The lid of the cup is stuck in the cup, how to take it out without destroying it

Updated on society 2024-07-13
12 answers
  1. Anonymous users2024-02-12

    Hello, first try to copy to the right and shake it to see if you can balance the lid, if it doesn't work very tight, then fill the cup with water, and then shake it to see if it can relax. If it really doesn't work, then take out the dish soap with a smooth, this is not difficult, as long as you are careful, you can try a lot of ways to take it out.

    Jinhefeng Industrial Electric wishes you good luck!

  2. Anonymous users2024-02-11

    Apply dish soap.

    Try to see if you can turn a hundred movements, the mouth of the cup is not absolutely round, turn to a slightly wider place to take out the degree. When holding it, don't push through the gap in the lid, but pull it out from the round side.

    Then there is pouring boiling water to heat it, then pouring it with cold water, and trying to answer it with hot expansion and cold retraction, but the porcelain basically has no elasticity. You can try both, maybe.

  3. Anonymous users2024-02-10

    The lid of the cup can be snapped in, indicating that the rim or lid of the cup is not perfectly round. That is to say, there are big places and small places. So you can apply some soap to the rim of the cup, then calm down and try to turn the cup (the lid does not move) or the lid (the cup does not move) until it is taken out.

  4. Anonymous users2024-02-09

    There are two ways to remove the lid without breaking the cup:

    1.Shake the cup head-down so that the object stuck in the lid falls to the bottom of the cup.

    2.Insert a long, slender needle or small spoon in the gap between the lid of the cup and gently push the object stuck inside until it falls. Then gently unscrew the lid.

  5. Anonymous users2024-02-08

    Apply dish soap and try to turn it, the mouth of the cup is not absolutely round, turn it to a slightly wider place and take it out. When holding it, don't push through the gap in the lid, but pull it out from the round side.

    Then there is pouring boiling water to heat it, then pouring it with cold water, and trying to use the method of thermal expansion and cold contraction, but the porcelain basically has no elasticity. You can try both, maybe.

  6. Anonymous users2024-02-07

    Hello, first try to shake it to the right to see if you can balance the lid, if it doesn't stick very tightly, then fill the cup with water, and then shake it to see if it can relax. If it really doesn't work, then take out the dish soap with a smooth, this is actually not difficult, as long as you are careful, you can try a lot of ways that you think can be taken out.

    Jinhefeng Industrial Electric wishes you good luck!

  7. Anonymous users2024-02-06

    Heat the cup (put the cup in hot water, don't get water inside!) )

  8. Anonymous users2024-02-05

    The lid of the cup is stuck in the cup, how to take it out without destroying it

    1. Hello, you can pour oil or water into the cup, and then tilt the cup until it is flipped to accompany the change, and it should be able to be taken out. The effect of oil is better than that of water, so choose a thinner oil. You can also try pouring ice water in the middle of the cluster; 2. The cup lid can be stuck in, indicating that the cup mouth or cup lid is not perfectly round.

    That is to say, there are big places and small places. So you can apply some soap to the rim of the cup, then calm down and try to turn the cup (the lid does not move) or the lid (the cup does not move) until it is taken out. 3. Put the whole cup in the water, heat it slowly, and as the water temperature in the cup gradually rises, the lid of the cup will slowly rise, and finally it will come out automatically.

  9. Anonymous users2024-02-04

    Prepare a basin of water and soak the cup in water. When the water in the cup is just at the bottom of the jammed cup, take it out. Open the fridge and put the cup in the freezer to freeze.

    When the water in the cup is completely frozen, take out the cup and place it upside down on the table and wait for the ice to melt. Once the ice has melted, take out the cup. This method takes advantage of the principle that the water freezes and increases in volume to push the upper cup out.

  10. Anonymous users2024-02-03

    1. Water cup method

    Prepare a basin of water and soak the cup in the water. The water will go through the gap in the cup and into the cup, and the water in the cup will be taken out just enough to reach the bottom of the jammed cup.

    2. Freezing cup method

    Open the fridge and put the cup in the freezer to freeze. When the water in the cup is completely frozen, take out the cup and put it upside down on the table and wait for the ice to melt. Once the ice has melted, it's time to take out the cup.

    Using the principle of heat shrinkage and cold expansion of water when it is lower than 4 degrees, the stuck cup will be brought up as soon as the water expands when it freezes, so that I can easily take out the cup stuck inside.

    How to care for the glass

    Soaking the newly bought glass in cold salted water and simmering it can enhance the hardness of the glass and make it less likely to break. In addition, before pouring boiling water into the glass, put metal tableware into the glass, such as a steel or aluminum spoon, and then pour boiling water into the glass, the glass is not easy to break.

    It is best to wash the glass once a day and then dry it. When cleaning the cup, not only the mouth of the cup, but also the inner wall of the glass should be cleaned, because if you don't clean it often, a lot of bacteria and dirt will precipitate inside.

    If the surface of the cup is too greasy, do not use dish soap, squeeze it on the toothbrush with toothpaste, and brush it back and forth on the quilt, that is, remove the dirt, and will not make scratches on the glass, killing two birds with one stone.

  11. Anonymous users2024-02-02

    Summary. At.

    The gasket inside the lid of the cup keeps falling out, how to solve it.

    At. What to do if the mat is old.

    First of all, you can find two or three rubber bands, scald them with boiling water and dust, and let them cool and wrap them together; 2.Then put the rubber band directly into the water cup, where the original rubber ring was placed, and tighten it tightly with your hand; 3.Of course, you can also pull a piece of plastic wrap, rub it into a slender strip with your hand, and then put it into the position of the inner rubber ring, and pinch it with your hands. Thank you.

  12. Anonymous users2024-02-01

    You can put a layer of balloons on the lid of the thermos cup to unscrew it off, and the following are the specific steps for leak detection:

    Tools required: One balloon.

    1. First prepare a balloon.

    2. Blow up the balloon.

    3. Squeeze the bottom of the inflated balloon towards the lid.

    4. Deflation while squeezing, the gas is gone, and the balloon is put on the lid of the cup.

    5. At this time, twist the lid of the cup firmly.

    6. It can be seen that the lid of the thermos cup is unscrewed, and the effect is good.

Related questions
10 answers2024-07-13

You can rest assured that if the fish bones stick into your gums, you'll notice it yourself! If it doesn't, the gums won't react! It's like putting sand in your eyes! >>>More

16 answers2024-07-13

It's a virus in the card, not the card reader. It is possible that your computer has also been infected with the virus in the card, usually this virus cannot be killed, it has already arrived in your computer, and there is a virus that can claim the hardware device. Jianyi, you reinstall the system and remove the card from the DOS first, you are useless in the original computer. >>>More

8 answers2024-07-13

If the pepper is stuck in the throat, it is recommended that the patient go to the hospital to remove the foreign body under the guidance of a professional doctor. >>>More

13 answers2024-07-13

Possible causes and solutions:

One, the memory card is bad, so it can't be displayed and can't be read. See if you can read it on the computer, if not, it's broken, just buy a new one. >>>More

17 answers2024-07-13

The fully live forum has an avatar patch made by the master himself, which should be much more like the original live one. >>>More