What does it look like to switch from water to natural gas?

It works, because it's all plumbing cycles; If the main pipe of the original boiler heating is advanced in the kitchen or balcony, you can directly install the gas wall-hung boiler, which does not need to be changed, because the gas wall-hung boiler is best installed in the kitchen and balcony, which is safer. It feels like it should be changed, and this problem depends on the structure and installation of the room. The first level of gas wall-hung boiler is higher, the initial installation cost is higher, and the family use cost is higher because of the large amount of gas, which is more suitable for families with a short time at home.

You can find a dry plumbing shop to find someone to see, explain your meaning, and the installer will explain it to you more clearly on the spot.

If the main pipe of the original boiler heating is advanced in the kitchen or balcony, you can directly install the gas wall-hung boiler, which does not need to be changed, because the gas wall-hung boiler is best installed in the kitchen and balcony, which is safer. The changes will not be too big, the problem depends on the structure and installation of the room.

If the heating pipe in your home is the same as the heating pipe of someone else's home (up and down), you must install the pipe yourself and use a wall-mounted gas stove. If you have an inlet and return pipe in your plumbing tube well, you can install a gas wall-hung boiler with little change. Do you understand?

If it is a unit that burns natural gas for heating, or takes the previous pipeline, there is no difference, but it is estimated that the unit will still not save money.

If you have a home heating unit that uses natural gas, you will need to install a wall-hung boiler that is connected to the heating pipes in your home, or you can lay a separate pipe (but this is a hassle).

Maybe it's a natural gas boiler.

Underfloor heating can be changed to natural gas heating.

1. Just add a small natural gas boiler. Nuclear transport.

2. Floor heating is a system, which is divided into heat source, temperature control, and floor heating pipe circuit, which can be freely matched. The heat source can be central heating, or it can be a wall-hung boiler, or a heat pump, and natural gas is a wall-hung boiler.

3. Natural gas heating is to install a wall-hung boiler in the kitchen or balcony, and the wall-hung boiler burns natural gas to achieve the purpose of heating.

4. Advantages of natural gas floor heating: the heating time can be set freely, and it can be turned on and off at any time; There is no radiator exposed in the room, and the usable area of the room can be increased by 2% to 4%, which is convenient for decoration and furniture.

Floor heating cannot be changed to natural gas heating, and electric heating can only be water heating or electric heating.

Floor heating is divided into two categories: water floor heating and electric floor heating from the thermal medium, and wet floor heating and dry floor heating from the pavement structure.

From the surface decoration material, it is divided into floor type floor heating and floor tile type floor heating; Functionally, it is divided into ordinary floor heating and far-infrared floor heating.

Private individuals are not allowed to change the heating equipment and heating methods, and the collective transformation is also carried out by the local heating administrative department, and the provincial and municipal heating regulations have clear provisions.

Taking Jilin Province as an example, according to the "Jilin Provincial Urban Heating Regulations", it is stipulated that:

Article 16 Heat production enterprises and heat management enterprises shall ensure heat supply in accordance with the heat supply contract, and when the heating facilities fail, they shall actively carry out emergency repairs such as Changpin, notify the users in a timely manner, and compensate the heat business enterprises or users in accordance with the heat supply contract.

Article 17 Thermal business enterprises shall announce the promised service standards and quality to the public, set up and publicly report for repairs and complaints, and deal with the problems reported by users in a timely manner.

Article 25 Heat production enterprises, heat management enterprises, and housing property rights units shall regularly inspect and maintain the heating facilities under their respective management to ensure normal operation.

Article 29 In addition to the reasons of the heat management enterprise, the property owner shall entrust the maintenance and bear the maintenance costs for the failure of the heating facilities in the indoor rapid rush of residential users.

OK. The thermal efficiency of the general boiler is 80 97%, except for the condensing type, and the energy efficiency ratio of the general heat pump type air conditioning is more than 3, that is, the efficiency is 300%, and the energy saving must be that the water heating air conditioner is more energy-saving than the boiler, but it is also necessary to calculate that the air conditioner uses electric energy, and the boiler generally uses gas, and 1m gas is equivalent to about 8 10 kWh of electricity.

The working principle of the radiator is to use the boiler to heat the circulating water, and then connect to the radiator through the pipe, and finally output the appropriate temperature through the radiator to form a certain indoor temperature difference, and finally carry out thermal circulation to make the whole indoor temperature rise uniformly.

