable pruning and maintenance.

2. Maintenance and shearing

And how to prune a good wisteria bonsai? Then you need to prune and maintain its shape frequently, when there are too long branches, too dense branches and all kinds of branches and leaves that affect the shape of the plant can be cut off in time, so as to save nutrients and promote the growth of the main branches, so that the shape is more plump.

3. Prune after flowering

After the wisteria bonsai flowers wither, it is necessary to prune off the broken flower branches and various vegetative branches in time, and also need to shrink the branches of the current year to about 15 cm, to maintain the main framework of the wisteria bonsai, and then prune, which can greatly promote the growth of wisteria.

4. Long branch pruning

In winter, the wisteria has already fallen its leaves, and at this time, you can see the overall branch frame of the bonsai, which is more suitable for pruning. At this time, some excessively long shoots should be reduced, but at least 3 or 5 bud points should be left to promote flowering and avoid consuming too many nutrients.

1. Watering appropriately

Wisteria needs a lot of water when growing, but watering too much water is not conducive to flowering, so you can usually keep the potting soil slightly dry and follow the principle of dry and thorough watering. When wisteria sprouts sprouts, watering should be reduced appropriately, so as to prolong the flowering period and resume watering after the flowering period has passed.

2. Apply more fertilizers

If you want wisteria to flourish, you need proper fertilization. During the period of wisteria growth, cake fertilizer water can be applied every half month. Phosphorus and potassium fertilizers should be appropriately applied before flowering to promote flower bud differentiation. Stop fertilizing after flowering to prolong flowering.

3. Turn over in spring

It is best to repot wisteria bonsai every 2 or 3 years, and try to repot as early as possible, which is best when it sprouts in early spring. It can also be replaced with a larger pot and more fertile and loose new soil, which is more conducive to growth.

4. Pest control

Wisteria does not have many pests and diseases, but it can also be infested by aphids and leaf moths, and after the insect pests are found, they can be manually killed, and then they should be sprayed with insecticides such as trichlorfon and dimethoate.

Conclusion:After reading the above content, I believe you should know the pruning method of wisteria bonsai, reasonable modeling and daily pruning and maintenance, in order to make wisteria bonsai more ornamental value and better growth.