If you want to wash the yellow and white tiles, how should you clean them?

Wipe the tiles with baking soda. If the gap is small, you can take an old toothbrush and clean the gap, and you will find that the tile becomes the same as new. Hurry up and give it a try.

Like this effect is very good, some of the quality is poor, saying that the porcelain is not porcelain, saying that the glaze is not glaze, the effect is not very good, and there are a few traces with a steel wool ball, which means that the quality of the porcelain is worse, and it can only be replaced.

Bleaching actually has the effect of disinfecting water. The laborious way is to buy a cheap toothpaste, and it will be very clean to brush slowly with an old toothbrush, and use high-pressure water to rinse it after brushing. 5-10 ml of alcohol, a small amount of washing liquid, 10-20 grams of baking soda until the water is full, shake evenly, spray the surface of the tile with a watering can, brush it with a brush after about five minutes, and then rinse it with water.

It is not recommended to use steel wool balls, as it will damage the tile surface.

Buy regular tile cleaners from the Internet, use different plastic brushes to clean all kinds of stains and mold after spraying, and rinse with water after cleaning thoroughly; Limescale and stubborn urine stains and oxidized metal stains that are common in the bathroom, such as acidifying cleaners. Alkaline cleaners can remove all kinds of animal and vegetable greasy stains and mechanical oil stains, and can remove the wax layer from the floor. Such as special enhanced oil cleaner; Strong waxing water, etc.

Go to the pharmacy to buy two bottles of 84 disinfectant and come back, first sprinkle the tiles of the toilet with water and then sprinkle 84 disinfectant, and after half an hour, then rinse them with water.

The rust removal effect of Kelin rust remover is due to the action of inorganic acids, it is composed of surfactants and preservatives from non-ion sources, the product does not contain hydrochloric acid, and the surfactants contain the corresponding biodegradable detergents, which meet the legal standards for surfactants. Using a multi-purpose stain remover, this method will keep the tile surface clean and will not damage the tiles. Third, spray tile cleaner on the tiles, let them sit for a while, and then use a clean rag to wipe the tiles clean.

You can mix vinegar and salt, add a little water, dip it in a rag, and gently wipe the yellow area of the tile, but do not use a wire brush, so that it is easy to rub off the traces of the tile. After wiping, clean with a clean rag.

You can buy some laundry detergent that specializes in washing tiles, and you may not be able to wash your clothes very cleanly with ordinary laundry.

You can sprinkle some 84 disinfectant on the tiles, so that the tiles can be washed white, and they will be cleaned very clean.

In fact, we can make some detergents ourselves, such as adding liquor, white vinegar, baking soda or disinfectant, which will play a good role.

In fact, you can also buy some edible agents that are specially used to clean tiles, if there is an effect, you can also use it like this, and if there is no effect, you can also replace the tiles again.

1. Multi-functional detergent. Tiles are often stained by oil, rust, etc., especially at the joints, which are more likely to harbor dirt. In order to keep the porcelain surface clean and undamaged, a multifunctional stain remover can be used.

After cleaning, you can brush a waterproof agent on the joints, which can prevent the growth of mildew, hail and coarse bacteria and water penetration.

2. Solution of sulfuric acid or hydrochloric acid. Use a strong acidic solution, drop it on the surface of the brick and wipe it. If the general yellowing is not very serious, you can use vinegar and wipe it several times.

3. Use a mixed solution of salt and vinegar. You can take an appropriate amount of edible salt and add water to make six percent of the brine, and then add a small amount of vinegar to scrub the tiles, and the effect is also good.

4. Use acidic detergents. Acidic cleaners are effective in removing many stubborn stains, such as limestone and cement stains.

After the baptism of the tile, the surface of the tile is prone to scale and oil stains, especially in the seams. Therefore, when cleaning tiles, it is recommended to use a stain remover to clean the surface thoroughly.

<> "In everyday life, white tiles can be seen everywhere. So the question is, what to wash white tiles with when they are yellow? How to thoroughly clean and maintain white tiles? Let's take a look.

White tiles are yellow, with what to wash white.