Air heating, on the other hand, heats the water treated by water treatment equipment in a boiler to evaporate it, and heats the room through the evaporated water vapor. Water vapor transfers heat in the form of convection in the radiator to the radiator, and the radiator reflows back to heat the temperature through its own heat conduction.

There are two kinds of water heating radiators, one is a circulating water radiator and an electric water heating radiator, as long as it is not the latter, the original radiator can also be used for natural gas heating, the following is a detailed description:

Traditional water heating is to use a small boiler to boil hot water and install radiators for heating, for self-heating users, most of them use coal-burning stoves with water tanks, so that heating can also be used for cooking at the same time, killing two birds with one stone; However, it is circulated in the heating system through the method of water artesianism, that is to say, the water outlet of the heating furnace is the highest point of the whole self-heating system, and then the heating water enters each group of radiators through a certain downward slope, and the connection of the water outlet of all radiators also has a certain slope, and its direction is just the opposite of the former, and the water inlet of the water heater in the return water is lower than the water outlet of all radiators;

The method of natural gas radiator is to heat the circulating water through the natural gas wall-hung boiler, and let the heating enter each group of radiators under the pressure of the circulating pump for heating; Therefore, its installation is mainly beautiful and convenient, and there is no need to consider the size of the water potential;

So we conclude that purely as far as the radiator is concerned, as long as it is a circulating water radiator, it can be used, but because there is a certain difference in their pipe trends, whether the heating pipe can be used depends on whether the position of the coal-fired stove and the gas wall-hung boiler is consistent, if it is consistent, the heating pipe does not need to be changed, it can be used directly, if it is inconsistent, it is recommended to re-take the heating pipe.

Shandong Shen County coal to gas must install new gas sheets, hit the mayor 12345 no one cares.

Of course, radiators are currently the most widely used heating methods. German Lion King Radiator is a manufacturer specializing in the production of radiators, and has also been selected as one of the top ten brands of radiators. The gas wall-hung boiler is a dual-system household gas equipment, which can provide heating for the home, and can supply floor heating, radiators, fan coil units, etc.

It's the same, but the heating material of the water heater is different, and the radiator is the same.

It doesn't seem to work, say it's stressful, you need cast iron radiators.

Natural gas combustion produces heat, which is brought indoors through the medium of water. Gas heat heats the water temperature, and the hot water goes to the room through heating, hot air blower, air conditioner, floor heating, etc., and the heat heats the indoor temperature. The cooled water is heated in a natural gas water heater that circulates back and so forth.

1. Before each ignition, check whether the natural gas heater is leaking, and whether the inlet and exhaust ports of the room where the heater is set are open to ensure that it is used without air leakage, which is very easy to produce.

2 Do not operate natural gas heaters by people who are not familiar with the operation method, elderly people who are not very clear, teenagers and children, etc., and do not operate it by alcoholics. Improper operation methods can easily cause natural gas leakage or damage to gas pipelines.

3 Natural gas heater has the problem of oxygen consumption, should always open the window for ventilation, if the indoor oxygen content is too low, people are prone to breathing difficulties, and in serious cases, it will cause carbon dioxide poisoning, so it is necessary to open the window frequently for ventilation, so that the air can be fully circulated, so that the oxygen content remains average.

The design requirements of radiators and floor heating are different, so it is recommended to keep the radiators and install floor heating (unified radiators in the community). If the radiator is a separate one, it is recommended to change it directly to underfloor heating.

It is necessary to know whether the heating in the user's home is in use, whether it is self-heating (such as self-use coal-fired boilers, gas wall-hung boilers, etc.), or central heating (residential module boilers, coal-fired large boilers, municipal heating, etc.). The reason for this distinction is to figure out the water supply temperature, the water supply temperature of radiators is generally around 80, while floor heating can only use water below 60. If you use a wall-hung boiler, you should lower the temperature of the heating outlet, and if it is central heating, you should install an automatic water mixing device to reduce the temperature of the floor heating water supply.

See whether the ground in the user's home is allowed to be destroyed, and the indoor ground will be raised by about 10 cm after laying floor heating, which will hinder the opening and closing of the anti-theft door and indoor door. There are two ways to deal with it: it will be necessary to destroy the ground for excavation. Replace all the doors and recustomize.

After the underfloor heating construction, the floor should be redone, such as paving the floor tiles and wooden floors.

If you can determine the above two points, the rest of the work is simple. To sum up, the cost of changing radiators to floor heating will be relatively high, especially for old houses, which involves a lot, and the construction cost of renovation is even higher than the cost of floor heating construction of new houses under the same conditions.