Flooring is a very important process, is plastic flooring suitable for home use?

Buying a house has always been a major event in the hearts of Chinese people, and it is often possible to spend a lifetime of savings because of buying a house. I finally bought a house, and decoration is also very important. When it comes to buying a house, we have to talk about the decoration of the house, many people have a headache in the selection of materials when decorating, and we need to look good and comfortable when choosing materials, and more importantly, we need to be environmentally friendly.

When we decorate, the most on the market is ceramic tiles and solid wood flooring, and now there is a kind of plastic flooring, when the plastic floor was first introduced, most of them are used in some public places, and now it is also used in the home, mainly because of its stability, strong anti-slip and easy to take care of, so the plastic floor is very suitable for home use. <>

When choosing plastic flooring, we need to master the following skills, first of all, we need to choose environmentally friendly materials, to see if he is a three-no product, we must choose plastic flooring that meets national standards after environmental protection registration. Looking at his quality, it is necessary to choose pure natural and high-density materials, and it is best to have a product quality inspection certificate. In addition to the above two points, we also have to look at his after-sales service, after all, plastic flooring is not very common in the current home, we must choose a brand with perfect after-sales service, so as to ensure the quality of the product.

Plastic flooring has many advantagesThe elasticity of plastic flooring, as well as the decoration and anti-slip properties are very good, and it is also relatively moderate, compared with other flooring materials, it has many advantages. Now there are more and more owners of plastic flooring, please remember that the most important thing is environmental protection, after all, people have been living in this space, every day in addition to work, eating and sleeping are in contact with plastic, so environmentally friendly materials are very important to the human body, for everyone's health must choose a brand with quality assurance. <>

After the use of plastic flooring is laid, we will feel very comfortable when we step on it, and every space can meet everyone's individual needs, I believe that more and more people will choose plastic flooring in the future.

Not suitable for domestic use. Plastic formaldehyde content is high, and household use is very harmful to the body.

It's also very suitable. This kind of floor is also very strong, and it is also very easy to clean, which is very suitable for home use.

Personally, I feel that it is not suitable for domestic use, because such a floor is easily deformed, and such a floor is also difficult to clean and easy to get wet.

It's very suitable for home use, and it's also very good, and the quality is also very good, and it's easy to clean, so it's very convenient.

Not suitable, this kind of floor is very impractical, ordinary people will not choose to use, and it also affects the appearance, it is really not cost-effective.

In today's flooring market, plastic flooring is becoming more and more popular. There are different methods for laying floors and floor tiles, so what is the process of laying plastic floors? Let's find out together!

1. Measure the size.

First of all, the size of the room needs to be measured, the measurement must be accurate, and then the plastic floor is cut according to the structural size.

Note: The width of the cut should be slightly larger than the required width, which is conducive to lap and trim when paving.

2. Indoor processing.

Before paving, we need to treat the indoor floor:

The first is cleaning, to remove the oil stains or dust and sand on the ground;

The second is flat, the convex position should be shoveled and smoothed, and the depression can be adjusted into a paste with 107 glue and cement at a weight ratio of 1:2;

Then use a spatula to level it, and then use sandpaper to level it after it is dry;

After the ground is flat, clean and dry, it can be glued and paved.

Renderings of plastic floor tiles.

3. Gluing. Gluing is a sequence before paving the plastic floor, and the tool should choose a toothed scraper. When gluing, it is necessary to apply glue on the ground according to the size of the floor leather, and pave a piece after coating, and proceed in this order.

A width of 10 cm should be left at the seam without gluing, this is to facilitate the treatment of the seam.

Renderings of plastic flooring.

4. Pave the floor.

After the ground is coated with glue and the stickiness is felt by hand, it can be dismantled and paved. Pay attention to aligning the edges when sticking to the floor, and use a long-handled brush to drive out and compact at any time. The joints of the floor should generally be spliced by overlapping cutting, and the width of the overlap should be about five centimeters.

Use a long steel ruler to align with the center of the overlap, cut along the ruler, and then remove the cut edge strip (note: there should be two edge strips, don't forget to take out the lower one), use a paint brush to repair the appropriate amount of glue at the seam position, and then use pressure roller wax to close and compact the seam. The residual glue extruded from the seam should be wiped clean to save the impact on the appearance.

Then apply a thin layer along the seam with seam fluid.

5. Inspection. We also have to check whether there are air bubbles in the wheel and whether it is flat. If there are air bubbles, you can use a syringe insert to suck out the air and then compact it. Use laundry detergent to remove any remaining glue marks on the floor leather; If it can't be removed, wipe it off with alcohol.

With the rapid development of science and technology, plastic flooring is widely used in public transportation, office buildings, medical treatment, shopping malls, sports venues and other buildings. Plastic flooring is an energy-saving material, divided into Anshi, Anfa, Antong and other series, the construction only needs a utility knife to arbitrarily cut out the designer's ideal ground artwork. So what are the requirements for plastic floor paving and what is the construction process of plastic flooring.

Plastic flooring paving requirements:

1. The test result with a hardness tester should be that the surface hardness of the base layer is not less than MPa.

2. For the construction of plastic flooring materials, the unevenness of the base layer should be less than 2 mm within the range of 2 meters, otherwise a suitable self-leveling should be used to level the rotten sensitive line.

3. Use a thermohygrometer to detect temperature and humidity, and the indoor temperature and surface temperature should be 15, and should not be constructed below 5 and above 30. The relative air humidity suitable for construction should be between 20% and 75%.

4. Use a water content tester to detect the moisture content of the base layer, and the moisture content of the base layer should be less than 3%.

5. The strength of the base should not be lower than the requirements of the concrete strength C-20, otherwise the self-leveling suitable for the ballast branch should be used to strengthen the strength.

Plastic flooring construction process:

1. Dump the stirred self-leveling slurry on the construction floor, it will flow and level the ground by itself, if the design thickness is mm, it needs to be scraped slightly with the help of a special tooth scraper.

2. Then the construction personnel should wear special spikes, enter the construction ground, and gently roll on the self-leveling surface with a special self-leveling deflating roller to release the air mixed in the stirring to avoid bubble hemp surface and interface height difference.

3. After the construction is completed, please close the site immediately, prohibit walking within 5 o'clock, avoid heavy objects within 10 o'clock, and lay the plastic floor after 24 o'clock.

4. In winter construction, the laying of the floor should be carried out after 48 hours of self-leveling construction.

5. If you need to carry out fine grinding and polishing on self-leveling, it should be carried out after 12 o'clock of self-leveling construction.

About the plastic floor paving requirements and the plastic floor construction process is introduced to you here, you will find that in fact, the plastic floor is easy to install, if the ground flatness meets the requirements, you only need to use a special plastic floor adhesive, you can do it yourself. It can be used normally 24 hours after the installation is completed.