Toothpaste is a must-have daily necessities at home, in addition to brushing teeth, toothpaste can be very powerful in cleaning, for some yellowed tiles, it is recommended to use toothpaste to clean. The method is very simple, for example: you can apply an appropriate amount of toothpaste to the yellowed tiles, and wipe it repeatedly with a steel wool ball and a toothbrush, and finally rinse it again with water.

In addition, you can also use a solution of sulfuric acid or hydrochloric acid to wash the whitening, first we only need to put a few drops of this solution on the yellowed tiles, and let it stand for a few minutes, and then wipe it clean.

How to thoroughly clean and maintain white tiles.

The white tile is dirty, the general way to use more is to use laundry detergent or detergent to clean, first use a clean towel dipped in an appropriate amount of laundry detergent or detergent next to the fierce beard, wipe all the walls and floor tiles with stubborn stains, and then wipe with a rag dipped in water 1 time, and finally clean the rag again after washing it, so that the clean tile is not only clean, but also has a fragrance.

Then you can use a special tile cleaner to clean, for the wall and floor tiles and some stubborn stains in the bathroom must be cleaned with a special tile cleaner, so that it can be cleaned and will not hurt the brick surface. As long as you spray lightly on the stained parts, and then wipe it with a rag after 1 minute, it can be cleaned immediately, saving time and effort, and the key is that it will not hurt the tiles.

It is very simple and generous and decorative, but it is inevitable that the white tiles will be yellowed after a long time, we must know that even if it is a piece of paper for a long time, it will naturally turn yellow, and white tiles are no exception, so what should I do if the white tiles are yellow? Today, I will explain the cleaning and maintenance methods of tiles for the band, so that everyone's tiles will be whitened again.

1. Clean white tile toothpaste

Toothpaste is a must-have daily necessities at home, in addition to brushing teeth, the cleaning function of toothpaste is very powerful, for some yellowed tiles, you may wish to use toothpaste to clean, you can apply toothpaste on the yellowed tiles, with steel wool balls and toothbrushes to wipe repeatedly, and finally filter with water, I believe that the white tiles can be whitened again.

2. Laundry detergent cleaning

Like toothpaste, laundry detergent is also a must-have for the family, in the process of brushing yellowed tiles, you can use laundry detergent plus white vinegar, for yellowed tiles, cleaning is very obvious, you can try it yourself.

3. Multi-functional detergent

Detergent has the unique advantages of green environmental protection, non-toxic, non-corrosive, no peculiar smell, strong detergency, sterilization and disinfection, if the tiles at home are yellow, go buy multi-functional detergent bar, use a toothbrush to dip some detergent paste to the yellowing place to scrub, you can also use a little vinegar to assist, after removing the dirt, brush a waterproof agent with a brush in the gap, which can not only prevent water seepage and prevent mold growth.

Yellowing of tiles is a common problem and can usually be cleaned up using several methods:

Use bleach: Pour an appropriate amount of bleach over a clean rag and gently wipe the surface of the tile to remove the yellow dirt from the tile. It is important to note that bleach may damage some types of tiles, so it needs to be tested before use.

Use vinegar water: Pour an appropriate amount of vinegar on a clean rag and gently wipe the surface of the tile, which can also remove the yellow dirt on the tile. Vinegar water has the effect of sterilization and descaling, which is harmless to the human body and is a relatively safe cleaning agent.

Use lemon juice: Pour an appropriate amount of lemon juice on a clean rag and gently wipe the surface of the tiles, which can also remove yellow dirt from the tiles. Lemon juice contains citric acid and calcium, which can react with the dirt on the surface of the tiles to remove them.

Use a professional cleaner for the limbs: If the above methods cannot effectively remove the yellow dirt on the tiles, it is recommended to buy a professional tile cleaner and use it according to the instructions on the instructions. It is important to note that some professional cleaners may require special solvents or additives, so it is necessary to read the instructions carefully before use and use them as directed.

In conclusion, yellowing of tiles is a common problem, and different cleaning agents and methods can be used to remove the yellow dirt from the tiles to varying degrees. It is advisable to clean the tile surface frequently, keep it clean and hygienic.

