Is it okay for a load bearing wall as long as it doesn t knock on the beam?

Yes,As long as it is a black wall marked on the structure drawing, it cannot be knocked off directly. Because there are beams of the load-bearing walls.

It can play a role in supporting the upper part of the structure, if it is knocked out, it will affect the structure of the whole building, and have a great impact on the load-bearing capacity.

The load-bearing wall is scientifically calculated, and if the load-bearing wall is drilled and decorated, it will affect the stability of the foundation, which needs to be paid attention to.

Provisions. Article 26 of the Ministry of Construction's "Regulations on the Administration of Seismic Fortification of Housing Construction Projects" stipulates that if the seismic components, seismic isolation devices, shock-absorbing components or seismic facilities such as the first response observation system of the building are changed or destroyed without authorization, the local people at or above the county level shall be responsible for it.

The competent department of construction ordered corrections within a time limit, and imposed a fine of less than 1,000 yuan on individuals and a fine of between 10,000 yuan and 30,000 yuan on units.

In addition, there will be residential property management regulations in various places, including regulations on load-bearing walls, such as Shanghai's "Shanghai Residential Property Management Regulations".

Article 41 stipulates: "In violation of the provisions of Article 26, Paragraph 1, damage to the load-bearing structure of the house, the district (county) real estate management department shall order immediate correction, restore the original state, and may be fined not less than 10,000 yuan but not more than 100,000 yuan; where the circumstances are serious, a fine of between 100,000 and 200,000 RMB may be imposed. ”

Under normal circumstances, it is possible to do without knocking on the beam.

Because if there is a beam to bear the load, then in most cases, the weighing wall can support the wall of the upper floor, at this time, the first part of the project is shown above the black wall, if it is knocked out, it may damage other buildings.

All in all, it may affect the bearing weight of the wall, and it will be difficult to distinguish between the structure.

References. Under normal circumstances, if it is your own house, the floor slab is also general, and the beams will be divided in this case. Generally, the structural columns given are also built on the basis of transmission, and the structure formed is like the bones of the human body, which must be carefully judged one by one.

In addition, the weight of the floor slab that can be supported in general, as well as the weight of the furniture in the house, are exquisite. Therefore, the material it uses is also relatively light and thin, and in most cases, it is only to separate the distance between the walls.

If such walls are knocked down or destroyed, the consequences may be unimaginable, as the entire building may be directly affected. Therefore, under normal circumstances, do not remove the load-bearing wall without authorization, because the load-bearing capacity inside is also different, and the construction must be approved by the property before it can be carried out.

No, as long as it is a black wall marked on the structure drawing, it cannot be knocked out directly. Because of the load-bearing wall with beams, it can play a role in supporting the upper part of the structure, if it is knocked off, it will affect the structure of the whole building, and have a great impact on the load-bearing capacity.

This is equivalent to the bones of our human body, if the bones are broken, the whole person will not be able to stand up. In the same way, if the load-bearing wall is broken, it is equivalent to breaking the bones, and the house may collapse directly.

Load-bearing wall precautions

Some load-bearing walls belong to lightweight walls, although they belong to lightweight walls, but their load-bearing capacity can not be ignored, we also need to see it as a load-bearing wall, so usually do not hang on some overweight objects on the lightweight wall.

Similarly, wall cabinets installed in the home kitchen should not be hung on a lightweight wall. However, the cement used in decoration can improve the load-bearing capacity of the wall, and tiles can be laid on the lightweight wall. When decorating, it is best to lay a layer of steel mesh on the wall, and then use cement mortar to smooth the steel mesh, and then seal it with gypsum board, which is also the safest cooking.

No, the load-bearing wall refers to the wall that supports the weight of the upper floor, which is a black wall on the engineering drawing, and will destroy the entire building structure if it is knocked out; Non-load-bearing wall refers to the wall that does not support the weight of the upper floor, only plays the role of separating one room from another, and is a hollow wall in the engineering drawing, and whether there is such a wall has no great impact on the building structure.

During the construction of the building, the main concrete structure is done first, and then the secondary structure is made. The wall under the beam belongs to the secondary structural engineering, which plays the role of dividing the room and sealing it. Not a load-bearing wall.

The concrete columns and shear walls of the main structure are the load-bearing structures. Hope mine is helpful to you. Have a great day.

Can the load-bearing wall under the beam be removed by 50 cm.

The wall under the beam belongs to the secondary cave construction project, which plays the role of dividing the room and sealing it. Not a load-bearing wall. The concrete columns and shear walls of the main structure are the load-bearing structures.

Hope mine is helpful to you. Have a great day.

Hello, my old house is a brick and concrete structure, a total of three floors, all are floor houses, now redecorate, you can remove 50 cm of the wall under the beam on the first floor.

Hello, dear, if the brick-concrete structure can not be demolished, the brick-concrete structure is to roll the wall first and then pour the brother with beams. At this point, the wall is a load-bearing structure. The 50 cm wall can be reinforced first and then removed. I hope it will help you.

Hello, glad to answer for you! For the load-bearing wall, if it is only dismantled without knocking on or damaging the load-bearing beam, it will generally not affect the safety of the building structure. However, it should be noted that load-bearing walls are important components that support floors and roofs, and it is important to understand how much they contribute to the bearing of the entire house structure before demolition.

If the original load cannot be borne after demolition, it may lead to serious consequences such as tilting, cracks and even collapse of the house. Therefore, before dismantling the load-bearing wall, it is recommended to have a professional engineer evaluate and design, and to dismantle it under the guidance of a qualified construction unit. At the same time, it is also necessary to pay attention to safety precautions to avoid the threat and injury caused by the building debris to the construction workers and the surrounding residents.

It should be noted that this is a very important construction project, and it must be carefully considered before construction to ensure the safety, quality and effect of construction.