How do you drain the water in the shower? How to drain the washing machine with water

1. If the washing machine cannot be turned off, the main reason is that the channel at the drain switch is blocked by the fabric fibers left over from long-term laundry, and some are blocked by foreign objects (such as socks) inside. You can remove the drain pipe, clean the drain switch with a clip, make sure the passage at the switch is clear, and then install the drain pipe and you're done. 2. If the switch is turned off or drained, 1. There are foreign objects or dirt stuck on the sealing mouth at the closing port, 2. The closing spring is damaged.

Maintenance method: Open the back panel of the washing machine, find the drain cable, unscrew the drain valve cover, pull out the sealing assembly, and clean up the dirt and foreign matter.

3. If the drain switch is broken: there may be a problem with the drain pump or program switch. If it's a fully automatic wave wheel washing machine, it may be a drain valve problem:

The traction solenoid does not suck, the drain valve trips, and the small tension spring in the drain valve is broken. It could also be that there is a problem with the program switch. If it's a two-cylinder washing machine, it may be a pull cord problem.

First raise the washing machine diagonally, for example, the washing machine drain pipe is on the left side, first lift the right diagonal of the washing machine, then lift the left diagonal of the washing machine, then lift the right diagonal, repeat the lifting diagonal many times, until the water in the washing machine is drained clean, and finally the water in the washing machine can be completely drained, which can protect the washing machine from drying, and also prevent the washing machine from rusting and damage.

The washing machine with lower drain raises the overall level of the washing machine by about 200 cm, so that the water can be drained.

If you want to drain the water in the water heater, there is a water outlet under the water heater, open it to that water outlet, and connect the pipe to drain it clean.

That thing is all relative, you can open the drain and drain it directly. Well, it's not realistic to try to clean it thoroughly, because you have to it every time. Messing with that thing, it's been discussed for a long time, and it's not good for the machine, and it's broken after a long time.

Hello dear and happy to answer your <>

How to drain the water in the washing machine is as follows: 1Plug in the power plug of the washing machine and turn on the power button of the washing machine. 2.

When the washing machine is empty or there is water in the liquid crack, 3At this time, when we want to drain the water in the washing machine bucket, click the program button and select "bucket air drying". (The name of the different washing machine function roughly means this) 4

Then click the start button, the washing machine will automatically remove the water inside, fully automatic can open the back cover after the power is off, there is a solenoid valve below, there is a column shaft in the middle, push it in the direction of the solenoid valve, open the drain valve, and let go after the water is discharged; After the semi-automatic power is off, open the back cover, and there is a round cover on the pipe below with a plastic rope, just lift it up; I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Best wishes to you; Happy life, everything goes well [warm] [warm].