The yellowing of tiles can be caused by the accumulation of dirt and limescale over a long period of time. You can use a professional tile cleaner or a homemade cleaner such as a white vinegar and baking soda mixture. Spray the detergent on the surface of the tile, wipe it with a brush or sponge, and rinse it off with clean water.

If the dirt is stubborn, you can use a toothbrush or steel wool ball to gently wipe it off. After cleaning, remember to dry the tile surface with a clean towel to avoid water stains.

<> "How to clean up the yellowing of tiles.

After the tile has been used for a long time, the surface will inevitably turn yellow, which will affect the overall aesthetics, so how to clean up the yellowing of the tile? Let's learn together.

First, how to clean up the yellowing of tiles

1. Sulfuric acid solution:First, drop the sulfuric acid solution on the surface of the yellowed area of the tile, then use a rag to wipe the yellowed area repeatedly, and then wipe it again with water. If sulfuric acid solution is not available, hydrochloric acid solution can be used instead.

2. Salt and vinegar mixture:First, mix salt and vinegar together according to the correct proportion, and stir well, then use a rag dipped in the mixture to wipe the yellowing area of the tile against aging and relapsing, and then wipe it again with water.

3. Multi-functional detergent:Buy a box of multi-purpose stain remover online or in a physical store, then apply some multi-purpose stain remover to the yellowed area of the tile, then wait for about two minutes, then use a toothbrush to repeatedly wash the yellowed area, and finally use a rag dipped in water to wipe it clean.

4. Tile cleaner:Buy a bottle of tile cleaner online or in a physical store, then spray some tile cleaner on the yellowed surface of the tile, then wait for a while before using a rag to wipe the yellowed area repeatedly.

Second, what are the skills for cleaning bathroom tiles

1. If there are water stains and dust remaining on the bathroom tiles, you can use a rag dipped in some soapy water to wipe it, if there is paint remaining on the surface of the tile, you should first apply some water in the paint position, and then use a rag to wipe it repeatedly.

2. If there is dirt left in the gap of the tile, you should use a soft brush dipped in some toothpaste for repeated scrubbing, and then use a clean rag to dry it. When cleaning the cracks of the tiles, be sure to dry the water in time, so that the water can not remain in the gaps, otherwise the inside of the gaps is prone to mold, blackening and other phenomena.

The above is a detailed introduction to how to clean and clean bathroom tiles when the tiles are yellow.

Yellowing tiles are cleaned with toothpaste and laundry detergent.

1. Use toothpaste: The tiles appear yellow, and you can use toothpaste at home. Because the cleaning factor in the toothpaste can effectively remove the macular on the surface, just like brushing teeth, it has a cleaning effect.

First of all, you need to wipe the surface of the tile, then apply toothpaste to the yellowed surface, wipe it repeatedly with a soft toothbrush, dry it with water, and the white tile will come back.

2. Laundry detergent: You can use laundry detergent, add baking soda and white vinegar, you can remove the macula, you can also disinfect and sterilize, and the cleaning effect is also obvious.

Precautions for tile maintenance

1. Pay attention to keep the surface of the tile clean. If there is too much dust, it will feel slippery. If there is a colored liquid dripping on the surface of the tile, it should be scrubbed in time to prevent contamination of the brick surface.

2. Be careful when moving furniture, especially those with metal corners or rubber pads, be careful to scratch the brick surface, and try to pad non-slip gaskets under the feet of the furniture.

3. If the surface of the tile is polluted by cement or yellowing, a thin layer of concrete cleaner can be used. The cleaning agent is suitable for cleaning the thin layer of cement on interior and exterior wall tiles, clear water bricks, plaster, lime slag and clay products and natural stone.

4. The wall tiles are cracked or uneven and need to be replaced and repaired: carefully break the tiles that need to be replaced, then pry open the tiles around them, take out the tiles that need to be replaced, and repair them again. If you do not stick the bricks for a long time and the cement on the wall is not completely dry, you can carefully pry open the cement and paste it with cement slurry.

If the cement is completely dry after a long period of use, you can use a special tile adhesive for pasting.